FME Energy Guide

Oil • Gas • Petrochemical • Power • Cleantech

FME Energy Guide

2012 - 2013

D

Combustion

De Jong Combustion b.v.

Engineering, manufacturing and commissioning of industrial burner systems, mainly gas-fired.

HRI Installatietechniek b.v.

Engineering, implementation, operation and management of energy systems for buildings. Offsite energy management.

R&V Engineering b.v.

Engineering, manufacturing and commissioning of industrial burner systems, gas-fired and oil-fired.

De Jong Thermal Engineering b.v.

Engineering and implementation of process-integrated industrial energy systems.

A. de Jong Installatietechniek b.v.

Engineering, implementation, operation and management of energy systems for buildings.

Offsite energy management.

100% Efficiency

‘s-Gravelandseweg 390 - 3125 BK Schiedam T +31 (0)10 - 44 69 222 - F +31 (0)10 - 41 54 581 - www.dejong.eu - twitter: @adejonggroep

790.01.02 FME Energy Guide Adv. A4_2.indd 1 p02_adejong.indd 1

13-03-12 11:25 02-04-12 11:20

Foreword The Netherlands is a leading developer of technologies in the fields of gas, petrochemicals and renewable energy. Amongst our FME-members are many prominent suppliers in this energy industry – both conventional and sustainable – of whom you will find an overview in this edition of the FME Energy Guide. Allow me to tell a little more about this industry and these companies.

Quality and innovation are always in front.

The Dutch suppliers deliver exceptionally innovative products of excellent quality. They are specialised in manufacturing custom-engineered products. In addition, they offer outstanding service in the field of engineering, installation, assembly and maintenance.

It is with great pride to introduce these companies to you.

Dutch companies in general have always had an international scope. The enterprises in the fields of gas, petrochemicals and renewable energy are no exception to this rule. Nearly 85 percent is internationally active.

They are known for their innovative achievements, great reliability, financial stability and their strong communication. And because of these positive qualities, Dutch suppliers make an outstanding durable cooperation and lasting partnership possible.

This Dutch industry draws consiberable attention to the implementation of remarkable projects worldwide, the design and construction of advanced drilling rigs, drilling vessels, jack-up barges, diving support vessels, crane vessels, wind turbines and other mobile offshore units, as well as the introduction of new products and services.

Ineke Dezentjé Hamming – Bluemink President Association FME-CWM FME-CWM Association FME-CWM is the Dutch association of enterprises in the technological sector. The organisation represents 2,500 members in the metal, plastic, electronics and electrical engineering industries. These enterprises together employ a workforce of 225,000 in total. Joint annual turnover of member companies amounts to around € 60 billion euro with a direct export totalling at € 37 billion. We actively protect our members’ interests nationally and internationally, provide services to individual member companies and clusters of member companies, and support 120 trade associations.

FME ENERGY GUIDE 2012-2013

03-FME2012 voorwoord NEW.indd 3

3

4/4/12 1:28 PM

Components for air-cooled heat exchangers, engineered-to-order; (on-site) assembly and maintenance.

ENGINEERING Our engineers and technicians tailor air cooler components, including drives and fan configurations, to suit specific site conditions.

FAN HOUSINGS with aerodynamic elliptical inlet bell, up to 7300 mm diameter in steel, larger sizes in FRP. BEARING BLOCKS for motors from 5 to 90 kW, designed for prevention of alignment errors and minimum maintenance (lubrication interval up to 32000 hours).

LOUVRE DAMPERS individual units up to 3500 mm width and 7500 mm length; combinations for larger surfaces, in aluminium or steel, with manual, pneumatic or electric actuator.

PLENUMS AND ASSEMBLY design and construction of plenums and support structure in a variety of materials; assembly and test running of complete installations, including dynamic balancing of the fans.

ON-SITE MAINTENANCE service on drive components and fans by experienced field technicians.

More than 50 years of skilled know-how Our values: • solid engineering advice • quality products • on-time performance ISO certifi cation 9001:2008 SCC*/VCA* Rev.2008

p04_geha.indd 1

We are ready to be of service.

Our goal: long-term, mutually beneficial business relationships Please visit our website www.geha-holland.nl

Machinefabriek en Apparatenbouw Geha b.v.

Veilingstraat 52, NL - 7833 HN Nieuw-Amsterdam Phone: +31 (0) 591 307050 Fax: +31 (0) 591 553781 E-mail: info@geha-holland.nl

02-04-12 11:20

3

The Netherlands is a leading developer of technologies in the fields of gas, petrochemicals and renewable energy.

Amongst our FME-members are many prominent suppliers in this energy industry – both conventional and sustainable – of whom you will find an overview in this edition of the FME Energy Guide.

FME recently organised a rade mission to Hamburg for the offshore wind energy sector, giving Dutch companies the opportunity to make contact with energy companies, project developers and suppliers to German wind farms.

7

14

With LNG access via Gate, underground storage in Zuidwending and access to Russian gas via the Nord Stream pipeline, the Dutch gas supply has for the time being been secured.

Content

3

Foreword by Ineke Dezentjé Hamming – Bluemink President Association FME-CWM

7

Creating opportunities together, Maxime Verhagen, Deputy Prime Minister and Minister of Economic Affairs, Agriculture and Innovation

9

FME at State Visit in Abu Dhabi

11

Activity calendar Energy sector 2012

14

European gas network inextricable part of energy supply

19

Dutch Energy Solutions & Cleantech Holland

20

Company profiles

71

Energy guide supplier matrix

FME ENERGY GUIDE 2012-2013

05-FME2012 inhoud NEW.indd 5

5

4/10/12 9:26 AM

Face the

A future where GEHO速 pumps transport your fly ash as dryly as possible Energy producers are held accountable for their environmental impact. Therefore, Weir Minerals developed the GEHO速 (T)ZPM pump to transport fly ash with less water to your disposal area. It works efficiently, saves energy and reduces costs. You obtain a particularly environmentally friendly solution, which has proven its value in practice time after time. The ashes harden out more quickly without much dust. The durability of the disposal area may be extended or the area will be released earlier as utilizable land.

GEHO 速 is a registered trademark of Weir Minerals Netherlands b.v. All rights reserved.

Future

Weir Minerals delivers a complete solution with GEHO速 piston diaphragm pumps.

A complete system which gives tailings disposal a completely different face.

If you want to learn more, look at the Weir Minerals website and understand what makes Weir Minerals the market leader.

email: weir@weirminerals.com

www.weirminerals.com

WEIR_Vliegas_met_QR.indd 1 p06_weir.indd 1

08-03-2012 16:56:22 02-04-12 11:20

Creating opportunities together FME recently organised a trade mission to Hamburg for the offshore wind energy sector, giving Dutch companies the opportunity to make contact with energy companies, project developers and suppliers to German wind farms. I very much welcome trade missions like this, since they are the best way to identify opportunities for Dutch companies and how they can be exploited. They also strengthen the position of the energy sector on foreign markets.

The energy sector is one of the Dutch economy’s top sectors. Thanks to its spirit of enterprise and innovation, this sector is truly outstanding, providing tens of thousands of jobs and occupying a strong position in Europe, with promising prospects in emerging markets. The Dutch government wants to help companies and research institutions in the top sectors strengthen their position and seize new opportunities.

That is why we are committed to promoting trade and investment, to strengthening the European internal market and to removing every obstacle we can for Dutch entrepreneurs operating abroad.

The Ministry of Economic Affairs, Agriculture and Innovation, its subdivision NL Agency, other ministries and the network of diplomatic missions are working together to support entrepreneurs and researchers abroad.

In our top sectors policy, companies and research institutions are themselves at the helm. They have drafted Innovation Contracts and Human Capital Agendas and have made plans for stepping up international activities. They have indicated how they plan to strengthen the Dutch energy sector, the research on which they intend to focus, how they will recruit enough qualified staff, and the markets they will target, with projected investments of three billion euros up to 2015. In this way, the Netherlands is developing new technologies, products and services and continues to lead the international field.

I call on you as entrepreneurs, suppliers and researchers to continue thinking in terms of opportunities, to look for developments to which you can respond and to create synergy by joining forces with other parties in the Netherlands and beyond. We want to know what we can do for your company, since together we can create even more opportunities. This Energy Guide is, in any event, bursting with them.

Maxime Verhagen Deputy Prime Minister and Minister of Economic Affairs, Agriculture and Innovation

FME ENERGY GUIDE 2012-2013

07-FME2012 verhagen.indd 7

7

4/4/12 4:41 PM

Keep your energy business running

• On- and offshore oil & gas, LNG, pipelines, refining and petrochemicals • Power plants, renewables, transmission and distribution substations

World leader in power solutions for energy markets • AC and DC power protection and control products over a 20 year lifetime • Unsurpassed engineering excellence • Ability to develop fully customized solutions • Personalized worldwide service and support throughout entire project life cycle: from FEED to refurbishment AEG Power Solutions GmbH Emil-Siepmann-Str. 32, 59581 Warstein-Belecke, Germany Tel.: +49 2902 763 0, Fax: +49 2902 763 680, info@aegps.com

www.aegps.com

1202 Anz_Energy Business Running_210x297mm.indd 1 p08_aeg.indd 1

07.02.2012 11:09:13 02-04-12 11:20

FME at State Visit in Abu Dhabi

Dutch Energy Solutions organised a mission to Abu Dhabi, which took place on January 7-10. The mission coincided with the state visit from Her Majesty the Queen, Prince Willem-Alexander and Princess Máxima to Abu Dhabi on January 8th and 9th, 2012.

Ruben Dubelaar was present on behalf of FME to manage the mission in an orderly fashion.

The mission consisted of fourteen companies, seven of these are FME members (Tradinco, Gemco, M&I Labtech, Hint, Petrogas, IMT, Dhatec and PowerPiping).

On Sunday, January 8th, the delegation of Dutch suppliers in the oil & gas industry presented itself to state energy company ADNOC in Abu Dhabi. This company is market leader in the field of crude oil and gas extraction, as well as in initiatives for storage, logistics and sustainable energy. This provides opportunities for Dutch suppliers in the oil & gas sector.

Long-term collaboration Since 2009, the Dutch companies have visited the United Arab Emirates, especially the ADNOC companies, several times. The purpose of these visits was to achieve a long-term collaboration and to respond to the developments in the Gulf Region, directed at innovation

and energy-efficient solutions. The most recent trade mission took place in May 2011.

Previous successes This approach has already helped various Dutch companies with establishing trade contacts. Gemco International, a supplier of industrial work sites, has for instance already been able to acquire a position by progressively advising local customers. Petrogas provides gas treatment units for capturing particulates from large gas flows. IMT, manufacturer of industrial lighting, hopes to sustainably and energy-efficiently shed light on oil platforms. René Peters, the delegation leader of the industrial mission and Director Gas Technology and Energy at TNO: “TNO has been involved in the Dutch Energy Solutions programme from the start. As the industry acts together in this multiannual programme, companies have opportunities to meet with end customers at the highest possible level in the Gulf Region.”

About Dutch Energy Solutions Dutch Energy Solutions is an initiative from the FME and IRO (branch organisation for the oil & gas industry), supported by the Ministry of Economic Affairs, Agriculture and Innovation’s 2g@there programme.

Thirty-two companies are members of the programme.

FME ENERGY GUIDE 2012-2013

09-FME2012 Dubai.indd 9

9

4/4/12 1:38 PM

Realising offshore energy infrastructure Van Oord is a world class dredging and marine contractor with over a decade of experience in the offshore wind industry as a leading marine installation contractor in North Western Europe.

Van Oord’s specialised division ‘Offshore Wind Projects’ offers both EPC main contracting and construction services to the offshore wind industry. It is part of our strategy to play an important role in the worldwide offshore wind energy market and to contribute to the CO2 emission reduction goals.

www.vanoord.com

Offshore Wind Projects Engineering

p10_vanoord.indd 1

Procurement

Construction

Equipment

Belwind Phase I

02-04-12 11:20

Activity calendar Energy sector 2012

Cleantech Outgoing mission Italy Autumn 2012 In collaboration with Link2Italy, Cleantech Holland is organising a follow-up mission to Milan. The investment climate Ondernemen for sustainableInternationaal energy in Italy is interesting. Enel Greenpower and project developers are therefore constantly looking for suppliers for the production or installation of sustainable Solar, Biomass and Wind Energy systems.

Samen grenzen verleggen

Outgoing mission Offshore Wind France September 24-27, 2012 * France will be developing five offshore wind parks off the coast of Normandy and Bretagne. A lot of the installation and maintenance work will be carried out by SMEs in the coastal regions. Contacts with potential partners are facilitated by the mission and a matchmaking programme.

Joint Trade Delegation PV Solar September 24-28, 2012 The PVSEC will take place in Frankfurt.

At the largest SolarPV trade fair, Cleantech Holland will www.fme.nl/internationaal host a Dutch pavilion, together with Holland Solar and the BOM. This is where suppliers of various systems and products for photovoltaic panels meet colleagues and potential customers.

Internationaal Ondernemen

Samen grenzen verleggen

Outgoing mission Smartgrids Belgium Autumn 2012 * A&B partners will organise an outgoing mission to Belgium based on the smartgrids theme. There are ample companies in the Netherlands that produce innovative products and services for both energy companies and the consumer market.

www.fme.nl/internationaal

FME ENERGY GUIDE 2012-2013

11-FME2012 kalender.indd 11

11

4/16/12 1:18 PM

CAN YOUR REPUTATION BECOME OUR RESPONSIBILITY?

At Vinçotte we take the reputation of our clients to heart.

It’s not surprising that when it comes to safety, quality and the environment, we are leaders in the fields of non destructive testing, pressure equipment inspections, inspection of cranes and hoisting equipment, electrical inspections etc.

Above all, we are close to our clients. Literally. Which is why we have subsidiaries near all major energy related and industrial sites in the Netherlands. And with more than 100 technical experts in the Netherlands, the international Vinçotte group now employs more than 2.500 employees in 13 countries.

Can we use our expertise to make your reputation our responsibility too? Then have a look at our website:

Safety – quality – environment

Vinçotte Netherlands: Breda - Rotterdam - Akersloot - Eemshaven - Geleen

p12_aib.indd 1

WWW.VINCOTTE.NL

YOUR REPUTATION IS MINE.

17-04-12 09:42

Outgoing mission Vietnam October 2012 Following a research that was carried out in 2011 on the opportunities in Vietnam, Cleantech Holland will organise an outgoing trade mission. During this trade mission, Dutch suppliers will be introduced to public institutions and project developers.

Outgoing mission Solar VS November 2012 The solar industry in the US is in full swing. With regard to the (regional) governmental level, sustainable energy is high on the agenda. The domestic production of cells and panels is highly encouraged, providing opportunities for (suppliers of) engineering and production systems.

Oil & Gas Workshop Market Developments Middle-East * May 11, 2012 Every year, FME organises several theme meetings for oil and gas suppliers about market developments, opportunities and possible export barriers in the Gulf Region. The meeting also provides an opportunity to exchange experiences.

Incoming mission Kuwait * April 15-18, 2012 The Dutch Energy Solutions Programme will organise a follow-up of the contacts with Kuwait. A delegation will be invited to meet with suppliers from the Dutch industry in the Spring of 2012.

Outgoing mission Qatar * June 2012 Qatargas is the largest producer of LNG in the world.

Dutch Energy Solutions has established contacts with Qatargas in 2011. A programme will be organised in 2012, in which Dutch players will have the opportunity to highlight products and knowledge to Qatargas and various contractors.

Outgoing mission Venezuela (ism NCH & IRO) * May 21-26, 2012 The Dutch embassy in Venezuela has facilitated exploratory talks between state oil company PDVSA and FME, IRO and NCH to extend the collaboration in the field of oil & gas. Through this mission, companies are introduced to potential partners in Venezuela.

Joint Trade Delegation Caspian region * Autumn 2012 FME is investigating the possibilities of organising an event in Kazakhstan. Due to the large oil & gas supplies in the Caspian region, a lot of new projects will be developed in the years to come, which will provide opportunities for Dutch suppliers.

Powergen June 12, 2012 FME has already been organising a joint pavilion at the Powergen Europe for many years. Powergen is held in Cologne this year. The event is intended for suppliers in the conventional, and since 2012, also in the sustainable energy sector.

For all our activities: www.fme.nl/internationaal

FME ENERGY GUIDE 2012-2013

11-FME2012 kalender.indd 13

13

4/16/12 1:18 PM

European gas network inextricable part of energy supply

With LNG access via Gate, underground storage in Zuidwending and access to Russian gas via the Nord Stream pipeline, the Dutch gas supply has for the time being been secured. Gasunie incidentally plays a role in all of these projects, which is not a pure coincidence. Chief Executive Officer Paul van Gelder believes that Gasunie’s role certainly does not end here. ‘On the contrary; the Dutch specialisms of wind, biomass, green gas and natural gas, in combination with the energy infrastructure lead to the fact that the Netherlands is excellently positioned to continue to play an important role in the

Paul van Gelder: ‘Gas and the European gas network will be an inextricable part of the energy supply in the future.’

future of sustainable European energy supply.’

Via her energy policy, the Dutch government is aiming at positioning the Netherlands as a central hub for gas in north-western Europe. This philosophy in policy is known as the gas roundabout. The policy is directed at improving competition in the gas market, guaranteeing the security of gas supply and greening the total energy mix.

Gasunie is one of the most important players in the ambition to make the Netherlands the focal point of the European gas supply. Apart from the fact that the transport system operator (TSO) supports the idea of the gas roundabout, as an independent supplier of gas infrastructure it is also involved in building a large part of the physical gas roundabout. The company is in this way strengthening the network in the Netherlands and northern Germany and is currently firmly expanding this network. But Gasunie also invests in areas in which balancing, diversification and security of supply are concerned. The company is, for example, involved in the construction of the Gate terminal, the Zuidwending 14

Natural Gas buffer, the pipeline connection between the Netherlands-England (Balgzand and Bacton Line, BBL), the pipeline between Germany and Russia (Nord Stream) and the Northern European pipeline (NEL) in Germany.

Paul van Gelder has been running the company for over a year now and he more or less hit the jackpot, as a large number of projects had just started speeding up.

The first half of the North-South Route was delivered immediately upon his appointment and the involved parties opened the Natural Gas buffer in the Zuidwending in Groningen in the beginning of 2011. This was followed by the opening of the Gate LNG terminal and Van Gelder was recently allowed to join leading figures such as Angela Merkel, Gerhard Schröder and Dmitri Medvedev for the official use of the Nord Stream pipeline.

However, the director also has to deal with setbacks.

The reconsideration of the Method Decisions of the Dutch Competition Authority (NMa) was certainly a huge

FME ENERGY GUIDE 2012-2013

17-FME2012 Interviewgelder.indd 14

4/4/12 12:50 PM

disappointment, as the supervisor has retroactively estimated the value of the Dutch gas network as being much lower, causing the transport fees to be lower as well. Although the period of appeal is still ongoing, the announced new tariff regulation obviously affects Gasunie’s plans.

A large number of projects has now been completed. Is the gas roundabout finished now?

‘No, although we – and others too – have invested a lot in recent years, the gas roundabout is certainly not completed yet. The gas roundabout is a philosophy, which in the next few years will continue to lead to new developments. As long as the energy market and the gas market are moving, the gas roundabout is moving along, even transcending borders. Gasunie invests on the basis of a concrete market demand. Until now, our market questions have mapped out new capacity requirements again and again. The European energy market is nevertheless continuing to develop at a rapid pace. The issues in the area of energy and sustainability are more challenging than ever before. The gas roundabout will therefore continue to develop and contribute to a cleaner future in energy that is affordable, reliable and feasible.

