ACCESSORIES
Description Antenna DCF77
■
Time synchronisation with DCF antennas. To ensure good reception, do not install the antenna in cellars or on distribution boxes. Connection is made via separate 2-wire, unscreened high-voltage power cable (max. 100 m), up to 10 Theben devices can be connected. Polarity, short-circuit and interruption of the antenna circuit are each visually displayed.
Suitable for
Type
Article number
TR 641 S DCF TR 642 S DCF TR 644 S DCF SELEKTA 173 DCF
Antenna DCF77
9070243
TR 648 S DCF KNX TR 644 S DCF KNX ZS 600 DCF KNX
Antenna DCF77 KNX
9070271
TR 611 top2 RC LUNA 121 top2 RC LUNA 122 top2 RC SELEKTA 171 top2 RC TR 641 top2 RC TR 642 top2 RC TR 644 top2 RC
Antenna top2 RC-DCF
9070410
TR 611 top2 RC LUNA 121 top2 RC LUNA 122 top2 RC SELEKTA 171 top2 RC TR 641 top2 RC TR 642 top2 RC TR 644 top2 RC
Antenna top2 RC-GPS (Available July 2010)
9070610
■
All DIN rail installation devices
Front panel kit
9070001
■
TM 178 h SYN 168 h SUL 188 h SUL 188 g MEM 198 h SUL 188 hw TM 171 h SYN 161 h SUL 181 h
Terminal cover 52.5 mm
9070061
■ ■ ■ ■
Antenna DCF77 KNX
■ ■
Time synchronisation with DCF antennas for KNX time switches Installation see DCF77 antennas
Antenna top2 RC-DCF
■ ■ ■
■ ■ ■ ■
Time synchronisation with DCF antennas for top2 devices Installation see DCF77 antennas
■ ■ ■ ■ ■
■
Antenna top2 RC-GPS
Worldwide time synchronisation and positioning via receiving GPS satellite signal. The antenna is connected by a 2 wire cable (max. 100 m) to Theben top2 RC devices (up to 10 devices can be connected). A top2 GPS power unit (item number 9070892) is also required when connecting to TR 611 op2 RC, LUNA 121 top2 RC, LUNA 122 top2 RC or SELEKTA 171 top2 RC devices. No additional power un it is required when connecting to TR 641 top2 RC, TR 642 top2 RC, TR 644 top2 RC devices or several devices to one antenna. Positioning is possible with TR 641 top2 RC, TR 642 top2 RC, TR 644 top2 RC and SELEKTA 171 top2 RC devices.
■ ■ ■ ■ ■ ■ ■
Front panel kit ■
■
Front panel installation set is suitable for Theben DIN rail installation devices of 17.5 to 107.5 mm width. Walls from 1 to 5 mm thick
Terminal cover 52.5 mm
■ ■ ■ ■
Terminal box cover plate for assembly, sealable
■ ■ ■ ■ ■
228
Catalogue_EN_2010.indb 228
http
Additional technical data at: www.theben.de/product/ Article number
15.03.2010
17.03.10 18:28
1