Guaranteeing the security of supply is an important cornerstone for the European energy policy. This can be realised for gas by spreading the supply routes and resources. Facilitating international gas streams, expanding the gassing capacity of the Gate terminal and expanding the gas transport capacity of the nets, including cross border capacity, are all examples that will benefit the security of supply. Besides from this, gas storages ensure the flexibility required for a sustainable energy supply. Relatively new is the emergence of LNG in the transport sector, especially the shipping and the freight transport. This offers possibilities for sustainability, as LNG as a fuel leads to a strong decrease in the emission of greenhouse gases.

The challenge for the coming years lies in the facilitation of the bio based economy, the emergence of green gas.

This requires an investment in collecting green gas via infrastructure, reprocessing of green gas into natural gas quality and gassing technology, the green gas roundabout.’

Many decisions are dependent on future development. Which scenarios does Gasunie work with to prepare itself for this future?

‘Gasunie obviously ensures that it is aware of the different demand and supply scenarios with regard to

energy in general, and natural gas in particular. These are established by renowned parties like CERA, IEA, WoodMackenzie and so on. Gasunie also has years of experience in the gas market, which gives the company a clear vision, based on existing studies and additional own research, on the market that, among other things, forms the basis for making strategic decisions.’

Does the market still affect these decisions?

‘In fact, the market demand is always leading in the end.

At the basis of all of Gasunie’s investments lies a solid market demand. This is the economic foundation that we build upon. It is currently organised in such a way that market parties reveal their future capacity requirements in the Netherlands via an open season every two years. The Dutch and German governments also have a prominent role in Gasunie’s investment decisions: on the one hand in the Netherlands via the Ministry of Finance as a shareholder, on the other hand via the policy departments, via the Ministry of Economic Affairs in both the Netherlands and Germany. Supervisors NMa and BNetzA also have a significant task.’

‘Market demand is always leading in the end.’

Can you give a glimpse into the future? What will be the role of gas in Europe in the years to come?

‘Gas and the European gas network will be a inextricable part of the energy supply in the future. The European Commission realises the great importance of gas. This also applies for the IEA in the recently appeared Energy Outlook, in which security of supply is one of the most important themes. Gas will continue to play a meaningful role in all scenarios. The borders between countries in Europe, between energy systems, between markets and between consumers and producers, will fade. It will be a completely integrated gas market, with investments in cross-border capacity, via which the gas can flow to all corners of the continent.

This creates a kind of virtual Gas Ring of Europe with branches to each EU member state. The final goal is a sustainable society, in which economy and ecology go hand in hand. Leading to this, there will be a complex interaction between companies, governments and consumers.

An important issue in Europe is that countries and companies get the chance to do what they are good at in FME ENERGY GUIDE 2012-2013

17-FME2012 Interviewgelder.indd 15

15

4/4/12 12:50 PM

Global footprint

Turn key power projects

Connectivity

Industrial solutions

Innovative cable solutions For industrial cable solutions, TKF focuses on

Our industrial cable portfolio covers a full range

plant owners, EPC contractors, electrical sub-

of cable solutions from low to high voltage,

contractors and distributors. TKF captures an

installation, instrumentation, optical fibre and

important position as a supplier to the chemical

submarine cables. Contact us for more information

and petrochemical industry due to its full range

on our turn key power cable solutions, including

of cables complying with all major international

engineering, project management, joints and

standards and strong local representations.

terminations, installation and testing.

TKF (BV Twentsche Kabelfabriek) P.O. Box 6, NL - 7480 AA Haaksbergen The Netherlands Tel.: +31 (0)53 573 22 55 - www.tkf.nl

p16_twentsche.indd 1 130312_TKF_AD_Oil and Gas FME Energy Guides.indd 1

02-04-12 13:28 11:20 13-03-12

the field of energy. Strong, efficient cross-border energy connections, via which countries are able to optimally link their own energy specialisms to one another, will ensure energy security and a strong position of the Netherlands within the European energy market. Clear steps have been made towards a free market by the European energy legislation. The era of large, integrated energy enterprises that are responsible for both the infrastructure and gas trade has come to an end. For these enterprises, the ownership of infrastructure will no longer have any strategic value, as ownership does not give sovereignty over the access to the net. As a result of this development, there will be an increase in dedicated gas infrastructure companies like Gasunie in Europe.’

Will the ownership of one’s own supplies still play a role in these developments, as this will decrease in the future?

‘Having one’s own supplies has played a significant role

in the development of the Dutch energy supply and the position that the Netherlands has established within Europe. The Dutch gas infrastructure has been created as a result of finding these supplies. The Dutch specialisms in wind, biomass, green gas and natural gas, combined with the energy infrastructure, lead to the fact that the Netherlands is excellently positioned to continue to play an important role in sustainable European energy supply in the future. Even if the country’s own supplies were to decline.’

Are the Method Decisions compromising the gas roundabout ambitions?

‘The new Method Decisions will have a negative effect on our operating income and are, in that regard, a deterioration with regard to the previous tariff regulation. We are currently still investigating the exact impact, as the Method Decisions include an extensive total package of rules and parameters that combined will determine the final effect of the new regulation.’

FME ENERGY GUIDE 2012-2013

17-FME2012 Interviewgelder.indd 17

17

4/4/12 12:50 PM

Dutch Energy Solutions Members Dutch Energy Solutions A. Hak International B.V. Assai Software Services BV Bronswerk Heat Transfer BV Brooks Instrument B.V. Dhatec B.V. Dovianus B.V. FIB Industriële Bedrijven FMC Technologies CDS Separation Systems Frames Gemco International Harsco Infrastructure Industrial Services BV Hint Engineering BV IMT B.V. InterDam Merford B.V. KEMA

Dutch suppliers in the oil, gas and power industry acting in a cluster.

In the year 1959 a huge gas field was discovered in The Netherlands. Combined with offshore oil production, this was the start of the development of a wide range of innovative, technical products and services. These developments were rapidly taken over by the international offshore industry, and the Dutch industries have built up an excellent reputation for innovation, reliability and quality ever since. More than 600 companies are active in the oil, gas and power industry. The Netherlands has Europe’s most extensive gas distribution network and ever increasing; new LNG terminals are under construction at the port of Rotterdam.

The Gulf State Region is the world’s largest energy producer and offers the Dutch supply industry numerous opportunities. Dutch Energy Solutions: Global Excellence, Local Performance is an export programme executed by FME and IRO, on behalf of the Dutch Ministry of Economic Affairs, Agriculture and Innovation.

The objective of the three-year programme is to enhance meaningful relationships and to intensify further business relationships between the Dutch Industry and oil, gas and power companies in the Arabian Gulf Region.

The focus of the programme is on Saudi Arabia and the 18

Lovink Enertech B.V. M&I-Labtech B.V NMi Certin B.V. Onstream European Consultancy B.V. Petrogas Gas Systems B.V. Power Piping International B.V. Quercus Technical Services B.V. Rosscor Holding B.V. Skilledin Stork Technical Services Tebodin B.V. TKF (BV Twentsche Kabelfabriek) TNO Tradinco Instruments Van Leeuwen Pipe and Tube Group

United Arab Emirates. Other countries in the programme include Kuwait, Bahrain, Qatar and Oman.

Under the Dutch Energy Solutions programme several trade missions took place last year; to Saudi Arabia, Abu Dhabi and even to the EPC contractors in London.

Also, there will be a large Holland Pavillion at the ADIPEC exhibition in Abu Dhabi this year.

The oil, gas and power sector will be receiving a lot of Dutch visitors over the next few years for the Dutch suppliers have joined forces. The Netherlands has years of experience in oil and gas extraction and is gradually becoming the gas roundabout of Europe. All of this expertise is an ideal fit for what is needed in the Gulf, namely working with a reliable partner who offers cutting-edge technologies.

The longstanding relation between the Netherlands and Saudi Arabia is apparent considering The Netherlands as one of Europe’s largest investors in the Kingdom. The office of Aramco Overseas is based in the Netherlands since 1953, nowadays in their new office in The Hague. Saudi Arabia is also investing in The Netherlands; examples are the headquarters and production facilities of Sabic Europe, but also the construction of biggest Saudi dredging vessel in The Netherlands.

FME ENERGY GUIDE 2012

13-FME2012 DES-CTH.indd 18

4/16/12 4:20 PM

Cleantech Holland The world is struggling with an enormous climate problem, but the answers are out there. The Dutch technological industry is devising thousands of solutions and has an outstanding reputation worldwide when it comes to energy efficiency and renewable energy. Export organization Cleantech Holland can help you establish contacts with Dutch clean technology companies and experts.

The development of sustainable energy technology is a top priority in the Netherlands. Active partnerships between Dutch industry, government and knowledge institutes have cleared the way for energy innovation.

In addition, the Dutch are investing heavily in energy efficiency. We’ve created partnerships all over the world, and everywhere you go you’ll find Dutch energy concepts and inventions.

Energy from ocean winds The Dutch are particularly strong in offshore wind energy solutions. In 2008, a second Dutch offshore wind farm, Q7, became operational. Located 23 kilometres off the coast of IJmuiden in waters of 19 to 24 metres

deep, the wind farm consists of 60 turbines each with a capacity of two megawatts. It’s the only wind farm in the world that’s situated so far from the coast and in such deep water. The farm’s electricity is transported to the mainland through an undersea cable, and is expected to yield almost 450 GWh per year.

Dutch wind energy expertise is being applied internationally as well. For instance, the Dutch have been asked to assist with India’s endeavour to supply 18,000 villages with renewable energy, particularly via wind turbines.

Cleantech Holland The Netherlands boasts many successful energy innovations. You can get in touch with Dutch clean technology companies and experts via Cleantech Holland. For more information, please contact Cleantech Holland by calling +31 (0)79-3531390, or visit our website at www.cleantechholland.nl Associated with

FME ENERGY GUIDE 2012

13-FME2012 DES-CTH.indd 19

19

4/16/12 4:20 PM

A

A. Hakpark B.V. Steenoven 2-6 4196 HG Tricht PO Box 151 4190 CD Geldermalsen T +31 (0)345 579211 F +31 (0)345 579380 E directie@a-hak.nl W www.a-hak.nl

A. Hakpark offers total solutions for the transport and distribution of oil, gas, water and electricity, for data exchange and telecommunication and for sustainable energy. Both in the Netherlands and abroad the independent companies withint the group are active in the engineering, construction, commissioning, management, inspection, maintenance and abandonment of pipelines and cable networks, above and below ground. The group companies are also capable of drilling, dewatering, and coating pipes, as well as the complete construction and installation of thermal energy storage systems and the manufacturing of appliances, masts and gantries. This broad range of services enables A.Hakpark to deliver turnkey projects.

The A.Hakpark companies have a wide variety of customers that includes oil, gas and water companies, regional and national network operators, energy companies, data communication and telecommunications companies, rail operators, local, regional and national authorities, the chemical and petrochemical industry and waste processors.

A.Hakpark – A world of connections

A. de Jong Group ‘s-Gravelandseweg 390 3125BK Schiedam P.O. Box 5 3100AA Schiedam The Netherlands T +31-104469222 F +31-104154581 E info@dejong.nl W www.dejong.eu

A. de Jong Inc. was established in 1877 and since then has served many clients on numerous engineering and installation projects. We have built a reputation for innovative engineering, sound economics and a thoroughly professional approach to our clients requirements. The soundness of our methods and the quality of our work are evidenced by our many successfully conclud-

you on a current or upcoming project, please feel free to send an email or to

ed projects and repeat assignments from our clients in The Netherlands. We

give us a call.

are a dedicated group of professional engineers and technicians that strive

A. de Jong Installatietechniek b.v. / A. de Jong Installatiebeheer / A. de Jong

for excellence in our work. We employ 180 highly skilled professionals. We

Airconditioning / HRI Installatietechniek b.v./ De Jong Thermal Engineering b.v. /

keep an edge over many firms; primarily due to our dedication to provide our

De Jong Combustion b.v. / R&V Engineering b.v.

staff with the latest technology and best education. Our design teams consist of highly qualified professional engineers and technicians for the specific job at hand. Our teams keep a very active line of communication open with our clients and contractors so as to provide a very thorough and complete job. We have created a website (www.dejong.eu) to provide our current and future clients with information about who we are, what projects we are currently working on and what we have done in the past. Please take a few moments and browse through our website and find out a little more about us. If you have any questions or would like to see if we might be able to help

20 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 20

4/11/12 11:28 AM

A

Aarding Thermal Acoustics B.V. Industrieweg 59 8071 CS Nunspeet PO Box 65 8070 AB Nunspeet T +31 (0) 341 252635 F +31 (0) 341 262112 E info@aarding.com W www.aarding.com

Aarding Thermal Acoustics B.V. established in 1960 is specialised in engineering, contracting and supplying products in the power and petro-chemical market for new and retrofit projects. ATA is an independent company which operates in the business globally. Our headquarters is located in Nunspeet, The Netherlands and we have sales offices in Singapore and uSA. The products of ATA are tailor-made and can be subdivided into the following

ATA products meet the most stringent quality standards. We make certain of

groups:

this by making the quality concept our strategic target at all stages of every project. Our company is certified by Lloyd’s ISO-9001:2008 and quality is the hall-

Gas Turbine Exhaust Systems

mark of all our employees. They are expert, flexible and versatile and qualified to

• Diffusers/Plenum and GT Exhaust Ducts

high levels.

• Single Cycle Exhaust Systems • Bypass Exhaust Systems • Exhaust Stacks • Thermal Insulation • Boiler Internals Acoustical Components • Vent Silencers for Steam and Gas Applications • Flue Gas Silencers • Commissioning Silencers

AEG Power Solutions Weerenweg 29 1161AG Zwanenburg The Netherlands T +31 20 407 78 00 F +31 20 407 78 01 E sales.nl@aegps.com W www.aegps.com

Keep your energy business running!

Full range of reliable AC & DC Power Systems, Solutions and services for Industrial, Energy and Transport applications.

AEG Power Solutions helps customers worldwide meet their power challenges with innovative, world-class power solutions ranging from power conversion modules and high reliability uPS systems to industrial

risk management, business continuity and operational excellence are the key

chargers and DC systems. The latest innovations include power control-

elements of your business. In short, world-class:

lers for high-tech industry applications solar inverters and solutions for

• Front End Engineering & Design (FEED)

new energies. Formerly known as Saft Power Systems or AEG Power Supply

• Detailed Engineering

Systems, the unified its branding worldwide under one single name,

• Logistics and Planning

AEG Power Solutions, to protect your people, your investments and your

• Execution

business – worldwide.

• Service - is our promise to you!

AEG Power Solutions: your partner in each phase of the project

AVAILABILITy SECuRED!

Being an oil company, power company, EPC, project management consultant, specifier, or an engineering and construction services provider, it is your vital interest to talk to a power protection company that is experienced and used to executing large international engineering projects and understands that safety,

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 21

21

4/11/12 11:28 AM

Innovations originate best on the spot

When it comes to bulk gas flow measurement, every mind raises the same question. How can uncertainty be reduced, reliability be improved and maintenance cost minimized? With Turbine and Ultrasonic meters, Elster-Instromet has proven solutions. Together with you we develop innovative concepts. Preferably on the spot. Using our global experience and integrated approach involving a team of various specialists, we can provide a rapid, effective and constructive solution. From the start as a pioneer it has been our ambition to develop innovative solutions that add value. That is why Elster-Instromet is leading the world in metering technology. Wherever you are in this world.

EIM043 advertentie FME Energy Guid 2010.indd 1 p22_elster.indd 1

Elster-Instromet Rijkmakerlaan 9 2910 Essen Belgium Tel. +32 3 670 0700

Elster-Instromet Steinern Strasse 19-21 55252 Mainz-Kastel Germany Tel. +49 6 134 6050 www.elster-instromet.com

18-03-10 15:29 02-04-12 11:21

A

AIBVinçotte VinçotteNederland NederlandB.V. B.V. AIB POBox Box6869 6869 PO 4802HW HWBreda Breda 4802 Takkebijsters88 Takkebijsters 4817BL BLBreda Breda 4817 +31(0) (0)76 76- -571 57122 2288 88 TT+31 +31(0) (0)76 76- -579 579111165 65 FF+31

Vinçotte’s business is focused on quality, innovation and customer satisfaction.

The experience, it has built upon during its innovation more than 135-year-old history, has Vinçotte’s business is focused quality, and customer satisfacenabled the company to develop into a Global Service Provider boasting over tion. The experience, it has built up during its more than 135-year-old history, 130enabled specialistthe ‘Certification’, ‘Testing’ andService ‘Training’ activities seeking to has company to‘Inspection’, develop into a Global Provider boasting enhance safety, quality and the environment in all industrial and service sectors. over 130 specialist ‘Certification’, ‘Inspection’, ‘Testing’ and ‘Training’ activities seeking to enhance safety, quality and the environment in all industrial and service sectors.presence International With over 2,000 employees and offices in 14 countries, we operate in Europe, International presence Asia, Africa and the Middle East. Compelling evidence of our services are the With over 2,000 employees and offices inand 14 countries, we operate in Europe, international accreditations, approvals authorisations bestowed upon

Asia, AfricaWe and Middle evidence our services Vinçotte. arethe active in aEast. wideCompelling range of sectors suchofas energy, theare oil,the gas & international accreditations, approvals and authorisations bestowed (petro)chemical industry, civil & industrial structures, health care andupon public Vinçotte. utilities. We are active in a wide range of sectors such as energy, the oil, gas & (petro)chemical industry, civil & industrial structures, health care and public utilities.

Activities Vincotte has a well-appreciated and internationally recognised reputation for its Activities non-destructive testing (NDT), for its PED inspections as Notified Body and AKI Vincotte has a well-appreciated and internationally recognised reputation for its services (pre-use inspections). The company has the experience and knowledge non-destructive testing (NDT), for its PED inspections as Notified Body and AKI that only comes from years of innovation and development efforts. In a number services (pre-use inspections). The company has the experience and knowledge of fields, such as automated ultrasonic testing, Vinçotte is renowned as one that only comes from years of innovation and development efforts. In a number

ofoffields, suchqualified as automated ultrasonic testing, Vinçotte is renowned one of the most experts worldwide.

Its internationally acceptedasteam ofexperts the most worldwide.

Its internationally accepted team ofas arequalified involved experts in countless top-priority projects in various areas, such experts are involved in countless in pipelines, various areas, such as conventional and nuclear powertop-priority plants, LNG projects terminals, on off-shoreconventional and nuclear power platforms and construction sites.plants, LNG terminals, pipelines, on off-shore-

platforms construction sites.

Vinçotte’sand proficiency has led to the fact that it was chosen as a partner in the Vinçotte’s led project. to the fact thatisitresponsible was chosen a partner prestigiousproficiency ITER nuclearhas fusion Vinçotte foras checking the in the prestigious ITER nuclear fusion project. Vinçotte is responsible design of the reactor vessel and the supervision of its construction. for checking the design of the reactor vessel and the supervision of its construction.

More information Call upon the services of Vinçotte to be sure you are working with an More information organisation that provides flexible and impartial services and multinational Call upon the services of Vinçotte to be sure you are working with an knowledge. For more information www.vincotte.com organisation that provides flexible and impartial services and multinational knowledge. For more information www.vincotte.com

Anamet Europe Transformatorweg 30 1014 AK Amsterdam Netherlands T +31 (0)20 5863586 F +31 (0)20 6881126 E info@anamet.nl W www.anamet.nl

Anamet Europe BV: Quality, Service & Partnership - The Pillars of Our Philosophy 65 years on, Anamet Europe’s philosophy continues to revolve around providing our customers with innovative products and excellent service. Today, our product range includes conduits, metal hoses, fittings and ancillary products available in a wide range of materials and specifications to meet practically every feasible

1. Anaconda flexible conduits and fittings: a solution close at hand

application, whether electrical or industrial. By developing mutually beneficial

Sealtite, Multiflex, Multitite: Wide selection of mechanically strong metal flexible

relationships with our customers, Anamet Europe is in a unique position to

conduits.

not only understand the nature of our customers business, but also to work

Available in a wide range of executions, Sealtite and Multitite are flexible

with them to develop tailor-made solutions for their particular application

metal conduits with cover, Multiflex are conduits without cover. Whether you

requirement. Partnership, quality and service are the pillars on which our

require square locked or fully interlocked, galvanized steel, stainless steel,

philosophy and success are built.

bronze or aluminum, braided or unbraided, Anamet has a product to meet your requirements. With each type of conduit, there is a matching range of fittings including straight or elbow design, nickel-plated brass or stainless steel in ISO, PG or NPT.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 23

23

4/18/12 2:12 PM

A

Applus RTD Delftweg 144 3046NC ROTTERDAM PO Box 10065 3004AB ROTTERDAM T +31 (0)10 716 60 00 F +31 (0)10 716 62 06 E info@applusrtd.com E sales.benelux@applusrtd.com W www.ApplusRTD.com

75 years

Applus RTD is the global reference in NDT, inspection and advice. We are focused on providing total solutions to ensure the integrity of your asset. This has been our business ever since 1937. Furthermore, we have an independent certification company to our disposal which is appointed as AKI-company and provides a broad scale of Notified Body and other certification services. This complete package of standard and tailor-made Asset Integrity Services, ensure the integrity and the compliance of your assets.

Scope For 75 years now, we are the specialist in Non-destructive testing. Our scope of work ranges from girth weld inspection with radiography or ultrasonic testing, to leak and corrosion detection, using high standards and state-of-the-art equipment. But not only do we specialize in NDT; Our services cover every aspect of Testing, Inspection and Certification (TIC), for either new construction or in service; we strive to provide valuable insight that will directly have a positive impact on your downtime.

Atlas Copco Compressors Nederland Merwedeweg 7 3336 LG Zwijndrecht PO Box 200 3330 AE Zwijndrecht T +31 (0) 78 - 6230230 F +31 (0)78 - 6100670 E info@nl.atlascopco.com W www.atlascopco.nl

Atlas Copco is the world’s largest manufacturer of air compressors. In addition to our broad range of rotary screw compressors and centrifugal compressors we also supply air dryers, air filtration equipment, aftercoolers, automatic control systems, industrial heat recovery systems and generators. Atlas Copco expertises in custom-engineered gas and air compressors as well as expansion turbines, primarily for process industries. Reliable compressor operation is vital

Products: lubricated and oilfree stationary and portable compressors, oilfree

for a smoothly running production. Food, pharmaceuticals and the electronic

blowers, piston, screw and turbo. Modulair compressed air systems contain-

industry benefit from Atlas Copco’s clean, oilfree air which ensures high quality

erized, electric or diesel driven. Airdryers, aircoolers, generators, engineered

in sensitive and valuable products. The energy efficient operation of Atlas Copco

turnkey projects.

compressors supports productivity of process industries. With advanced optimizing and controlling features Atlas Copco offers longlasting efficiency and substantial energy saving solutions. Worldwide Atlas Copco is represented in more than 160 countries, ensuring availability of supply, sales, rental and service.

Our service organization operates on a 24/7 bases. Atlas Copco has been able to anticipate and meet increasingly stringent customer requirements and captured the leading position on the world market.

24 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 24

4/11/12 11:28 AM

Bayards Aluminium Constructies

sustainable supplier

B

Veerweg 2 2957 CP Nieuw-Lekkerland PO Box 9 2957 ZG Nieuw-Lekkerland T +31 (0) 184 68 30 00 F +31 (0) 184 68 43 45 E sales@bayards.nl W www.bayards.nl

Bayards Aluminium Construction BV is one of the world’s leading companies in engineering, design, fabrication and installation of complex aluminium structures for the offshore and shipbuilding industry. Bayards is an industry leader

• Link Bridges

when it comes to developing structures and products with substantial weight

• Service Platforms/Walkways

reduction and which require very little maintenance. As aptly noted in the com-

• Offshore Rig Ramps and Walkways, including

pany logo, Bayards offers Solutions in Aluminium.

All construction includes design and engineering, procurement, prefabrication,

Bayards ‘ focus on the Offshore Industry characterizes her as a full service con-

transport, installation and commissioning on site.

tractor on a turnkey EPC contract basis. Bayards can offer you an ‘all inclusive’

Solutions in aluminium from Bayards are always custom-made, engineered with

package for every location including:

profiles of their own development, and built in accordance with the latest international safety regulations and highest quality standards.

• Complete Turn Key Helidecks

In addition to offshore and shipping, Bayards offers aluminium solutions to

• Helideck Assembly Kits

other market segments such as yacht-building, defence, high tech, tanks and

• Helidecks complete with: Aluminium Support Structures, Heat Tracing for Helideck

vessels, transport equipment, and civil engineering.

Winterisation, Aluminium Access System, Firefighting Equipment (including DIFFS),

Bayards is certified according to ISO 9001:2008 and AQAP2120-2 and is fully able

and Helideck Lighting

to meet all international offshore standards.

Bayards Safedeck - a helideck with enhanced, passive fire-suppressing performance

Thanks to 50 years of experience providing high-quality aluminium construc-

• Helicopter Hangars

tion, Bayards has an extensive list of references from all over the world, available

• Stair Towers

upon request.

• Living Quarter units

Please visit our website www.BAyARDS.nl and please contact us with any questions.

Machinefabriek Boessenkool BV Turfkade 13 7602 PA Almelo, The Netherlands T +31 (0)546-488800 F +31 (0)546-488801 E info@boessenkool.com W www.boessenkool.com

Proactive for prodigious engineering in off-shore and energy It can be a special machine with special demands and wishes. But it can also be work of abnormal proportion, in categories such as new building, upgrading or revision. Our power is to supply special tasks of top technique.

Company culture For the work we do, we have to be constantly in top shape. That’s why we created

• Precision welding, also in Aluminium and Stainless.

a practical approach, in which three elementary parts play the lead, craftsman-

• Special machines building, upto 40 meters; a 5500 m2 production facility with

ship, supply good solutions and a cooperative mentality of a pure co-maker.

20 meter height and 120 ton hoisting capacity

Together these elements give a superior quality signature to our work.

Certifications

Capacities

Qualified by several Notified Bodies to re-stamp official stamped quality steel (3.2 cert.).

• CNC Boring spindle 130 mm,

Quality assurance ISO 9001:2008 (gold award).

work-area : 2.500 x 3.500 mm.

• CNC milling (4-axis) table 10.000 x 1.000 mm, till 60 ton (weight), work-area : 8.300 x 2.500 x 1.250 mm.

Workshop Approval by RINA, DNV, ABS, Bureau Veritas and Lloyds.

Welding certification according to AWS D1.1, ASME IX, NEN EN 287-1 for various welding process and various material combinations

• CNC vertical turning : Ø 5.000 x 4.000 mm, till 60 ton.

Machinefabriek Boessenkool is part of the Osse Equipment Manufacturing

• CNC turning : Ø 980 x 5.000 mm.

Group (www.oem-group.com)

• Grinding.

The group has capacity of: 150.000 man/machine hours a year; 9 large CNC

• Assembly.

vertical lathes; 12 large CNC boring/milling machines; 5 large horizontal lathes;

• Powder-coating.

5 large drilling machines.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 25

25

4/11/12 11:28 AM

Böhler Lastechniek Groep Nederland BV

B

Haarlemmerstraatweg 89 1165 MK HALFWEG (NH) T +31 (0) 20 448 66 22 F +31 (0) 20 448 66 44 E info@bwgnl.nl W www.bohlerwedinggroup.nl

Böhler Welding Group A complete range of welding fillers ranging from low-to-high alloyed materials including sophisticated alloys. Our expertise in the field of high temperatue and creep resistant applications is based on many years of experience and extensive research into creep rupture behaviour under long period stressing under varied conditions. For constructions this experience guarantees fabricator, surveryor and owner company a high degree of safety. Our products are synonymous with

Experience in applications

quality on the market. We traditionally develop and test our products in close

In oil, gas, petrochemical and power applications we are leading in application

cooperations with our customers, renowed materials institutes and base mate-

experience. Our list of references is impressive in pressure in vessel building, apply-

rial manufactures. Products are marketed under various brand names but all

ing corrosion resistant layers by strip cladding, piping constructions in P1 up to P92

carry the guarantee stamp of our group.

and higher temperature resistant base materials, pipeline constructions on- and offshore, offshore constructions needing our duplex - super duplex and titanium alloys etc. We are unique in this field and generally considered as proven best partner for welding applications, everywhere in the world - also in The Netherlands.

Breman Machinery Sasdijk 20 8281 BM Genemuiden PO Box 135 8280 AC Genemuiden T +31 (0)38 3855373 E info@breman-machinery.nl W www.breman-machinery.nl

Breman Machinery makes components for builders of machinery, engineering bureaus and industrial end users, such as; offshore companies, the military, aerospace companies and other industrial firms.

From simple structures to complex mechanical components.

• assembly and fitting Work-pieces of high precision, often with extreme dimensions and weights.

• corrosion protection

Work-pieces that weigh tens or even hundreds of tonnes and are made to

Breman Machinery uses their unique machine capacity for their own projects

a precision of a hundredth of a millimeter. Samples of workmanship.

and to supply specific components to third parties. What they aim for is customdesigned solutions.

What’s unique about Breman Machinery is that they are able to produce these components and structures entirely in house.

ISO9001, ISO3834 and VCA-certified.

Extreme precision!

They have the people, machines and facilities under their own roof.

• all machining and non-machining processing of (heavy) materials • welding and structures

26 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 26

4/11/12 11:29 AM

Bronswerk Heat Transfer

B

Stationsweg 22 3862 CG Nijkerk PO Box nr 92 3860 AB Nijkerk T +31 (0) 33 2472500 F +31 (0) 33 2452338 E info@bronswerk.nl W www.bronswerk.nl

Bronswerk Heat Transfer (BHT) was established seventy years ago. In this period, we generated a large amount of experience and knowledge in heat exchange solutions in the following markets: Power, Gas, Oil, Chemical and Air Handling.

We highly value delivering a good product and excellent service. We see it as a

BHT specializes in sales, design, engineering and final assembly. All non-spe-

challenge to offer the best technical and logistical solution for every possible

cialized side-steps are subcontracted. Since these subcontracting activities are

question in the area of heat exchange and process design.

always taking place through qualified partnerships, the quality is guaranteed.

We aim to expand these partnerships in the future to further expand our pos-

Our engineering department consists of an enthusiastic team with well-

sibilities as a whole.

trained and highly qualified professionals. The engineers from BHT actively work together with the client to come up with the best solutions. They are not afraid to think out of the box and will find creative solutions if the job requires to do so.

The organization of BHT values its transparency. We work in project teams so that the client deals with just one projectmanager. Since this person holds responsibility, this system makes communication clearer.

Brooks Instrument BV

sustainable supplier

Neonstraat 3 6718 WX Ede PO Box 428 6710 BK Ede The Netherlands T +31-318 549 300 F +31-318 549 309 E brookseu@BrooksInstrument.com W www.brooksinstrument.com

About Brooks Instrument Brooks Instrument is a company of highly trained specialists with production locations in all world areas whose goal is to provide flow solutions that exceed customer expectations. The European headquarter is based in The Netherlands.

Brooks provides the broadest array of flow products and systems in industries Product Portfolio

as bio pharmaceuticals, oil & gas, fuel cell, solar, chemicals, medical devices,

Brooks Instrument’s portfolio for Oil & Gas industries includes metal and

analytical instrumentation and semiconductors.

glass tube variable area flow meters (rota), magnetic level gauges, level and flow switches, thermal mass flow meters and a variety of flow accessories.

Service and Support

The strength of Brooks Instrument is the ability to produce flow meters for

Brooks Instrument provides a service network via representatives and distribu-

extreme conditions such as low- and high temp, aggressive fluids and high

tors in almost every country. The nearest service point is easily traceable on our

pressures up to 20.000 PSI on wellhead applications and fluid injection. Serving

website. Brooks Instrument is certified to ISO 9001:2000.

EPC companies all over the world for more than 60 years we have built a lot of experience with projects, project documentation and test requirements.

www.BrooksInstrument.com

Our products are provided with international approvals for safe use and are exported to many different countries even where industrial laws require local approvals.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 27

27

4/11/12 11:29 AM

Cegelec B.V.

C

Laan van Europa 450 3317DB Dordrecht PO Box 8206 3301CE Dordrecht T +31-787508200 F +31-787508282 E info.nl@cegelec.com W www.cegelec.nl

In The Netherlands Cegelec was established in 1966 and has built a historical ability in their field. Technology is the lasting basis for everything we do.

Cegelec is an international technological service group, providing integrated and multidisciplinary solutions, which are innovative, sustainable and add value to the processes of our customers (companies, public and local authorities). Cegelec is active on the complete service cycle to the client, from design

Cegelec helps its clients to make their business successful. That’s our way

to installation and maintenance, working with its own specialized teams.

for growth.

In The Netherlands Cegelec is responsible for the engineering, procurement and construction of the electrical, instrumentation, control & command and air conditioning systems.

The basis of a good partnership in projects is to listen to the customer and to earn trust, certainly when it concerns a high level of system integration, projects which involve intensive cooperation between different disciplines or when it concerns the responsibility as a general contractor. It is a great advantage to be able to rely on the know-how and international experience of an European industrial group as Cegelec.

Cirmac International bv W www.cirmac.com

An innovative mind behind gas treatment technology. That is Cirmac International bv. Operating worldwide, specializing gas treatment systems for 30 years.

Specialist and one of the leading suppliers of customized nitrogen generation packages for the on- and offshore oil & gas, (petro)chemical industry, refineries

All systems are built in accordance with International codes and standards.

and other industries. Her flexibility and innovative character guaranties a variety of solutions to fulfill customer needs on every level. Technically the systems are

Range of supply:

based on molecular sieves, zeolites, activated carbon and membranes.

- Nitrogen production systems: With more than 20 years of practical experience in biogas upgrading Cirmac provides three well-known techniques.

PSA and membranes - Biogas gas purification systems with 3 techniques:

Customized design, turn-key delivery, erection and service for the most effective

* LPCooabÂŽ (Low Pressure CO2 adsorption)

and efficient gas treatment systems.

* Membrane separation * VPSA (Vacuum Pressure Swing adsorption) - Gas-/Air dryers: TSA and PSA

sustainable supplier

28 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 28

4/11/12 11:29 AM

Cofely Nederland N.V.

sustainable supplier

Kosterijland 20 3981 AJ BuNNIK Nederland PO Box 210 3980 CE BuNNIK T +31 306569400 F +31 306572018 E info@cofely-gdfsuez.nl W www.cofely-gdfsuez.nl

C D

To contribute to a better world through sustainable technology Cofely has extensive knowledge, experience and passion for technology. This enables us to deliver sustainable customer solutions in the areas of Energy Efficiency, Asset Efficiency and Human Comfort. By getting the most of resources, Cofely ensures comfortable and energy efficient working and living conditions, and the optimisation of technical installations and production processes.

Cofely is part of GDF SuEZ Energy Services, the European leader in multi-technical services, with revenues of 14 billion euros in 2008 and 77,000 employees.

GDF SuEZ Energy Services is a business branche of GDF SuEZ, one of the foremost energy companies in the world

D&C Engineering Postbus 1 29500 AA Alblasserdam Nieuwland Parc 301-302 2952 DD Alblasserdam T +31 (0) 78 - 691 9222 E info@dcengineering.nl W www.dcengineering.nl

D&C engineering: a knowledge/know-how centre in the markets Overhead High Voltage Lines and Storage Tanks For an outsider these two disciplines seem to have almost no synergy. However, knowledge en know-how are the binding elements. In-depth knowledge of design aspects, testing, operations and use, inspection and maintenance of

The ‘Storage Tank department’ works internationally in the field of storage tanks

these capital structures is a must for all personnel of D&C engineering. Norms,

for petro-chemical products in gas- or liquid phases. By being chairman of the

codes and guidelines are indispensable in both fields of activity, but these docu-

organization EEMuA and of CEN/BSI committee, D&C engineering is heavily

ments can only be written if knowledge of all processes involved is available. The

involved in the making of norms, codes and guidelines for governmental author-

‘General Steel department’ is market leader in The Netherlands in the field of

ities, the oil industry and depot/terminal owners. D&C engineering advises it

designing and constructing Overhead High Voltage Lines and Switch Stations.

clients with design, inspection and maintenance routines and assists the stor-

By being member of norm committees (CEN en Cigré) and by organizing courses

age tank owners to prevent any calamities which can occur during transfer and

D&C engineering’s knowledge is available for its clients.

storage activities of dangerous cargo like petro-chemical products.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 29

29

4/11/12 11:29 AM

Discom B.V. Staalindustrieweg 5 2952AT Alblasserdam T +31-786810960 F +31-786810970 E info@discom.eu W www.discom.eu

D The Discom Effect Exhaust systems are having to meet increasingly strict demands. Noise-limiting measures are being tightened. What is more, governments are setting new standards for the emission of contaminating gases. Discom’s specialist knowledge as regards the integration of different techniques and technologies is invaluable to anyone who wants to reuse heat from exhaust gases. Our focus on innovation enables us to meet the demands of today and tomorrow and to add value to any assignment, no matter what the size. The added value of the Discom Effect.

Specialists in the energy market Discom is a specialist in all aspects of exhaust systems and the energy market is one of our key fields of work. We develop custom-made systems for power plants, temporary and emergency power systems and combined heat and power installations. It may be that a power plant with a capacity of many megawatts has to fulfil a complex package of requirements and standards, or that you are looking for an efficient solution for a mobile generator set. In both cases, Discom can advise and produce in a custom-made fashion, taking account of specific circumstances and special standards. The solution can range from a simple maximum efficiency silencer to a complete exhaust system, from motor to flue.

Doedijns International Coenecoop 103-105 2741 PH Waddinxveen P.O. Box 179 2740 AD Waddinxveen T + 31 (0)182-302888 F + 31 (0)182-302777 E info@doedijns.com W www. doedijns.com

Engineering your ambitions Dutch based and founded over 100 years ago, Doedijns today is expanding with subsidiaries around the globe.

Doedijns holds a strong position in custom made components and in turn key solutions for end users in the fields of hydraulic, pneumatic, instrumentation & control systems. Our multi disciplined team ensures the success of your project by maintaining overall control: from initial design & engineering all the way through to specification, manufacturing and commissioning (world wide, 24/7).

Our ongoing innovations, such as compact actuators, temperature measurement novelties, complex power systems, aviation refuelling systems and high end sampling and filtration solutions help our clients better control their business: whether it is for up/down stream, on/off shore, transportation or refining.

Quality, health and safety Doedijns is ISO9001:2000 and VCA** certified and FPAL registered. Our calibration laboratory is ISO17025 certified, while our products can also be supplied with ATEX and PED certification.

30 FME ENErgy guIDE 2012-2013

19-FME2012 profielen.indd 30

4/18/12 11:27 AM

Duiker Mechanical B.V. Chroomstraat 144 2718 RH Zoetermeer PO Box 27 2700 AA Zoetermeer The Netherlands T +31 (0)79-3601130 F +31 (0)79-3611181 1 W www.duikerme.nl

D E

Duiker Mechanical is supplier to machine builders, oil and gas industry, offshore industry, chemical industry, aviation, engineering companys and the maritime industry.

Duiker Mechanical specialises in customised small to medium sized series of products where hig standards for quality, measurements and deliverability are key- factors Duiker Mechanical is ISO-9001: 2008 certified and delivers according to several standards as set by Lloyds , DNV, BV, ABS en GL.

Eaton Industries (Netherlands) B.V.

sustainable supplier

P.O. Box 23 7550 AA Hengelo, The Netherlands T +31-742466888 E secretariaatservice@eaton.com W www.eaton.eu/electrical Eaton Hydraulics P.O. Box 120 7475 AC Goor, The Netherlands T +31-547388314 E info.hydrowa@eaton.com W www.eaton.com/hydraulics

Eaton Corporation is active in both the electrical sector and the industrial

Hydraulics business

sector.

Eaton Hydraulics offers a full portfolio of fluid conveyance and power & motion control products for hydraulic applications. It has a number of family brands

Electrical business

with world class reputation like Eaton, Vickers, Char-Lynn, Aeroquip, Walterscheid,

Eaton’s Electrical Solutions & Service (ESS) Business unit in Hengelo is respon-

Gromelle / Hansen Hydrowa, Hydro-Line, Indunorm, Integrated Hydraulics,

sible for the execution of complex projects within the European Operations of

Synflex, ultronics and more.

Eaton’s Electrical Group. Market segments covered by ESS are: Petrochemical Industries, Energy Distribution, Healthcare, Commercial Buildings/Light

Contact:

Commercial Applications.

Eaton Electrical: Bert Droppers, Director Marketing & Services Eaton Hydraulics: Ruud Pullen. Sales Executive Oil & Gas, Marine

The ESS team offers a comprehensive portfolio of support, tailored for every stage of a power system’s life cycle. Through our design, build and support services, we are dedicated to understanding your challenges and ensuring that your entire electrical infrastructure functions at its highest level.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 31

31

4/11/12 11:29 AM

ELEQ Tukseweg 130 8331 LH Steenwijk PO Box 12 The Netherlands T +31 (0) 521 533333 F +31 (0) 521 533391 E info@eleq.com W www.eleq.com

E ELEQ Mastering Electricity ELEQ is an international company which plays a leading role in electrical energy management technology for more than 60 years. Optimum control through metering and connecting – from source to outlet – making ELEQ a trusted and versatile partner for the electrical energy sector.

ELEQ supplies a wide and varied range of international clients. ELEQ produces a broad assortment of current transformers, transducers, measuring instruments and light-mast junction boxes for industry, the transport and distribution of energy, the shipping sector, and public lighting. Standard and customised products alike. Solidly and durably built in keeping with our customers’ requirements. These properties have given the brand name ELEQ international renown.

With some 250 employees divided over the locations in Steenwijk (NL), Kerpen (D) and Kenitra (MA), ELEQ occupies a leading market position. ELEQ provides a challenging working environment where German “Gründlichkeit” goes hand-inhand with Dutch entrepreneurial spirit.

Elster-Instromet Rijkmakerlaan 9 2910 Essen Belgium T +32-36700700 E sales@elster-instromet.com W www.elster-instromet.com

Elster-Instromet, leading the world in metering technology.

Elster Group is a world leader in Advanced Metering Infrastructure (AMI) and integrated metering and utilization solutions to the gas, electricity and water industries. Elster’s high quality AMI and AMR products, systems, and solutions reflect the wealth of knowledge and experience gained from over 170 years of dedication to measuring precious resources and energy.

Custody transfer measurement systems for up- and midstream natural gas and LNG are provided by Elster-Instromet’s Integrated Metering Solution divi-

Elster provides world class solutions and advanced technologies to help utilities

sion; Engineered solutions that provides you peace of mind and improve your

more easily, efficiently and reliably obtain and use advanced metering intel-

bottomline.

ligence to improve customer service and enhance operational efficiency. Elster’s AMI solutions enable utilities to cost-effectively generate, deliver, manage and conserve the life-essential resources of gas, electricity and water.

The group has over 7,500 staff and operations in 38 countries, focused in North and South America, Europe, and Asia. For additional information visit our website www.elster.com

32 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 32

4/11/12 11:29 AM

Escher Process Modules B.V. Noordhoek 37 3351 LD Papendrecht The Netherlands T +31 78 644 8250 F +31 78 644 8251 E info@escher.nl W www.escher.nl

E

ESCHER Process Modules is a global Process Technology House, founded in 1925 in The Netherlands, that serves the Oil & Gas process plant industry worldwide, both

F

onshore and offshore. Our mission is to provide Excellence in Process Technology.

ESCHER has built a worldwide reputation as designer, engineer, PMC, fabricator and supplier of the following process systems.

Process modules and skid-mounted packages for Oil & Gas treatment: • Gas dehydration and glycol regeneration systems (TEG)

After sales services:

• Gas or liquid dehydration systems using molecular sieve or silica gel adsorbents

• Spare parts

• Low temperature separation systems (MEG / DEG regeneration)

• Project services

• Separator skids (2 & 3 phase)

• Commissioning and start-up assistance

• Fuel gas systems

Delivery of solutions that meet our stakeholders’ expectations, offer our employ-

• Metering skids

ees challenging opportunities to develop and grow, integrate safety, quality and

• CO2 Dehydration

sustainability and on-time delivery with our culture and performance confirms

Flare systems:

ESCHER’s search for Excellence in Process Technology solutions since 1925.

• Retractable multi stack flares • Flare stacks (self supporting, guyed, retractable)

Contact: After sales: E. Verdonk

• Flare tips (VFH®, steam injection, sonic, multi stage, air assist)

Flare systems: R. de Jong

• Smokeless flaring

General: V. Rüter

• Ignition systems and pilot burner

VCA** and ISO-9001:2008 certified

• Auxiliary equipment

FPAL supplier ID 10042054

FIB Industries BV Einsteinweg 18 8912 AP Leeuwarden Postbus 314 8901 BC Leeuwarden T +31-058 2945 945 F +31-058 2125 742 E info@fib.nl W www.fib.nl

We are a fabricator of pressure- and process containing equipment constructed from stainless and nickel alloy materials and which usually form a critical part of a process installation.

Typical equipment include: - Reactor Internals (for hydro-processing technology)

Our design and construction is carried out in accordance with the most

- Column Internals

common international codes, such as PED, ASME VIII, AD-2000, PD 5500, RToD

- Industrial Burners (Gasification and LowNox)

(Stoomwezen), CODAP, API 620, API 650 and BS 2654, KIWA and GB-160 (China).

- Oxygen Mixing Nozzles

We are certified to ISO 9001:2000 (general), ASME u/R-Stamp, HP-0 (TuV), SQL

- Plate packs

(China Manufacturers License) and we are authorized to issue CE certification.

- Flare tips - Columns (fully dressed, including internals) - Scrubbers - Heat Exchangers Our customers are OEM’s, EPC Contractors and Plant Owners and we deliver our products on a global basis. Major market segment is in downstream processing (chemical and oil and gas).

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 33

33

4/11/12 11:29 AM

DO YOU KNOW THE CRITICAL PARTS OF YOUR PLANT?

SGS BRINGS ADVANCED INSPECTION TECHNOLOGY TO YOUR DOORSTEP

Whether it is in fabrication, pipe manufactering, pipeline, plant construction, chemical, petrochemical plants, shipyards or offshore industry, in conventional and nuclear power plants - our non-destructive testing (NDT) services provide quality assurance and process safety. SGS has a world wide track record with proven performance on new constructions, pipeline installation, in-service inspection and expansion projects as the total NDT solution provider. SGS’ scope of services covers both, conventional and advanced NDT systems, provided by qualified inspectors to international standards.

SGS IS THE WORLD”S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY. WITH MORE THAN 70’000 EMPLOYEES, SGS OPERATES A NETWORK OF OVER 1’350 OFFICES AND LABORATORIES AROUND THE WORLD

SGS Nederland B.V. Malledijk 18 3208 LA Spijkenisse t +31 (181) 69 3630 e nl.ndt.sales@sgs.com w www.nl.sgs.com/industrial

p34_sgs.indd 1

02-04-12 11:21

GEA Westfalia Separator Nederland BV

sustainable supplier

Hoogveld 16 5431 NW Cuijk (NL) PO Box 375 5430 AJ Cuijk (NL) T +31-485319300 F +31-485319301 E wsnetherlands.info@geagroup.com W www.westfalia-separator.nl

GEA Westfalia Separator in Energy, Oil and Gas GEA Westfalia Separator is one of the world leaders in centrifugal separation technology. With offices in more than 50 countries they are a big player in the

G

market. GEA Westfalia Separator centrifuges and decanters ensure adequate liquid-liquid and liquid-solids mixtures separation, making use of differences in density and high G-forces (up to 10.000 G). Due to this we are able to clarify and

Most common applications in the Energy- and Oil & Gas market:

purify all kind of liquids with high efficiency. Our engineers specialize in design of standalone machines, or complete turnkey systems, tailored to meet each cus-

- (Bio) fuel treatment (GO/MDO/HFO)

tomer’s individual requirements.

- Lube oil treatment - Crude oil/produced water treatment

Centrifugal technology is a reliable and innovative technology used on Platforms

- Bilgewater treatment

and FPSO’s to treat crude oil and produced water in the second stage, but

- Slop oil treatment

also protect your valuable power supply equipment as diesel engines and gas

- MEG treatment

turbines by cleaning the fuel- and lube-oil according to the manufacturer’s

- Oily water treatment

requirements.

- Sludge treatment - Drilling mud treatment

Geha b.v.

Veilingstraat 52 7833 HN Nieuw-Amsterdam PO Box 29 7833 HN Nieuw-Amsterdam T +31 (0) 591 307050 F +31 (0) 591 553781 E info@geha-holland.nl W www.geha-holland.nl

Geha b.v. is an independent manufacturer of machinery and equipment, focused on components for air-cooled heat exchangers and condensers. Our 50 employees’ activities include design, development, engineering, production and assembly of equipment to suit your special needs.

The company

Our philosophy: Our business is built on supplying what our customers rightly

We are a family-owned company, founded in 1957, located in the Northeast

expect: solid engineering advice, quality production / products and on-time

of the Netherlands. Our production facilities include 3,500 m2 under roof

execution of projects. To this end we encourage our employees to remain updat-

plus 6.300 m2 for assembly and testing of coolers. We engineer-to-order in

ed in their individual field of expertise. ISO-, SCC-, and SLV-certification assure

3-D modelling for a wide variety of climates, from dry desert to offshore and

that our processes and our tooling are fit-for-purpose.

sub-arctic.

Please refer to our ad in this publication for more information about our product range.

Our markets Typically, our customers are manufacturers of fin pipe bundles, mainly located in Western Europe. Through them our products find application on gas- and oilrigs, and in petro-chemical installations throughout the world.

FME ENErGy GuIDE 2012-2013

19-FME2012 profielen.indd 35

35

4/18/12 11:27 AM

Your asset inte g is our core acti v

Stork Technical Services is a world class, knowledge-based asset integrity management company dedicated to providing seamless performance to corporations in the Oil & Gas, Power, Chemical and other major industries.

The outcome? Reduced risk. Improved environmental performance. Unconditional safety. Operational excellence that ensures our customers uninterrupted production at any site in the world.

We think and do on behalf of our clients by harnessing over 185 years of customer service and the collective talents of thousands of global professionals to optimize assets from start to finish.

If you are interested in start-to-finish asset optimization services performed by highly dedicated people who want nothing more than to partner with you to meet or exceed your needs, then get to know Stork Technical Services.

FME-advert-2012.indd 2 p36_37_stork.indd 2

6/03/2012 15:32:24 02-04-12 11:21

FME-ad

e grity i vity

:32:24

Reliability Safety Safe Sa fety ty Availability Av ailability 24/7 24/7

www.storktechnicalservices.com

FME-advert-2012.indd 3 p36_37_stork.indd 3

Thinking and Doing 6/03/2012 15:32:46 02-04-12 11:21

Global Gas Network Initiative Concourslaan 17 9727 KC Groningen PO BOX 19 9700 MA Groningen The Netherlands T +31 (0)505 213 000 E info@ggni.nl W www.ggni.nl

Global Gas Network Initiative is a network of independent Senior Gas Experts with the ambition to help governments, authorities and companies to use natu-

G

ral gas as the fuel of choice. We can help you with questions about gas exploration & production, gas transportation, storage and distribution.

The GGNI Senior Experts will gladly support you in using natural gas in an economical and sustainable way.

Our services: Coaching

Our Senior Experts with many years of experience in the sector are excellent coaches for you and your staff.

Workshops

Interactive workshops in which we will discuss your gas business, using the Dutch gas infrastructure as a reference model.

Audit & Advice Our experts can audit your solutions and help you optimize your gas infrastructure, both on a strategic and operational level. They offer advice, practical assistance from well to burner.

Proven expertise: independent and committed.

Gispen International BV Parallelweg West 23 4104 AZ Culemborg Postbus 30 4100 AA Culemborg T +31 345 474211 F +31 345 4743 E info@gispen.nl W www.gispen.com

Gispen creates the best environments imaginable where people work, learn and are cared for. In everything we design and produce, we wish to make a positive contribution to the environment.

Our mission statement ‘A Better Life at Work’ is anchored in our core values: sustainability, innovation and design with which the company has distinguished itself since 1916.

Gispen is the second-largest office furnisher and designer in the Netherlands with six sales offices in the Benelux and production facilities in The Netherlands

In the mid 90’s Gispen already put the environment at the top of its invest-

and China.

ment plan. The fact that Gispen was the second company in the sector to have received the EMAS (Eco Management and Audit Scheme) certificate is the result of its long term innovative policy. ‘We are convinced that striving to achieve sustainability through social engagement is a continuous process’, says Peter Veer, general manager of Gispen.

As of 1 July 2010 Gispen has become climate neutral in all its business activities.

Which means that we constantly investigate where energy savings can be made in the organisation. Furthermore, any residual emissions that cannot be reduced will be compensated through a climate project.

38 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 38

4/11/12 11:29 AM

Glynwed B.V. Steenpad 5 4797SG Willemstad PO Box 53 4797ZH Willemstad T +31-168473651 F +31-168473200 E info@glynwed.nl W www.glynwed.nl

Glynwed B.V. is responsible for consulting, sales and service activities of Rheinh端tte pumps which are used in the chemical, petrochemical, environmental and steel industries.

G

As a specialist in corrosion and wear resistant materials, since 1857 Rheinh端tte lead the field in know-how in many specific areas, and have a world-wide repu-

We dispose of a strong (brand independent) service department which offer

tation in the handling of sulphur and sulphuric acid applications.

custom made solutions for the maintenance of pumps and valves, available 24 hours a day, 7 days a week.

The basis for our comprehensive pump range are the three material groups: Metal, Plastics and Ceramics. Thanks to this wide variety of materials and more

Our strength is supplying custom-made solutions, based on the specific require-

than 40 different pump ranges we are able to offer solutions specific to the

ments from our clients.

process and the medium.

Gouda Holland BV P.O. Box 8 2851 AW Haastrecht, The Netherlands T +31 (0)182 506200 F +31 (0)182 506209 E info@goudaholland.com W www.goudaholland.com

FPO

Gouda Holland Gouda Holland is a manufacturer of cable management systems for both industrial as well as commercial use. Years of experience and effective reactions to the ever changing demands of this industry have led to a wide range of readily available industrial cable duct systems each suitable for its own specific area of application. Gouda Holland cable ducts are applied in the widest variety of industries, such as the chemical and petrochemical industries, offshore activities, energy, telecommunications and dairy and food industry.

Wide span cable ladder Marine ladder

Gouda Holland is able to provide solutions for specific requirements, especially because the company produces its own standard range of cable ducts in stainless

Material types:

steel, hot dip galvanized steel an aluminum. The Crafty, Crafty MF and Lock sys-

Stainless steel AISI 304 BS 304 / WL Standard 1.4301

tems are particularly popular due to their high span capacity. Other systems also

Stainless steel AISI 316 BS 316 / WL Standard 1.4404

regularly used in (petro-) chemical industry are Resist, Tray and Marine Ladder.

Mill Galvanised steel EN 10142 Mill Galvanised steel EN 10142 and coated

Gouda Holland is VCA-P and ISO-9001-2008 certified.

Hot Dip Galvanised steel NEN-EN-ISO 1461 Aluminum EN-AW-1050A

Product range: Cable tray

Contact:

Trunking

Remko Boot, Director

Cable ladder

Akram Achikhi, Manager Sales

FME ENERGY GuIDE 2012-2013

19-FME2012 profielen.indd 39

39

4/18/12 11:28 AM

GustoMSC

sustainable supplier

Karel Doormanweg 66 3115JD Schiedam P.O. box 687 3100AR Schiedam T: +31-102320800 F: +31-102320801 E: marketing@GustoMSC.com W: http://www.GustoMSC.com

GustoMSC is a leading design and engineering company for all types of mobile offshore units: jack-ups, semi-submersibles and offshore vessels. Our business

G H

approach is to deliver proprietary designs under license and associated equipment like jacking systems, skidding systems and offshore cranes to the market.

Offshore wind energy market GustoMSC plays a dominant role in the wind turbine installation sector.

The majority of units presently active in this market have their roots in GustoMSC thinking and designs. We introduced the NG-9000C unit with its fast continuous hydraulic jacking systems and around-the-leg crane.

Currently under construction are the Brave Tern (launched by Lamprell in February), the Bold Tern and Sea Installer, scheduled for delivery in 2012.

And more units of our NG and SEA series have been or are to be delivered in 2012: a.o. Neptune, JB-117 and Seajacks Zaratan. By year-end these vessels will be operational at the different offshore wind farms in Europe.

Hatenboer-Water b.v.

Mercuriusweg 8 3113 AR SCHIEDAM PO Box 6013 3002 AA ROTTERDAM T +31 (0)10 - 409 12 00 F +31 (0)10 - 409 12 10 E info@hatenboer-water.com W www.hatenboer-water.com

Hatenboer-Water is an all-round supplier in industrial and maritime water.

Hatenboer-Water supplies cut-and-dried solutions for all your water-related challenges and basic needs: with specialist expertise, own engineering and design and a modern operating environment.

The entire process, from water intake to water distribution, can be taken care of

• reuse of waste water

for you by Hatenboer-Water. Please contact us for the supply of a standard prod-

• upgrade of brackish groundwater to process water or potable water

uct such as a pump or filter or right up to fully integrated custom-made systems,

• disinfection of different process water streams

with all necessary worldwide aftersales service.

• prevention of legionella infection • Water to your requirements…

Hatenboer-Water: Fresh in water since 1906!

A few examples of our solutions: • production of industrial process water and ultra pure water • production of boiler feedwater • reclaim of valuable components from process streams • supply of drinking water for offshore, hotels, domestic and industrial complexes • decontamination of polluted (ground)water

40 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 40

4/11/12 11:29 AM

Heerema Fabrication Group B.V.

sustainable supplier

Noordweg 8 3336 LH Zwijndrecht PO Box 58 3330 AB Zwijndrecht T +31 (0) 78 625 04 25 F +31 (0) 78 619 40 69 E info@hfg-heerema.com W www.heerema.com

Heerema Fabrication Group (HFG) is a leading contracting group which specializes in the engineering and fabrication of large and complex structures, mainly for the oil & gas and energy industry. HFG owns three large fabrication yards, situated around the North Sea, a workshop facility in Poland and a multi-disciplined facility engineering company in the Netherlands. The fabrication locations are all equipped with large prefabrication and assembly halls and rank amongst the

H

largest indoor construction facilities in Europe. All locations are large enough to handle several large projects simultaneously. units fabricated by HFG range

Offshore Wind Industry

from jackets, topsides and modules for leading oil & gas and energy companies.

Bert van Dijk, bert.vandijk@hfg-heerema.com

The engineering company HFG Engineering is specialized in fabrication-driven engineering and practical designs to offers clients an intgrated engineering and fabrication approach.

HFG is widely recognized for its fabrication-driven engineering and integrated project management capabilities to ensure execution of EPC(I) projects on time and within budget.

Oil & Gas Industry Remco van Gilst, remco.vangilst@hfg-heerema.com

Hitec Power Protection Bedrijvenpark Twente 40 7602 KB Almelo PO Box 65 7600 AB Almelo T +31 (0)546-589589 F +31 (0)546-589489 E info@hitec-ups.com W www.hitec-ups.com

Hitec Power Protection Hitec Power Protection develops, manufactures and delivers turnkey power solutions to ensure uninterruptible, continuous and conditioned power supply to mission critical processes. Core of the Hitec Power Protection solution are rotary uPS (uninterruptible Power Supply) systems using flywheel energy storage. This is proven technology, based on more than 55 years of experience

Markets

and supported by a global installed base of more than 2.000.000 kVA in high

• Internet Datacenter

demanding industries.

• Semiconductor • Telecom

A global partner to rely on

• Finance

Hitec Power Protection, with its headquarters in The Netherlands, has eight local

• Process

sales and service offices worldwide and highly qualified partners in more than

• Aviation

50 countries. Our offices are located in the united States, united Kingdom, Spain,

• Government

China, Singapore, Taiwan and Malaysia. Our global 24/7 helpdesk offers immedi-

• Healthcare

ate round the clock support where and when needed.

• Pharmaceutical • Textile • 24/7 manufacturing • Defence

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 41

41

4/11/12 11:29 AM

Hollandia b.v.

Schaardijk 23 2921 LG Krimpen a/d IJssel P.O. Box 12 2920 AA Krimpen a/d IJssel T +31 (0) 180 - 540 540 F +31 (0) 180 - 519 956 E info@hollandia.biz W www.hollandia.biz

Hollandia is one of the leading companies for the provision of steel constructions through its solid and consistent track record regarding performance and expertise in engineering and project management. With our facilities that are located at the waterfront; we have the possibility to transport steel structures by truck or by vessel.

H

provides strong coordination with other construction partners which results in Hollandia is active in a wide range of markets and segments:

an undisturbed construction process.

- Petrochemical and Oil & Gas industry - Industrial buildings and power plants

Hollandia has extended experience in working in industrial environments with

- Off shore structures

extra high standards on QA and HSE. Hollandia works according to the ISO 9001,

- Infrastructure projects

SCC** and OHSAS 18001 standards. With the EN 1090-1 accreditation Hollandia is

- Construction of large / complex buildings

ready to provide CE markings as required for upcoming legislation.

- Special projects (i.e. sports-stadiums, London Eye) The Business unit - Petrochemical & Power Industry is focused on the related type of industries and/or projects. Hollandia provides turn-key projects including (detailed) engineering, fabrication and corrosion protection, transportation and installation. This also includes secondary steel such as stairs, platforms, railings, pipe supports and cladding. Our professional and flexible project approach

Howden Thomassen Compressors Havelandseweg 8-a PO BOX 99 6990 AB Rheden The Netherlands T +31 (0) 26 4975200 F +31 (0) 26 4975201 E tcs@thomassen.com W www.thomassen.com

Howden Thomassen Compressors (HTC) was founded over 100 years ago. Since then, it has established a first-class reputation for providing quality, tailor-made compression solutions to the oil, gas, refining and chemical industries.

Our in-depth knowledge of field processes and compressor-related systems enables us to design, build, install, maintain and repair all reciprocating com-

The technical specifications of our compression systems - which meet or exceed

pressors and to service, revamp and overhaul also centrifugal compressors and

API and ISO - reflect the strict requirements of the major oil and chemical com-

steam turbines. HTC provides reciprocating compressors including all kinds of

panies. We engage in fundamental research and have developed several innova-

auxiliary equipment used in conjunction with this equipment.

tive techniques that save you time and money. We additionally offer tailor-made training courses to our customers, which are well known for their thoroughness,

HTC’s service is comprehensive and includes:

attention to detail and high standards.

- The installation, maintenance and monitoring of compression systems.

- The supply of spare parts.

- Field and factory repairs.

- 24/7 Call-Out service.

- Complete system overhauls.

- Revamping of existing compression equipment.

42 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 42

4/11/12 11:29 AM

Howden Netherlands B.V. Lansinkesweg 4 7553 AE Hengelo PO Box 975 7550 AZ Hengelo T +31 (0) 74 255 6000 F +31 (0) 74 255 6060 E cooling.fans@howden.nl W www.howdencoolingfans.com

Howden Netherlands designs and supplies industrial cooling fans. We also provide a full aftermarket service for all Howden fans, and heat exchangers installed in the Benelux countries.

Howden industrial cooling fans are designed for cooling towers, heat exchangers and steam condensers. They range in size from fans for packaged cooling systems to fans up to 25 m diameter for cooling towers.

H

Each of our cooling fan designs has its own unique characteristics in terms of efficiency, noise levels and application. We have developed our cooling fans over the last 50 years and offer the most reliable and quietest cooling fans available.

Our cooling fans are widely used in the power and petrochemical industries and for large scale HVAC applications.

HP Valves Oldenzaal B.V. Zutphenstraat 1 7575 EJ Oldenzaal PO Box 151 7570 AD Oldenzaal T +31-541519555 F +31-541522045 E sales@hpvalves.com W www.hpvalves.com

HP Valves focuses on the design, production and marketing of medium- and high-pressure valves, combining product quality and technical know-how with modern, flexible production.

From the beginning, HP Valves has taken the lead in product and process improvements. Designs and product portfolio are tailored for power-generation

Responding to the changing demands, HP Valves - a subsidiary of Indutrade

and special processes increase valve service life. CNC machinery and robotizing

AB - has evolved from a manufacturing company into a project-oriented enter-

provide cost-effective and flexible production to the highest standards.

prise providing a complete range of medium and high-pressure valves. Our customers therefore benefit from a wide array of services, from technical consulting

HP Valves products are mainly used for power-generation and other medium-

to full-scale logistics and site assistance.

and high pressure steam-applications and are approved by all major OEM’s for power generation around the globe as well as by all major petrochemical com-

We believe that building long-term relations with our clients enhances our

panies for critical applications. Clearly defining our markets resulted in a high

mutual competitiveness. Such partnerships enable us to gain a better under-

level of detailed knowledge about valves, specifications and their applications

standing of your specific requirements, allowing us to continuously improve our

in these segments.

products and services.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 43

43

4/11/12 11:29 AM

Hubert Stavoren B.V. Kooyweg 20 8715 EP Stavoren PO Box 29 8715 ZH Stavoren T +31(0)514 684 444 F +31(0)514 682 198 E info@hubert.nl W www.hubert.nl

Water intake systems For the intake of surface water out of rivers ore oceans Hubert designs, manufacture and installs complete water intake systems with various types of raked bar screens and fine screens for power, LNG, desalination and industrial

H

plants.

The product range includes: - Raked course bar screens / chain operated and cable operated / skid and embedded.

- Fine screens, such as traveling band and drum screens up to diameter of 20 meters - Micro screens - Stop logs In addition, Hubert supplies the matching debris removal systems, cathodic protection system and electrical control systems.

Huisman Equipment B.V. Admiraal Trompstraat 2 3115 HH, Schiedam PO Box 150 3100 AD, Schiedam T +31 (0)10 2452222 F +31 (0)10 2452220 E info@huisman-nl.com W www.huismanequipment.com

Huisman is a globally operating company with extensive experience in the design and manufacturing of heavy construction equipment for leading offshore companies. Our equipment, varying from stand-alone to highly engineered and integrated systems is designed and manufactured under own management.

Cranes Delivery of customised cranes, range > 100 mt:

• Drillships

• Pedestal Cranes

• Floating Cranes

• Semi-submersible Drilling Rigs

• Knuckleboom Cranes

• Land Cranes

• Mast Cranes

• Wind Turbine Installation Cranes/Shuttle

Vessel Designs

Turnkey delivery of pipelay systems: • Seven Seas: Flex, Reel & J-lay

Winches Heave Compensation Systems

Pipelay • Saipem 7000: Deepwater J-lay

New Concepts

• CSO Deep Blue: Flex, Reel & J-lay • Sapura 3000: Deepwater S-lay

We are internationally known for our technical and creative solutions,

• Seven Oceans: Reel-lay

• Borealis: Deepwater S-lay

timely delivery of high quality equipment with full capacity from day one

• Pertinacia: Flex-lay

• Aegir: Deepwater J-lay, Reel-lay and Flex-lay

and a high reliability guarantee during operations. Our production is divided

• Balder: Deepwater J-lay

between our production facilities in The Netherlands, China and the Czech

Drilling

Republic with a new production location in Brazil currently under construc-

• Land and Offshore Containerised Drilling Unit

tion. Additional sales, engineering and service offices are located in Brazil,

• Well Intervention Systems

Singapore and the USA.

44 FME ENERGy GUIDE 2012-2013

19-FME2012 profielen.indd 44

4/18/12 11:29 AM

IHC Hydrohammer B.V.

sustainable supplier

Smitweg 6 2961 AW Kinderdijk PO Box 26 2960 AA Kinderdijk T +31 (0) 78 6910302 F +31 (0) 78 6910304 E info.hh@ihcmerwede.com W www.ihchydrohammer.com W www.ihcmerwede.com

IHC Hydrohammer B.V. designs, manufactures and supplies hydraulic piling hammers, for on- and offshore use and is known throughout the world for its innovative approach.

This innovative approach is not simply confined to the hammers, but also extends to entirely new piling techniques, foundation equipment and hammer accessories, with a view to making pile driving more efficient, more controllable, less noisy and more widely usable.

I

IHC Merwede Offshore & Marine Rivierdijk 586 3371 ED / Hardinxveld-Giessendam PO Box 5 3370 AA / Hardinxveld-Giessendam PO Box 216 2920 AE Krimpen aan den IJssel T +31 (0) 184 677 300 F +31 (0) 184 677 301 E shipyard.mws@ihcmer-wede.com W www.ihcmerwede.com

Company profile IHC Merwede – offshore division The offshore division of IHC Merwede is focussed on the continuous development, design and construction of reliable, custom-built assets for the specialist oil and gas market. It is a low-risk, one-stop shop for the best design consultancy, product

technological developments, strictest safety regulations and most stringent

offering and finance package supplied to customers in the offshore market.

environmental standards for pipelay, well intervention, diving support and multi-purpose offshore support vessels.

IHC Merwede has in-house expertise for engineering and manufacturing innovative vessels and advanced equipment, as well as providing life-cycle support.

The company has several offshore equipment business units and therefore

Its integrated systematic approach has helped to develop optimum product per-

draws on a long history of designing, constructing, assembling, commissioning,

formance and long-term business partnerships.

delivering and maintaining a broad range of offshore equipment for the oil and gas sector. This varies from the fabrication of single parts to complete integrated

Due to its expertise and strong relationships with suppliers, manufacturers and

systems, such as equipment for pipe- and cablelaying, and pile driving.

sub-contractors, IHC Merwede is able to take responsibility for complete turnkey projects. The company’s production facilities in The Netherlands can accommo-

Technological innovation will remain the company’s underlying strength

date the construction of large new-build vessels and it can also build vessels in

through its continuous investment in research and development. Moreover, it

other locations around the world.

helps to safeguard a sustainable environment.

Through its pioneering role, IHC Merwede ensures compliance with the latest

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 45

45

4/11/12 11:29 AM

IMT B.V. Pascalweg 10a, 4104 BG Culemborg P.O. Box 88, 4100 AB Culemborg The Netherlands T +31 88 – 12 69 100 F +31 88 – 12 69 101 E sales@imt.eu W www.imt.eu

SOLID IN LIGHTING

IMT is a manufacturer of maintenance free lighting and signalisation systems.

We offer a complete range of products & services.

Our product range consists of:

I

- Helicopter deck Lighting

In conjunction with our international network of offices and partners, we are

- Wave off/Status light systems (for helicopter decks)

well versed in being able to offer you comprehensive and in-depth advice on

- Aviation Warning Lights and Obstruction lights

the rules & regulations for signalisation at sea an in the air (ICAO, CAP437,

- Marine Navigation Aid Systems

IMO, IALA) – specific to your particular location.

- General (emergency) Lighting - Lighting Control & Distribution panels

Further information can also be found on our website www.imt.eu.

With over 25 years of experience we have extensive knowledge of what is necessary and required to ensure that our products are suitable to withstand the rigors of harsh environments.

Tss4U Solar Power Systems for: • • • •

Cathodic Protection Instrumentation Security Lighting ...

Both safe and hazardous area. www.tss4u.nl ISO 9001-2008

46 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 46

4/11/12 11:30 AM

Jenbacher BV Kelvinring 58 2952 BG Alblasserdam PO Box 114 2950 AC Alblasserdam T +31 (0)88 0019700 F +31 (0)88 0019701 E jenbacher.netherlands@ge.com W www.gejenbacher.com

GE’s gas engine business is one of the world’s leading manufacturers of gasfueled reciprocating engines, packaged generator sets and cogeneration units for power generation. It is one of the only companies in the world focusing exclusively on gas engine technology.

Jenbacher engines range in power from 0.25 to 4 MW and run on either natural gas or a variety of other gases (e.g., biogas, landfill gas, coal mine gas, sewage gas, combustible industrial waste gases). A broad range of commercial, industrial, and municipal customers use Jenbacher products for on-site generation of power, heat, and cooling. Patented combustion systems, engine controls, and monitoring enable our power generation plants to meet all relevant international emission standards, while offering high levels of efficiency, durability,

J

and reliability.

K

Keppel Verolme Prof. Gerbrandyweg 25 3197 KK Rotterdam - Botlek PO Box 1001 3180 AA Rozenburg T +31 (0) 181 234300 F +31 (0) 181 234346 E mail@keppelverolme.nl W www.keppelverolme.nl

Keppel Verolme, a wholly-owned subsidiary of Keppel Offshore and Marine Ltd, spans over 54 hectares in Rotterdam’s Botlek area. This location in the Port of Rotterdam offers convenient access to both the North Sea and much of the vast industrial hinterland of Western and Central Europe. It is the first repair yard available when entering the Port of Rotterdam from either the English Channel or the North Sea. The yard is situated at only 11 miles sailing distance from the open sea, without any restrictions like overhead obstacles.

The Keppel Verolme yard can accommodate any seagoing vessel and floating offshore unit. The facilities of the yard comprise workshops and warehouses, three graven dry-docks, with the largest drydock measuring 405 meters in length and 90 meters in width, 2000 meters of quay side with a water depth of up to 12.00 meters, all equipped with suitable craneage.

Keppel Verolme works according quality management system which is based on the NEN-EN-ISO 9001, ISO 14001 and OHSAS 18001 requirements. yard is SCC** and ISPS certified.

With these excellent facilities, the ideal location of the yard, the high skills of dedicated employees, vast experience, the strength of the Keppel Offshore & Marine group, and willingness to adapt to ever changing market situations, Keppel Verolme offers her clients creative solutions.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 47

47

4/11/12 11:30 AM

Klip b.v.

-

van Markenstraat 2 NL-2941 BX Lekkerkerk PO Box 2517 NL-2940 AA Lekkerkerk T +31 (0) 180 452188 F +31 (0) 180 662308 E sales@klip.nl W www.klip.nl

Established in 1947 Klip is a privately owned, multi-trade full Service Industrial Contractor.

We offer a highly skilled workforce of Engineers. estimators, planners, quality control personnel and buyers in our management team. Together with our performance motivated field staff of pipe fitters, boilermakers, maintenance mechanics and operating engineers, we provide complete industrial mechanical

Mechanical & Piping.

service in the Petrochemical, Energy and Industrial Sectors.

- Engineering.

Our fabrication facilities use state-of-the-art welding and fabrication

- Main- and sub contracting for process installations and shutdowns

techniques, which allow us to prefabricate piping, vessels, steel and modular

K

assemblies in alloys ranging from carbon steel to titanium. All fabrication is

Construction codes

Certification

proudly performed in accordance with PED, ISO-9001 and VCA** safety and

- RtoD

- VCA**

quality standards.

- PD 5500

- NEN-EN-ISO 9001:2000

- ASME VII div. I

- NEN 4400-1

Types of fabrication.

- AD2000

- Marking allowance for Lloyds

- Turnkey modular assemblies from simple mount pumps to complicated

- NEN-EN 13445

- ASME Li-stamp

packages of structural steel, piping, vessels, pumps, exchangers, electrical,

- NEN-EN 13480

instrumentation, insulation.

- NEN 3650:1992(offshore)

- Distillation columns, pressure-vessels and heat exchangers.

- BRL K 903/07 ( KIWA)

- Modifications of installations and process equipment.

Kooiman Apparatenbouw B.V. Baanhoek 196 3361 GN Sliedrecht Postbus 10 3350 AA Papendrecht T +31 (0) 184 - 422833 F +31 (0) 184 - 422352 E info@kooimanbv.nl W www.kooimanbv.nl

FPO

Kooiman Apparatenbouw b.v. is a manufacturer of process equipment like shell & tube heat-exchangers and pressure vessels for the oil & gas, chemical and petro-chemical industry. Our clients are mainly companies in petrochemical and power industry.

We are manufacturing Shell & Tube heat exchangers in all known TEMA types, Air Coolers and also repairwork of heat exchangers is part of our production

extensive experience in field of metal working and working with state of the art

program. Pressure vessels, including internals and dressed when required are

machinery.

manufactured up to a wall thickness of 80 mm and in diameters up to 4.000

Welders are qualified to all processes including internal bore welding.

mm and weights up to 30 tons.

All equipment is manufactured in a very wide range of materials from plain

All the above is monitored by a quality system which is certified by Lloyds QA to

Carbon steel and Stainless steels up to more exotic materials like Nickel and

ISO 9001 also to PED module H/H1 and ASME u-stamp.

Copper alloys and Titanium.

All in solid or clad / weld-overlay execution.

We are able to perform the mechanical design to all known design codes and client specifications. For heat exchangers we also perform heat balance calculations in accordance with HTRI. All drawings are made in Auto-Cad. Our products are manufactured by very well trained and skilled craftsman with

48 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 48

4/11/12 11:30 AM

KROHNE Nederland B.V. Kerkeplaat 14 3313 LC Dordrecht Post-box 110 3300 AC Dordrecht The Netherlands T+ 31 (0)78 – 63 06 200 F + 31 (0)78 – 63 06 405 E infonl@krohne.com W www.krohne.com

KROHNE is a global leader in the area of development and production of innovative and reliable measuring technology and provides measuring solutions for all industries imaginable. KROHNE was founded in 1921 in Duisburg, Germany and has its own factories and sales offices in more than 60 countries worldwide.

The Dutch sales and service organisation is situated in Dordrecht, at the same location as the largest factory for magnetic inductive and ultrasonic flow meters in the world: KROHNE Altometer. This is also where KROHNE’S own calibration circuit is located. Approximately 60,000 instruments are produced and calibrated each year, varying in diameter from 2.5 mm to 3 metres.

Thanks to years of experience, KROHNE is familiar with the most diverse

K

applications. Our specialists are therefore able to give you excellent advice on which solution is suitable for your application.

Kuehne + Nagel N.V. Lloydstraat 35 NL - 3024 EA Rotterdam P.O. Box 1294 NL - 3000 BG Rotterdam T +31 (0)252 467590 E knnl.oilandgas@kuehne-nagel.com W www.kuehne-nagel.com

Our dedicated Oil & Gas staff (more than 600) within the worldwide network ensure that your shipments are in safe hands wherever in the world. Kuehne + Nagel’s Oil & Gas capabilities encompass all transportation services to move your freight throughout the entire supply chain.

Kuehne + Nagel’s Oil & Gas capabilities help energy organizations manage

Kuehne + Nagel provides:

logistics strategy and operations across functional areas, including order management, transportation management, physical distribution and supply chain

• Supply Chain Management

security.

• Rig & Maritime Support • Supply Base to Base Logistics

We can help you leverage logistics resources to improve customer fulfillment

• Project Management

and capitalize on new market opportunities.

• Key Account Management Putting the Energy into your Supply Chain!

FME ENERGy GuiDE 2012-2013

19-FME2012 profielen.indd 49

49

4/18/12 2:08 PM

Lovink Enertech b.v.

sustainable supplier

Lovinkweg 3 7061 DT Terborg PO Box 111 7060 AC Terborg T +31 (0)315 335600 F +31 (0)315341547 E info.le@lovink.com W www.lovink-enertech.com

Lovink Enertech specialises in the development, production and supply of reliable, innovative and patented cable accessories. The company has been manufacturing components for cable accessories since 1919. The range of products consists of cable joints and terminations for all types of medium voltage cables.

In 2006 and 2008 Lovink was for instance selected for the revision of the LoviSil® fluid silicone technology

medium-voltage network at the Shell Bukom refinery plant in Singapore. The LoviSil® joints were used to connect 24 kV XLPE cable. The Lovink products are

Because of the high water level in Holland, from the outset Lovink paid a lot of

also approved by Middle East companies like TAKREER and ADGAS. The long-term

attention to soil conditions in the designing of underground cable accessories.

experience and world wide presence makes Lovink is your logical partner in

This resulted in the development of LoviSil® fluid silicone jointing technology.

cable connections.

This proven technology has a reputable track record for over 20 years and offers the highest network reliability with a failure rate lower than 0,1%. LoviSil® medium voltage joints are also hydrocarbon resistant and can perfectly deal with polluted soil. Furthermore this jointing technology does not need external

L

heat sources for installation. This makes LoviSil® a perfect joint for oil, gas and petro-chemical plants.

M M&I-Labtech B.V. Tankhoofd 7-8 3196 KE Vondelingenplaat RT T +31 (0) 10 2630777 F +31 (0) 10 4160927 E info@mi-labtech.com W www.mi-labtech.com

M&I-Labtech is specialized in the design, engineering, supply and installation of turnkey laboratories, tailor made to clients sampling and analytical requirements. The company has since 1993 executed more then 300 projects, worldwide and for a large number of 1st class international companies.

Our clients can be found among international EPC-contractors, industrial enterprises and international governmental organizations. “One stop shop”, M&ILabtech takes responsibility for supply of all laboratory equipment as well as for the installation and commissioning on site. Furthermore we can give the necessary training to operators.

Key features: - Technical knowledge of laboratory equipment requirements - Extensive experience with project documentation requirements - Worldwide network of suppliers, agents and contacts - Worldwide references in laboratory projects

50 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 50

4/11/12 11:30 AM

Mechanische Industrie Menzing

THERE’S A WORLD TO

EXPLORE

Nijverheidsstraat 5 7482 GZ Haaksbergen PO Box 123 7480 AC Haaksbergen T +31 (0) 53 5723915 F +31 (0) 53 5723925 E j.veenhoven@menzing.nl W www.menzing.nl

In roughly 50 year of its existence, Mechanische Industrie Menzing has developed into a leading specialist in the processing of exotic materials into high value customer-specific products and high value customer-specific (sub)

LEADING SPECIALIST IN THE PROCESSING OF EXOTIC MATERIALS

assemblies.

Our customer base is made up of well-known international businesses that

Material management and effective control over all process stages are combined

supply applications for the offshore, petrochemical, oil and gas extraction,

with special expertise in the machining of exotic materials. As a result, we are

vacuum technology and high pressure sectors, amongst others. Applications

able to guarantee a very high level of reliability, speed and flexibility. We would be

that have been developed based upon years of intensive research and are used

pleased to examine with you what possibilities exist for the mutual collaboration.

under extreme and highly demanding conditions. understandably, this has

Stamp Authorized By Lloyds and TuV

farreaching consequences for the requirements that have to be exacted on the manufacturing process. We understand these requirements and have incorpo-

Contact:

rated them into our organization.

J. Veenhoven, Manager T +31 (0) 53 5730007

M Merford Franklinweg 8 4207HZ Gorinchem PO Box 160 4200 AD Gorinchem T +31-183675000 F +31-183626440 E info@merford.nl W www.merford.nl

Merford has a unique position when it comes to reducing noise in the environment. For practically every situation, Merford designs a solution to noise problems and guarantees an acoustic end result.

Merford has more than 30 years experience in supplying custom-made noise control solutions, considering also conditions like ventilation and fire

• High, medium and low voltage areas

safety. Solutions consist of sound insulating enclosures, silencers, (acoustic)

• Electricity substations

ventilation grills, acoustic doors, or a combination of these products.

• Linking stations

Reducing noise in power / energy industry concern e.g.: • Steam / gas turbines • Transformers / transformer rooms • Engines / engine rooms • Boilers • Cogeneration stations • Compressors • Cooling systems / condensors • Pumps • Valves

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 51

51

4/11/12 11:30 AM

MFE Loubergweg 7 6961 EJ Eerbeek PO Box 49 6960 AA Eerbeek T 0031 313 674 674 F 0031 313 674 675 E info@mfe.nl W www.mfe.nl

Best Solutions for Energy MFE MFE is a customer focused organization able to offer fully traceable and flexible solutions for the oil and gas, power generation, wind energy, offshore and maritime markets.

Machining MFE produces large high-precision shafts, rollers and machine parts. With

Engineering

its wide array of machinery, work pieces up to 20 meters and 100 Ton can be

From the start of the design phase, our team of experienced engineers works

handled. Machining includes turning, milling, grinding, dynamic balancing and

closely together with you in order to-along with our extensive knowledge of pro-

deephole drilling.

duction processes- propose the best possible solution. Dedicated project managers are your one point of contact.

Assembly and Maintenance Our VCA* 2008/5.1 certified mechanics, works on in-house assembly projects, as

Construction

well on location for the maintenance, service and repair of industrial installa-

MFE is NEN/EN 3834-2 certified and our skilled certified welders, produce com-

tions.

plex welded constructions in compliance with LRS, ABS, DNV, BV and other certi-

To be able to comply to your quality standards with a focus to create a sustain-

fying body standards.

able industry MFE is ISO 9001-2008 and ISO 14001-2004 certified.

M N

NEM Energy b.v Kanaalpark 159 2312 JW Leiden PO Box 162 2300 AD Leiden T +31 (0)71 5792444 F +31 (0)71 5792792 E info@nem.nl W www.nem-group.com

NEM is a globally leading engineering company in the field of steam generating equipment. NEM’s HRSGs are installed on hundreds of power plants worldwide. Since the 1960s, the company supplies custom made solutions regarding Heat recovery Steam Generators and Industrial and utility Boilers for power generation and industrial applications throughout the world.

Distinctive know-how and technological innovation NEM’s HRSGs take up the largest portion of the company’s activities. The firm’s driving forces are its distinctive know-how and continuous technological innovation, with an eye for new applications such as steam generation for enhanced oil recovery and solar power applications.

Product range The head office of NEM Energy b.v. is located in Leiden, the Netherlands. Our product range can be divided as following: Heat recovery Steam Generators, Industrial and utility Boilers, Waste-to-Energy Steam Generators, Enhanced Oil Recovery Once Through-HRSGs, Water/Steam Cycles for Concentrated Solar Power, Diverters and Dampers.

52 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 52

4/11/12 11:30 AM

Petrogas Gas Systems Harderwijkweg 2 2803 PW Gouda PO Box 20 2800 AA Gouda T +31-182565395 F +31-182565395 E sales@petrogas.nl W www.petrogas.nl

Petrogas design and manufacture skid mounted systems for the gas/energy distribution companies and power industry. With an experience of 60 years Petrogas supplied their installation for power plants and gas distribution companies worldwide, from Mexico to Singapore and from the Russia to Australia.

The installations can be supplied according to all international rules and regulations of local gas/energy distribution companies.

• Special skid mounted process units. + Gas Dehydration and glycol regeneration system.

• The product range is:

+ Gas mixining installations.

Natural gas receiving stations consisting of ESD inlet valves, condensate removal, filtering, heating, pressure reducing, custody transfer metering &

The skid-mounted concept reduces the erection, commissioning and start-up

analyzer sections.

time on the site. Training programs for the operators can be provided.

• Modular skid mounted units around the gasturbine. + Final runs with filters and/or filter/separators, metering sections, electrical start-up heaters and efficiency heating with hot water or steam. + Fuel oil installations such as unloading, forwarding and transfer pump skids to the gasturbine, including heating and metering. + LPG units for the startup or continuous operation of gasturbines.

Power Piping International De Sonman 15 5066 GJ Moergestel PO Box 464 5004 DC Tilburg T +31 (0)13 595 2923 F +31 (0)13 595 2924 E casper@powerpiping.nl W www.powerpiping.nl

P

Power Piping International BV is part of VOC Holding BV located in Moergestel, The Netherlands.

Power Piping Int’l BV (ISO 9001:2008) is actively involved in the design, detail engineering, manufacturing and supply of a complete line of insulated and noninsulated pipe support systems from our facility in Moergestel, The Netherlands.

Products and services:

Also part of VOC Holding BV is Insu-W-Rapid BV Thermal Insulation Products; a supplier of a complete package of ancillary materials for the thermal insulation

• POWERFOAM SuPERSCRIPT High Density Polyurethane insulated pipe supports

industry worldwide. Insu-W-Rapid BV is ISO 9001:2000 certified and offers a

and anchors are specifically developed for low- and cryogenic temperature

one-stop- shop concept for the insulation contractor with products ranging from

piping systems. Fully insulated POWERFOAM™ cryogenic pipe anchors, fully

jacketing, banding, fastening and finishing products. Quality products against

tested under load and cryogenic conditions by independent laboratories with

competitive pricing, short communication lines, customer satisfaction and excellent logistical location are key words.

new formulated high-density foams with a zero ODP for ecological purposes.

• Timtherm® insulated pipe supports for high temperature piping systems.

Engineered high density calcium silicate pipe supports that prevent hot spots in high temperature piping.

• Permali pipe supports • Fabricated pipe supports

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 53

53

4/11/12 11:30 AM

RebelGroup Advisory Rebel Wijnhaven 23 3011 WH Rotterdam T +31 10 2755995 E info@RebelGroup.com W www.rebelgroup.com

Rebel is a platform of entrepreneurs which want to bring about valuable changes in the world. At the intersection of public and private, as our passion is where social values and private entrepreneurship come together. This complex relationship between public interests and private realities is specifically evident within the market of energy generation and savings. We contribute to the effective realisation of sustainable energy projects in the Netherlands and beyond.

Through public-private collaborations, the financing of complex business cases, structuring, contracts, sustainable purchasing, DBFM contracts, shaping Socially Responsible Enterprising, smart financing and the consideration for societal interests in intelligent incentive structures. For small and medium sized companies, large companies and government authorities.

We believe changing over to sustainable energy isn’t a luxury, but a necessity. This change can only be realised in a professional business-like manner where front runners – both public and private – take the lead. By effectively identifying risks and persisting with a correct role fulfilment in agile partnerships. We would gladly translate the complex task into a viable business case together with you. NO CHANGE WITHOuT A REBEL. sustainable supplier

R

ADVERT INDEX A. de Jong Groep....................................................................................................................................................................................................................................................... 2 Aarding Thermal Acoustics ..............................................................................................................................................................................................................................64 AEG Power Solutions..............................................................................................................................................................................................................................................8 AIB Vincotte Nederland .......................................................................................................................................................................................................................................12 Cirmac International ..........................................................................................................................................................................................................................................64 Elster /s.a. Elster Instromet ...............................................................................................................................................................................................................................22 Geha Machinefabriek ............................................................................................................................................................................................................................................4 Navingo ..................................................................................................................................................................................................................................................................... 70 Power Piping International ...............................................................................................................................................................................................................................75 SGS Nederland ........................................................................................................................................................................................................................................................34 Stork Technical Services Holding .............................................................................................................................................................................................................36, 37 Tss4u .......................................................................................................................................................................................................................................................................... 46 Twentsche Kabelfabriek ......................................................................................................................................................................................................................................16 Van Oord Offshore Wind Projects ..................................................................................................................................................................................................................10 Weir Minerals Netherlands.................................................................................................................................................................................................................................6 Willteco ..................................................................................................................................................................................................................................................................... 76

54 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 54

4/11/12 11:30 AM

DE REGT Marine Cables B.V. Zaag 2 2931 LD Krimpen aan de Lek T +31-180 66 88 00 F +31-180 66 88 99 E info@deregtcables.com W www.deregtcables.com

DE REGT Marine Cables is -and has been- a prominent name in the design and manufacture of Custom-engineered, specialty, dynamic or static cable solutions used in subsea applications. The company boasts over 90 years of technological innovation and strength around cable design. These have been applied in many areas; the Oil & Energy sector, Defence, Seismic Exploration and scientific projects.

The company’s engineering design departments include all the disciplines required for the specification and design of cable systems for subsea and surface applications. DE REGT Marine Cables has a strong team of engineers, capable of working on conceptual design studies as well as working on a project level, translating concepts to products.

Royal Haskoning Nederland George Hintzenweg 85 3068AX Rotterdam Postbus 8520 3009AM Rotterdam T +31-104433666 F +31-104433688 E info@rotterdam.royalhaskoning.com W www.royalhaskoning.com

R The world is changing, the global energy demand increases. Royal Haskoning is committed to work with our clients in partnerships to achieve sustainable and innovative solutions in an increasingly complex society. We work in close cooperation to overcome issues in supply, demand, energy security and decarbonisation, utilizing innovations such as carbon capture storage, algae technology, biogas recovery from waste and low head hydro. Within the energy sector we are actively involved in areas such as renewables, biomass, transmission and resource recovery. The global and local expertise and experience of our professionals allow us to consider all technical, logistical, environmental and economic aspects of your project.

About Royal Haskoning Royal Haskoning is one of Europe’s leading project management, engineering and consultancy providers. With a strategic global presence, it provides an extensive range of multi-disciplinary services that relate to industry and energy, planning and transport, maritime and waterways, water and water management and buildings. With a worldwide network of professionals and strong industry relationships established over 130 years, its extensive expertise and experience provides a fully integrated one-company approach to projects.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 55

55

4/11/12 11:30 AM

Sarens Nederland bv Pieter Hoebeeweg 99, NL 3316 BT Dordrecht Postbus 1055, NL 3300 BB Dordrecht T : +31 (0)78 648 29 29 F : +31 (0)78 631 31 81 W : www.sarens.nl

FPO

E : info@sarens.nl

In addition to straightforward crane rental, Sarens Nederland also offers total solutions in the field of horizontal and vertical transport, domestically as well as internationally. By bundling the strengths of the versatile companies of the Sarens Nederland Group, we are in a position to offer a solution to any challenge.

The companies that are part of the Sarens Nederland Group are Sarens Beton Montage, Sarens Steel Erectors and Sarens Materieel.

Safety and quality form an important part of our services. We are NEN-EN-ISO 9001:2008, OHSAS 18001:2007 and SSC for the Petrochemical Industry certified.

By involving Sarens Nederland at an early stage, we can assist you from the very beginning in finding the most efficient solutions. Safety, quality and commitment are key considerations in this regard and therefore offer you the assurance of achieving optimal results.

Saval Fire Protection Huifakkerstraat 22 4815 PN Breda PO Box 3499 4800 DL Breda T +31 (0) 76 5487000 F +31 (0) 76 5417922 E systems@saval.nl W www.saval.nl

S

Protection of life and capital equipment requires a professional and specialized system. Saval offers custom made solutions, specially designed in accordance with client specifications, including supervision and commissioning for your fire & gas detection and fire suppression systems.

From then ‘till now

up to date. Due to flexibility, experience and a willing ear in listening to the demands from the field, Saval is a very steady business partner for Fire & Gas

Saval started manufacturing extinguishers back in 1925 and is still a leading

projects.

company for fire fighting equipment such as: Since 2010, Saval is part of the SK Fire & Security Group.

Fire detection and fire suppression combined in total integrated fire control and management systems.

Storage tank protection

Constant care for quality and reliability of the products is a main company rule.

Saval BV is an experienced leading company for fire protection of storage tanks.

Especially our CFI rim seal protection systems are famous all over the world.

ISO 9001 and AQAP 4 certifications are proof of this philosophy.

Saval is involved in various aspects of security, environment and economy.

Never ending changes in points of view keep our design and research teams

56 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 56

4/11/12 11:30 AM

Schelde Exotech B.V. Koningsweg 2 4381 NA Vlissingen PO Box 531 4380 AM Vlissingen T +31 (0)118 485901 F +31 (0)118 485959 E info@exo.schelde.com W www.exotech.nl

Member of the VE Group B.V.

Schelde Exotech was founded in 1998, and has arisen from AKF Goes, Schelde Boiler Division and Schelde MT-Products. With the specific knowledge of these three companies a wide range of customers has been established in the chemical and petrochemical industries, electrical power plants, uranium enrichment facilities and research institutes. Among our customers are: DOW Chemical, Shell, yara, Essent, urenco, CERN, EPZ, Eastman, Indorama, DSM and many other

manufactured in temperature and humidity controlled conditions. Repair and

well known companies.

replacement of this equipment can be done in our workshops in Vlissingen as well as at the customer’s location. Shipments are possible by road and

The engineers of Schelde Exotech develop, in consultation with the customer,

open water.

products which are produced in Vlissingen. They work with 3-D engineering software and the production department uses sophisticated production techniques such as waterjet cutting, nc controlled machining and electron beam welding.

The main activities are concentrated on the processing and welding of exotic and high alloyed materials. Nearly all conceivable welding processes are qualified and applied.

Schelde Exotech possess several quality certificates such as ISO 9001:2000, ASME VIII Div 1&2, PED and China Manufacturing License.

Schelde Exotech located in Vlissingen - The Netherlands, covers 13,000 m2 production workshops, including two cleanrooms in which equipment can be

SGS Nederland B.V. Industrial Services Malledijk 18 3208 LA Spijkenisse Postbus 200 3200 AE Spijkenisse T 0031 181 69 36 30 F 0031 181 69 35 86 E nl.ndt.sales@sgs.com W www.nl.sgs.com/industrial

S

Industrial Services, as one of the biggest Business Lines of the SGS Group, is a global service provider for technical verification, inspection, testing and conformity assessment, instilling confidence to clients. SGS support the integrity, safety and reliability of your activities, equipment and operations with technical solutions.

We have decades of experience and some remarkable references in serving key

We ensure that our customers’ installations, material, equipment, facilities and

industries, such as:

projects meet all quality and performance requirements, whether they are regu-

• Construction Industry

latory, voluntary or customer based. We have a comprehensive suite of services

• Industrial Manufacturing & Trade

to help industrial and manufacturing processes run smoothly – whether you are

• Oil, Gas and Petrochemical Industry

fabricating components, or finished products to be sold directly to consumers.

• Power Generation and Transmission

SGS is actively involved in a very broad range of services, such as In-Service

• Wind Energy

Inspections (Tank storage inspection), Non-Destructive Testing (Radiography,

Industrial Services is your local partner with global experience and connections.

ultrasonic Testing, Guided Wave Inspection, Time of Flight Diffraction - ToFD),

Our strength lies in understanding our customers’ operational challenges and

Product Certification (CE-Marking, Pressure Equipment Certification, Lifts

adding value by providing dedicated solutions.

and Machinery Directive). Thanks to their experience and wide-ranging skills, our experts are adept at helping you build a better, stronger, more competitive and profitable business.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 57

57

4/11/12 11:30 AM

Sinus Jevi Electric Heating Nijverheidsweg 2 1671 GC Medemblik T +31 (0) 227 - 549100 F +31 (0) 227 - 549150 E info@sinusjevi.com W www. sinusjevi.com

Sinus-Jevi Electric Heating B.V. Is a leading company in the field of industrial electric heating equipment and installations. Design and manufacturing of high quality heating installations for the offshore, petrochemical and process industries are areas where Sinus-Jevi Electric Heating B.V. has built up a reputation over the years.

Flameproof heaters complete with control panels are certified according to the ATEX 94/9/EC directive. Furthermore the design and manufacturing takes place

Special applications:

according to customer specifications to the codes of ASME VIII - AD 2000 - EN

- Fuel gas pre and after heating

13445 - RToD Stoomwezen - PD 5500 and in accordance with the PED directives.

- Glycol regeneration boilers - Heating mineral, heavy and heat transfer oil

The manufacturing programme contains:

- Heating and super heating hydrogen, nitrogen, regeneration gas, steam etc.

- Flameproof immersion heater batteries

- Load resistors

- Flameproof heater vessels - Flameproof air heaters

They find themselves lucky to have a professional staff with expertise in working

- Flameproof gas heaters

on projects for international contractors. Needless to say they are very eager to

- Miscellaneous industrial appliances

solve your heating problems safe and sound. So if you have one, call one of the

- Control panels

engineers of Sinus Jevi Electric Heating. you can rely on them.

NEN-EN-ISO 9001:2000, ATEX 94/9/EC, IECEx and GOST R certified Member of the Swedish Nibe Group

Smit Transformatoren

sustainable supplier

Groenestraat 336 6531 HJ Nijmegen PO Box 9107 6500 HJ Nijmegen T +31 (0) 24 3568 911 F +31 (0) 24 3568 598 E info@smit-trafo.nl W www.smittransformatoren.nl

S

Smit Transformatoren B.V. is an internationally orientated company which has designed and manufactured large power transformers since 1913 in Nijmegen.

Smit Transformatoren B.V. is part of the SGB-SMIT GROuP and as a group we are capable of designing and manufacturing transformers from 50kVA up to 1200 MVA and voltages up to 800kV. Our customers are mainly energy generation, distribution and transmission companies worldwide. Although Smit has

Final installation at sites worldwide is managed by Smit in cooperation with

been in business for almost 100 years, the company is innovative and always

local suppliers. Smit Transformer Services (STS) is a separate business unit, taking

looking for new opportunities to improve and renew. Our main strength is the

care of after sales and transformer refurbishment, diagnostics and maintenance

proven combination of excellent technology, efficient manufacturing processes

of transformers of all different brands.

and quality awareness.

Our manufacturing portfolio consists of: Complex and unique transformer designs and calculations enable Smit to meet

- Grid Transformers

individual customer demands and we link fully integrated design programs to

- Generator Step-up Transformers

a very modern production and testing environment. Our test programs include

- Auto Transformers

electrical and functional tests to comply with the internationally recognized

- Phase Shifters

standards such as IEC and ANSI. We include specific tests regarding temperature

- Series and Shunt Reactors

rise, impulse voltage withstand and noise measurements.

- Quad Boosters

58 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 58

4/11/12 11:30 AM

Stork Technical Services

sustainable supplier

Van Deventerlaan 101, 3528 AG, utrecht, P.O. Box 2776, 3500 GT, utrecht, The Netherlands T +31 (0) 30 669 17 00 F +31 (0) 30 666 4733 E info.technicalservices@stork.com W www.storktechnicalservices.com

Improving performance, reducing cost When you partner with Stork Technical Services, you get more than just effective, efficient and safe services. you reap the rewards of our integrated, innovative and international approach. And you access the very best in terms of people, processes and technologies.

An unrivalled support partner That’s because we’re a partner. A partner that saves you money, speeds up your

Through the provision of our unrivalled suite of asset integrity services,

operations and solves your problems. We do this by combining several services

we partner with operators and tier-one contractors worldwide, we help

in one contract. By working innovatively using the latest equipment and tech-

to deliver:

niques. By operating bases around the world. And by employing multi-skilled teams trained to the highest standards in the industry. They minimize interrup-

• improved HSEQ performance

tions and downtime. They cut the number of suppliers you need, with all the

• asset integrity assurance

associated administration that requires. And they lead to safer working practices

• asset lifespan extension

and environments.

• increased operating efficiency • energy efficiency solutions

Visit our website www.storktechnicalservices.com to view our service portfolio and find out how we can add value for you.

Sulzer Turbo Services Rotterdam B.V. Moezelweg 190 NL-3198 LS Europoort Rt. T +31 (0) 181 282000 F +31 (0) 181 282002 W www.sulzerts.com

Sulzer Turbo Services provides comprehensive repair, refurbishment, and maintenance on rotating equipment on a global basis. As the leading non-OEM provider

S

of turbines, compressors and other rotating equipment repair services, Sulzer Turbo services can offer reliable, effective and efficient solutions to problems on any brand of thermal rotating equipment. Our services are available 24 hours a day, 365 days a year.

Field Service:

Shop service:

As an independent specialist Sulzer Turbo Services Rotterdam provide services

Sulzer Turbo Services Rotterdam offers all basic repair and overhaul services

as major inspections, repair and maintenance for steam turbines, centrifugal

such as, manufacturing of blades, nozzles, diaphragms and impellers, advanced

compressor, recip compressors, expanders and other thermal rotating equip-

welding repair for rotors, coatings and high speed balancing. In case repair is not

ment. This service can be performed on scheduled or unscheduled emergency

possible Sulzer Turbo Services Rotterdam has the capabilities, experience and

maintenance.

technical know-how to manufacture new parts based on reversed engineering.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 59

59

4/11/12 11:30 AM

Tss4U B.V. De Run 4306 5503 LN Veldhoven The Netherlands PO Box 2191 5500 BD Veldhoven The Netherlands T +31 (0) 40 235 1702 F +31 (0) 40 235 1881 E info@tss4u.nl W www.tss4u.nl

Tss4U is specialized in customized solar power systems for industrial applications. Our head office is based in the Netherlands. We serve our Middle East customers through our affiliate Tss4U ME in Abu Dhabi. We pro-actively serve our other markets worldwide with selected partners.

Industrial applications • Offshore platforms

Total cost of ownership

• Pipelines

Tss4u meets your power requirements in remote areas by simply converting the local

• Valve stations

amount of sun into the required amount of energy while meeting stringent functional

• Wellheads

specifications in terms of operation, safety, quality and lifetime expectancy. From

• Telecom stations

design to after sales, working with Tss4u results in an attractive total cost of ownership.

• Security systems • Instrumentation

Hazardous area’s (Ex-proof)

• …

Tss4u is one of the few solar companies worldwide that is certified for the design, engineering and supply of ATEX Zone 1 complete systems. With carefully

Quality

selected suppliers, our own ATEX Zone 1 certified solar module and our extensive

Tss4u is ISO 9001:2008 certified.

experience in this very demanding application area, we help our customers meeting their power requirements in hazardous areas.

Machinefabriek Tuin BV Tottenhamstraat 54 7701 BP Dedemsvaart PO Box 175 7700 AD Dedemsvaart The Netherlands T +31 523 615551 F + 31 523 614981 E info@tuin.nl W www.tuin.nl

T

Machinefabriek Tuin BV established in 1906 is a reliable partner in the manufacturing of machine components made from Special alloys (as Alloy 718 - Hastalloy) , stainless steel, aluminum and steel .

Quality, flexibility and reliability. That’s what we stand for.

We produce the most complex components in an efficient manner on our state of the art machine park. Our strength lies in the machining of special alloy products.

We excel in production, perfection and unburdening the customer.

We take care of the entire manufacturing process for you; from acquiring materials all the way up to finishing treatments.

Due to the expertise of our experienced employees, we are able to create customized solutions designed to your needs. Our up to date ERP-system assists us in closely monitoring the entire process.

Core Activities

Deephole Drilling Deephole drilling is one of our specialties. With meticulous precision we drill both centric and eccentric holes; varied from small diameters with extreme lengths. A challenge on the job is what we like.

Construction For the construction of complex machine components of steel, stainless steel and aluminum we are the right choice! For welding of aluminum and stainless steel we have separated working area.

CNC Milling and Turning On our modern equipped machine park we can efficiently milling and turning products in small to medium series. Our excellent automation allows us to be flexible and offer you the high quality that you demand.

60 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 60

4/11/12 11:30 AM

Twentsche Kabelfabriek

sustainable supplier

Spinnerstraat 15 7481 KJ, Haaksbergen Nederland PO Box 6 7480 AA, Haaksbergen T +31 53 573 2255 F +31 53 573 2185 E info@tkf.nl W http://www.tkf.nl

TKF – Reliable in connections!

Since its establishment in 1930, TKF (BV Twentsche Kabelfabriek) has developed from a cable producer purely oriented on The Netherlands to a technologically leading supplier of cable solutions with customers all over the world. As part of TKH Group NV, TKF has access to various international marketing, purchasing, sales and research groups with diverse specialisms.

Reliability forms the basis of TKF’s operations and this applies for its technology, products, logistics and services. In addition, thinking along with the customer and flexibility are essential for TKF. TKF focuses on a number of market segments: Broadband, Energy, Marine & Offshore, Installation, Industry and Infra. As a result, TKF can offer better and customer-specific cable solutions and the quality of the solution always meet the strictest requirements.

Together with its customers, TKF continues to develop: the way to distinguish itself now and in the future.

Choose TKF - Choose quality!

Van Beest B.V. Industrieweg 6 3361HJ Sliedrecht PO Box 57 3360AB Sliedrecht T +31-184413300 F +31-184414959 E sales@vanbeest.com W www.vanbeest.com

Van Beest is a leading manufacturer and supplier for a complete program of standard fittings for chain and steel wire rope. For over 90 years the production

T

of high tensile shackles has been our core business.

Van Beest manufactures these high quality Green Pin® shackles in its own production facility in The Netherlands. A genuine “Made in Holland” product.

Since 2007 the Excel chain accessories factory in France is part of the Van Beest

Furthermore many shipbuilders and owners worldwide choose Green Pin®

International group. In this factory we produce an extensive program of chain

products for their reliability and high quality. Apart from maritime applica-

accessories, like for example: grade 8 and 10 hooks, lifting points, swivels etc.

tions, our products are used in various other environments. For example in the

Van Beest has branches in Germany, France and the uSA, and exports to more

construction of civil works. And there are countless other applications. Any kind

than 80 countries worldwide.

of lifting, lashing, mooring and joining can be done with Green Pin® products.

A very demanding user group is the offshore industry. In oil and gas production,

Therefore you will find them in almost any kind of industry.

V

safety is all-important. In this high-risk environment, one can rely on the continuous high quality of Van Beest products. For this reason Green Pin® Standard

Green Pin® your reliable partner!

and Polar shackles have DNV 2.7-1 Type Approval.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 61

61

4/11/12 11:30 AM

Van Dam B.V. PO Box 53 4793 ZH Fijnaart THE NETHERLANDS T +31 (0) 167 529600 F +31 (0) 167 529601 E info@van-dam.nl W www.van-dam.nl

Expertise & Focus in the Oil & Gas Industry Van Dam provides both the external and internal architectural fit-out for Oil & Gas offshore structures. The architectural package is part of our ‘one-stop shopping’ concept. Fire and Blast protective products and solutions: to protect personnel and critical safety equipment!

The Total Concept

Doors Both external and internal

Our core business and focus in the Oil & Gas Industry! Focus is on the com-

• Blast-resistant doors

plete external and internal architectural package, we supply features from our

• Fire rated doors

• Watertight and gastight doors

own product range: blast walls, fire walls, doors, windows, the complete internal partitioning, winterizing walls and all interfacing work. Our services include the

Typical applications for our solutions:

design and engineering, manufacturing, supplying the products and even super-

Living Quarters (LQ) and protective compartments in the Oil & Gas Industry,

vising the installation on site. Full installation can also be incorporated!

both on and off-shore.

Blast & Fire Walls

• Production Platforms, fixed and floating

• FPSO, FSO

• TLPs, Spars and Semi Subs

• Typical offshore topside modules

• Blast-resistant or relieving walls • Fire-rated walls & cladding

Van Dam, serving you with high-level integrated solutions. Designed and

• Jet-fire walls

engineered to meet the requirements of the application.

• Winterizing walls

Let our experience be your added value!

Safety, Security, Reliability, Sustainability and Longevity.

Van Heck B.V. P.O. Box 14 8390 AA Noordwolde The Netherlands T +31 (0)561 431739 F +31 (0)561 431766 E info@vanheckgroup.com W www.vanheckgroup.com

Our company has specialized itself in engineering, designing, development, construction, installation and operation of diesel, hydraulically and electrically driven pump units, siphon arrangements and ballasting systems.

Our pumps can be used for cable trenching, dredging works, offshore operations, temporary sewage and/or cooling water installations, fire fighting, polder drainage, salvage work and pipeline cleaning. The maximum capacity of a single 3

pump unit is 8,000 m /hour and the pressure goes up to 36 bar.

V

Our rental fleet is built to meet the latest regulations concerning noise, emission and environment.

In the offshore industry Van Heck stands for a professional and specialized approach.

We can customize our approach to meet our client’s particular wishes depending on the complexity of the project. Examples of the various options are: - Van Heck can undertake the entire project or be brought in for specific

- For less complicated applications the client can hire or purchase the manually controlled mini ballast equipment. One of the major advantages of our system is the rapid installation; - The equipment can be mobilized from either The Netherlands or from our South East Asian Base (Singapore).

elements, using our equipment;

62 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 62

4/11/12 11:30 AM

Varco BJ B.V. Nijverheidsweg 45 4879 AP Etten - Leur PO Box 17 4870 AA Etten - Leur T +31 (0) 76 5083000 F +31 (0) 76 5046000 E receptie@nov.com W www.nov.com

Varco BJ B.V. is a subsidiary of Houston based National Oilwell Varco, which manufactures complete land drilling rigs and in combination with various shipyards around the world also delivers complete drilling and service packages for the drill ships, semi submersibles and jack ups used for drilling for oil and gas.

Our manufacturing plant in Etten - Leur is the head office of the handling tool division. We have at the moment 256 persons working at our manufacturing

We are API 8A,8C and 7K licensed and ABS PQA certified. Our management

plant and offices. The handling tools are used for handling all the tubulars used

system is ISO 9001:2008 certified. All of our equipment complies with the

for various applications during the drilling process.

Machinery and ATEX directives.

The tools can be manual, pneumatic or hydraulic operated.

We continuously develop, with our own team of engineers, new systems and tools which makes the work environment on drilling rigs safer and more efficient and are worldwide accepted as the best quality tools by operators and drilling contractors.

Our machines do consist for almost 100% of CNC machines and efficient equipment to effect Magnetic Partical Inspection and load testing of all the equipment manufactured.

Verebus Engineering Handelskade 49 2288 BA Rijswijk PO Box 1045 2280 CA Rijswijk T +31 (0)70 352 82 00 F +31 (0)70 – 352 82 05 E verebus@verebus.nl W www.verebus.nl

Verebus Engineering is an engineering consulting firm with clients in the market segments: defence, infrastructure (including rail infrastructure), marine & offshore, aviation and the energy and building sectors.

Our activities include consultancy, design, engineering, as built services, managing (hosting) your technical documentation (systems), developing training courses, and training of your staff. We offer support during the complete life cycle of

As a result we develop and produce technical information which exactly meets

your technical systems and installations. We are independent. If requested or

your needs and wishes, regarding the purpose, the user and the most optimal

required we will work with partners on projects on a complementary basis.

form of the documentation. Examples are: technical manuals/product infor-

V

mation; training documentation and computer-based training; (interactive) Verebus offers a unique combination of:

technical documentation, including help functions and e-books; procedures,

• technical knowledge including a broad variety of engineering processes,

instructions and descriptions; training or maintenance worksheets; exploded-

• understanding of the various user groups’ needs and abilities,

view drawings and illustrations for use in catalogues or spare parts manuals.

• ability to harmonise the information concerned,

Verebus Engineering is member of TÜV NORD Group.

• writer skills and ICT experience.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 63

63

4/11/12 11:30 AM

WWW.AARDING.COM Design & Engineering, Manufacturing and Installation of:

Gas Turbine Exhaust Systems & Silencer Applications certified by Lloyd’s

Simple Cycle Exhaust System

ISO-9001:2008 Vent Silencer

Offices The Netherlands Singapore USA

7

HRSG Internal Insulation

Silencer Exhaust Bypass System 3

Exhaust Duct

6

5

7

4

6

4 1

3

2

2 5

Exhaust / HRSG Inlet Duct Exhaust Diffuser / Exhaust Plenum 1

ACTIVE IN THE POWER AND PETRO-CHEMICAL MARKET FOR NEW AND RETROFIT PROJECTS

11032_advertentie liggend A4.indd 1

08-02-11 09:26

cirmac.com

nitrogen

biogas

gas treatment solutions An innovative mind behind gas purification technology. That is Cirmac.

Operating worldwide, specializing gas treatment systems for 30 years.

Cirmac operates in the field of gas treatment, gas production and biogas upgrading. Specialist and one of the leading suppliers of customized nitrogen packages for the on- and offshore oil & gas industry for the refineries and other industries.

Cirmac International bv

p64_cirmac_aarding.indd 1

[ tel ] +31 [0]55 534 0110

With 25 years of practical experience in biogas upgrading Cirmac provides three of the most effective and efficient gas treatment systems: membrane separation, PSA and the LP CooabÂŽ scrubbing system with the lowest methane emission in the world.

[ mail ] info@cirmac.com

[ web ] www.cirmac.com

02-04-12 11:21

Van Oord Offshore Wind Projects bv

sustainable supplier

Stationsweg 23 P.O. Box 458 4200 AL Gorinchem The Netherlands T +31 (0) 183 642750 F +31 (0) 183 642760 E area.owp@vanoord.com W www.vanoord.com

Van Oord is an international dredging and marine contractor with a dedicated business unit for the Offshore Wind Industry. Van Oord Offshore Wind Projects bv serves the wind sector as EPC (Engineering, Procurement and Construction) contractor and as dedicated subcontractor for installation activities for foundations and turbines, cabling and scour protection. Van Oord is well prepared to execute preparatory work activities such as design works and subcontract enquiries in the initial stage of the project before Financial Close. We are a leading EPC contractor in the offshore wind industry with projects such as Princess Amalia Offshore Wind Park, Belwind Phase I Offshore Wind Farm, Teesside (in progress), Dan Tysk (in progress), Gemini (in progress) and the installation of two meteo masts in the North Sea. Van Oord Offshore Wind Projects has its focus on the North West European market.

Van Oord invested in an innovative and advanced Offshore wind farm installation vessel called Aeolus. The Aeolus, available for operations in spring 2013, will be 139 m long, 38m wide and fitted with a crane capable of hoisting 900 tonnes at 30 metre radius.

Van Vliet Trucks Holland Parallelweg Zuid 215 2914 LE Nieuwerkerk a/d IJssel PO Box 3 2910 AA Nieuwerkerk a/d IJssel T +31 (0) 180 - 312644 F +31 (0) 180 - 319158 E info@vanvliet.com W www.vanvliet.com

A permanent stock of more than 1500 new and used trucks Since its establishment in 1953, Van Vliet Trucks has maintained the highest standards of quality. Van Vliet has become one of the largest suppliers in Europe.

The main reason for this is its permanent stock of more than 1500 trucks. Van Vliet has a comprehensive selection covering most categories, weights and specifications.

Van Vliet all over the world Over the years, we have gained a wealth of experience in the export market.

Tailor-made supplies

Over 90% of our products are exported to countries all over the world. Van

Van Vliet boasts comprehensive, modern garage facilities. Van Vliet trucks

Vliet employs export specialists too, so we can sort out language or customs

are made to measure, all to the highest standards of craftsmanship and

problems.

V

strictly according to the customer’s requirements and in accordance with the international quality standard ISO 9001.

Spare parts service A rapid spare parts service is a vital feature of our service package. We can always supply new or used parts for all current makes at short notice.

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 65

65

4/11/12 11:30 AM

Voestalpine Polynorm B.V.

sustainable supplier

Amersfoortseweg 9 3751 LJ Bunschoten PO Box 503 3750 GM Bunschoten T +31/33/298 9611 F +31/33/298 9043 E sales.ia@voestalpine.com W www.voestalpine.com/polynorm

Voestalpine Polynorm is specialised in the development and production of products and components for the Automotive industry and Industrial Applications markets, such as the construction industry and renewable energy markets. voestalpine Polynorm processes steel, stainless steel and aluminium sheet metal. Polynorm deep draws sheet metal on six press lines, assembles complex products and electro-coats parts. voestalpine Polynorm is able to support in every phase of the development- and production process through our knowledge and skills in the areas of project management, design, engineering, development and production. Voestalpine Polynorm has production facilities in the Netherlands and Germany.

Renewable energy voestalpine Polynorm is your partner for the development and production of components for renewable energy generation. Good examples are our solar collector trough ‘iWAN’ and the photovoltaic mounting system ‘iFIX’.

Please visit our website for more information.

Vryhof Anchors Rhijnspoor 255 2901 LB Capelle a/d yssel PO Box 109 2900 AC Capelle a/d yssel T +31 10 266 8900 F +31 10 266 8999 E vryhof@vryhof.com W www.vryhof.com

Vryhof Anchors provides drag anchors and related mooring equipment for larger floating structures, to the offshore energy industries as well as for offshore civil applications. Since the foundation of the company in the early seventies, Vryhof’s proven and trusted anchor designs have become the industry standard and are regarded as being best in both performance and handling. With primary focus on customer satisfaction, Vryhof Anchors is the preferred partner for mooring systems in all water depths and conditions.

V

66 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 66

4/11/12 11:30 AM

Weir Minerals Netherlands b.v.

Egtenrayseweg 9 5928 PH Venlo The Netherlands T +31-77-3895200 F +31-77-3824844 E weir@weirminerals.com W www.weirminerals.com

Weir Minerals Netherlands b.v designs and produces technologically high quality, industrial pumps. These pumps are utilised worldwide in important sectors of industry, such as mining, minerals processing, transport by pipelines, construction industry, waste water treatment and the (petro) chemical and process industry. They form the heart of the production processes of reputable international concerns. Together with our parent company, The Weir Group in Scotland, we belong to the top six of the world’s largest

For the power industry Weir Minerals Netherlands supplies the GEHO PD pumps

pump manufacturers.

for high density coal slurry transportation and disposal of ashes. The pumps handle various mixtures and ratios of fly ash, bed ash, bottom ash and other

The pumps are marketed under the brandnames:

by-products from flue gas desulphurisation systems.

• GEHO (piston and piston diaphragm pumps), • WARMAN (axial flow pumps), • ROTO-JET (high pressure pumps).

More than 90% of our production is exported worldwide. Quality and reliability are characteristic features of our products, which are mainly tailor made for the individual customer and weigh up to 80 tonnes each.

Willtéco P.O. Box 48 1723 ZG Noord-Scharwoude The Netherlands T +31 (0) 226 313 054 F +31 (0) 226 320 222 E info@willteco.com I www.willteco.com

WE DESIGN WE ENGINEER WE MANuFACTuRE WE REPAIR WE INSTALL WE COORDINATE Willtéco takes care of the complete technical support; from regular maintenance

One of the cornerstones of Willtéco’s service package is the supply of technical

through the supply of machine parts to technical solutions. Our team of special-

components and spare parts for the 24-hour industry. Through our excellence in

ists is always ready to carry out technical maintenance and to provide innovative

technical support our company grew into an organisation that works round the

solutions, 24 hours a day and seven days a week. It goes without saying that our

clock on design, production, engineering and installation of technically durable

company is SCC** certified and our staff works by those guidelines. We can now

solutions. Our specialists can be on the spot within 24 hours, to put innovative

also offer our services throughout Asia. Willtéch Asia operates from Singapore

solutions into practice with their decisive actions. We are in the right place for all

and will carry out our services with the same level of expertise that our custom-

your technical and mechanical problems. Of course, during all our activities we

ers are used to.

adhere to all the regulations and repair your equipment according to API specifi-

W

cations or according to DNV, ABS, or Lloyds regulations.

WE WILL SOLVE yOuR PROBLEM!

FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 67

67

4/11/12 11:30 AM

WLT Liquid & Gas Loading Technology B.V. Timmerfabriekstraat 19 2861 GW Bergambacht PO Box 24 2820 AA Stolwijk T +31 (0) 182-354440 F +31 (0) 182-354480 E info@wlt.nl W www. wlt.nl

Introduction WLT Liquid & Gas Loading Technology B.V. is a leading manufacturer of equipment for the transfer of (hazardous) liquids and gasses to and from ship, tanker, rail car and other storage means.

Full service

Sales department

WLT is a comprehensive service company. The products/services cover advice,

T +31 (0)182 354440

development, design and manufacture to installation, maintenance and over-

F +31 (0)182 354480

haul of loading arms (land and marine), hose towers, fall protection and loading

M +31 (0)6 12312534

platforms, tank equipment etc.

E aduiverman@wlt.nl W www.wlt.nl

Worldwide WLT operates on a global scale. The WLT products find their way to renowned producers of (petro) chemical liquids and gasses, at home and abroad.

WLT’s head office and manufacturing unit are located in Bergambacht, near Rotterdam.

For more information about our company and products, we invite you to visit our web-site www.wlt.nl.

Th. Wortelboer BV Sluisweg 9 6582 AG Heumen PO Box 5 6580 AA Malden T +31 (0)24 358 65 14 F +31 (0)24 358 70 79 E info@wortelboer.ws W www.wortelboer.ws

Th. Wortelboer BV is a Dutch manufacturer of stationary pipe end preparation machines for mainly the oil and gas industry. These heavy duty bevel machines are also used in offshore platform construction, pipe manufacturing, pipeline constructions and so on. Investing in a PBM machine is investing in quality.

A well prepared bevel decreases the change on failures during welding, and increases the quality of the welding process.

For cleaning pipe ends after bevelling, Th. Wortelboer BV introduced a hand held TPP polishing machine which enables the user to clean both inside and outside

W

The complete PBM series, starting with the PBM-4, now has a reach of ½” till 30”

of the pipe end at the same time.

(clamping reach 780 mm). The PBM-30 is capable to prepare a pipe with a 35 mm

More information can be found on www.wortelboer.ws

wall in one machining. Of course thicker walls are possible by machining the pipe several times after another.

Besides end preparation Th. Wortelboer BV is developing a stationary cutting- and bevelling machine for thick walled pipes. This new ABM machine is able to cut and bevel at the same time. Tough material and thick pipe walls are machined in seconds.

68 FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 68

4/11/12 11:30 AM

Zitron Droogdokstraat 6 7553 GW Hengelo PO Box 179 7550 AD, Hengelo T +31 (0)74 240 8273 F +31 (0) 74 240 8266 E alidus.wessels@zitron.nl W www.zitron.nl

Zitron Nederland B.V. offers their customers comprehensive ventilation packages, meeting the current and future needs of the Energy and boiler market.

Our capabilities include: • Design and sizing of fans and ventilation components.

• System pressure drop- and noise calculations including on site meaurements.

To ensure total compliance with customers specifications we have a policy of

• Detailed engineering of fans, fan foundations and components.

dealing with only approved suppliers for dampers, attenuators, electric motors

• Manufacturing of fans and sub-contracting of components.

and auxiliary equipment, as these are, beyond the fans, key elements in the

• Project management.

ventilation system.

• Transport to the site.

• Installation, commissioning and testing.

Further Zitron supplies a wide range of parts and carry out services also for

• Maintenance.

other brands.

• Trouble shooting.

The types of the fans are:

• Quality management.

- Variable Pitch Fans.

• Workshop balancing as well as balancing on site.

- Mixed Flow Fans.

• Aftermarket.

- Manual Adjustable Fans.

• Reverse Engineering.

• Refurbisment.

• Modernisation.

Colofon Association FME–CWM

Uitgave van / published by:

Editors:

Boerhaavelaan 40

Industrielinqs Pers en Platform

Elise Quaden

NL 2713 HX Zoetermeer

PO Box 12936

Mark Oosterveer

PO Box 190

NL 1100 AX Amsterdam

NL 2700 AD Zoetermeer

E info@industrielinqs.nl

Design:

T 0031 (0)793531294

W www.industrielinqs.nl

Gabriele Köbbemann

F 0031 (0)793531365

Studio-Online

E rce@fme.nl W www.fme.nl

Z FME ENERGy GuIDE 2012-2013

19-FME2012 profielen.indd 69

69

4/11/12 11:30 AM

B O O S T Y O U R B U S I N E S S AT O F F S H O R E E N E R G Y 2 0 1 2

400 EXHIBITORS, 6,500 VISITORS & 600 DELEGATES FROM OVER 30 NATIONALITIES ANNUAL EXHIBITION & CONFERENCE

23 & 24 OCTOBER 2012 AMSTERDAM RAI | THE NETHERLANDS

OFFSHORE OIL AND GAS E&P | TRANSPORT AND STORAGE | MARITIME SERVICES OFFSHORE WIND | OFFSHORE SUPPLY | OFFSHORE CONTRACTING | OFFSHORE VESSELS

OFFSHORE ENERGY CONFERENCE North Sea Oil and Gas | Frontier E&P | Renewable Energy: Wind, Wave and Tidal Keep up to date about the conference program, registration and speakers faculty at www.offshore-energy.biz

Created and produced by

Supported by

Media Partners:

W W W. O F F S H O R E - E N E R G Y. B I Z

p18_navingo.indd 1

02-04-12 11:21

Transport & Logistic systems

Utilities & Power supplies

Miscellaneous

Shipbuilding, Offshore Vessels

Rotary equipment

Process Control

Metal structures & supports

Mechanical automation

Maintenance

Engineering & Consultancy

x

Health, Safety, Environment equipment

Construction & Modification

x

Fluid control

Boilers, Heaters & Heat exchangers

Specialisations

Description on page

x

x

x

x

A A. Hak Beheer

20

A. de Jong Groep

20

Aarding Thermal Acoustics B.V.

21

AEG Power Solutions B.V.

21

AIB Vinรงotte Nederland B.V.

23

Anamet Europe

23

Applus RTD b.v.

24

Atlas Copco Compressors Nederland

24

x

x

x

x x

x

x

x x x x

x

x

x

B Bayards Aluminium Constructies B.V.

25

x

x

x

Machinefabriek Boessenkool B.V.

25

x

x

x

x

x

Bรถhler Lastechniek Groep Nederland B.V.

26

x

x

x

x

x

Breman Machinery

26

Bronswerk Heat Transfer B.V.

27

Brooks Instrument

27

x

x

x

x

x x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x x

x

x

x

C Cegelec B.V.

28

x

x

x

Cirmac International B.V.

28

x

x

x

Cofely Nederland N.V.

29

x

x

x

x

x

x

x x x

x

x

x

x

x

x

x

D D&C engineering

29

Discom B.V.

30

Doedijns Hydraulics

30

Duiker Mechanical B.V.

31

x

x

x x

x x

x

x

x

x

x

x

x

x

x

x

x

E Eaton Industries (Netherlands) B.V.

31

ELEQ

32

Elster-Instromet

32

x

Escher Process Modules B.V.

33

x

x

x x

x

x

x

x

FME ENERGY GUIDE 2012-2013

71-FME2012 matrix2.indd 71

71

4/5/12 1:10 PM

Miscellaneous

Utilities & Power supplies

Transport & Logistic systems

Shipbuilding, Offshore Vessels

Rotary equipment

Process Control

Metal structures & supports

Mechanical automation

Maintenance

Engineering & Consultancy

x

Health, Safety, Environment equipment

Construction & Modification

x

Fluid control

Boilers, Heaters & Heat exchangers

Specialisations

Description on page

x

F FIB IndustriĂŤle Bedrijven B.V.

33

x

G GEA Westfalia Separator Nederland

35

x

Geha B.V.

35

GGNI

38

x

Gispen International

38

x

Glynwed B.V.

39

x

Gouda Holland

39

GustoMSC

40

x

x

x

x

x x

x

x

x

x

x

x x

x x

x

x

x

x

x

x

x

H Hatenboer-Water b.v.Â

40

x

x

Heerema Fabrication Group B.V.

41

Hitec Power Protection B.V.

41

x

x

x

Hollandia

42

x

x

x

Howden Thomassen Compressors

42

x

x

Howden Netherlands B.V.

43

HP Valves Oldenzaal BV

43

Hubert Stavoren

44

Huisman

44

x

x

x

x

x

x

x x

x

x

x

x x

x

x x

x

x

I IHC Hydrohammer B.V.

45

IHC Merwede Offshore & Marine

45

IMT

46

x x

x x

x

x

x

x

x

x

x

x

J Jenbacher B.V.

72

47

x

FME ENERGY GUIDE 2012-2013

71-FME2012 matrix2.indd 72

4/5/12 1:10 PM

Miscellaneous

Utilities & Power supplies

Transport & Logistic systems

Shipbuilding, Offshore Vessels

Rotary equipment

Process Control

Metal structures & supports

Mechanical automation

Maintenance

Health, Safety, Environment equipment

Fluid control

Engineering & Consultancy

Construction & Modification

Boilers, Heaters & Heat exchangers

Specialisations

Description on page

K Keppel Verolme B.V.

47

x

Klip B.V.

48

x

Kooiman Apparatenbouw B.V.

48

x

Krohne Nederland

49

Kuehne + Nagel

49

x

x x

x

x

x

x

x

x

x

x x

x

x

L Lovink Enertech

50

x

M Machinefabriek Eerbeek b.v.

52

x

x

x

x

x

x

x

x

x

M&I-Labtech B.V.

50

Mechanische Industrie Menzing

51

Merford

51

x

52

x

Petrogas, gas-systems B.V.

53

x

Power Piping International B.V.

53

x

RebelGroup Advisory

54

x

x

De Regt Marine Cables b.v.

55

x

x

Royal Haskoning

55

x

x

x

x

x x

x x

x

x

x

x

x

x x

x

x

N NEM B.V.

x

x

P x

x

x

x

x

x

x

R

S Sarens Nederland

56

Saval Fire Protection

56

Schelde Exotech B.V.

57

SGS Nederland

57

Sinus Jevi Electric Heating B.V.

58

Smit Transformatoren B.V.

58

Stork Technical Services

59

Sulzer Turbo Services Rotterdam B.V.

59

x

x

x

x

x

x

x

x

x

x

x

x x x

x

x x x

x

x

x

x

x

x

x

x

x

x

x

x

FME ENERGY GUIDE 2012-2013

71-FME2012 matrix2.indd 73

x

73

4/5/12 1:10 PM

Miscellaneous

Utilities & Power supplies

Transport & Logistic systems

Shipbuilding, Offshore Vessels

Rotary equipment

Process Control

Metal structures & supports

Mechanical automation

Maintenance

Health, Safety, Environment equipment

Fluid control

Engineering & Consultancy

Construction & Modification

Boilers, Heaters & Heat exchangers

Specialisations

Description on page

T Tss4U B.V.

60

Machinefabriek Tuin

60

TKF (BV Twentsche Kabelfabriek)

61

x

x

x

x x

x

x

x

x x

x x

x

x

V Van Beest B.V.

61

x

Van Dam B.V.

62

x

Van Heck

62

Van Oord Offshore Wind Projects B.V.

65

Van Vliet Trucks Holland B.V.

65

Voestalpine Polynorm

66

Varco BJ B.V.

63

Verebus Engineering B.V.

63

Vryhof Anchors

66

x

x

x

x x

x

x

x

x

x

x

x x x

x

x

x

x

x

x

x x

x

W Weir Minerals Netherlands

67

Wilteco B.V.

67

WLT Liquid & Gas Loading Technology B.V.

68

Th. Wortelboer BV

68

x x x x

x

x

x

x

x

x

x

x

x

x

x

x

x x

x

x

Z Zitron

74

69

x

x

x

x

x

x

FME ENERGY GUIDE 2012-2013

71-FME2012 matrix2.indd 74

4/5/12 1:10 PM

Power Piping International BV is a manufacturer and supplier of a complete range of pipe supporting for all types of piping systems.The manufacturing facility is strategically located in Moergestel, The Netherlands directly on the A58 highway between the ports of Rotterdam and Antwerp.

We are specialised in the manufacture and supply of insulated pipe supports for low temperature piping systems and insulated pipesupports for high temperature piping systems. Our Quality Management System has been audited and meets the ISO9001:2000 standards.

• • • •

POWERFOAM™ HD PUF cryogenic pipe supports POWERFOAM™ HD PUF cryogenic anchors Timtherm® hot pipe supports Permali pipe supports

A modern manufacturing facility, a knowledgeable engineering department, years of experience and an innovative team support our activities.

Short communication lines guarantee a quick and responsive supplier.

Power Piping International BV, P.O. Box 464, 5000 AL Tilburg, The Netherlands Ind. Estate De Sonman, De Sonman 15, 5066 GJ Moergestel, The Netherlands Telephone: +31 13 595 29 23, Fax: +31 13 595 29 24, E-mail: info@powerpiping.nl www.powerpiping.nl

p75_powerpiping.indd p71_powerpiping.indd 1 1

02-04-12 11:21 09-03-2011 10:20:39

p76_willteco.indd 1

02-04-12 11:20