Dub Details ENGINE: 1.4-litre HK/ABD hybrid four-cylinder 8v with GF camshaft, VW Motorsport valve cover and inlet, KWL Motorsport pulley, Weber Alpha throttle bodies, smoothed engine and gearbox, Omex 500 ECU. Arunfab throttle body flip adaptor, dizzy delete, inlet vacuum delete, custom Mk3 style mounts, custom exhaust and thermostat pipe delete. Jenvey 150mm trumpets, stainless four-branch manifold, custom alloy radiator, Vibratechnic engine mounts, GTi fuel tank and pump, Weber Alpha fuel pressure regulator CHASSIS: 8x14 and 8.5x14” custom Mad’ins with 155/55 R14 Federals, Glynfab 15mm a side narrowed wishbones, Arunfab 25mm a side narrowed rear axle, 10mm a side narrowed driveshafts, S1 Suspension custom low air struts, Still Static G23 top mounts, Wheeliams track rod flip kit, HRP bias pedal box, Willwood master cylinders, 6n2 polo GTi front and rear brakes, full length braided brake lines, Arunfab drop plates and Clio Williams chrome wheel nuts EXTERIOR: Arunfab 2" wishbone raise, Glynfab 2" chassis leg notches, Captive top mount bolts, Captive bumper bolts, Glynfab Captive wing toppers, engine raised 2" and tilted, aerial delete, front and rear wiper delete, bonnet vent delete, delocked door handles NOS, debadged tailgate, all unused holes welded up 400ish, square front lights and grille. 1976 Rocco front wings, chrome bumpers, window chrome, rear window surrounds, front panel, front indicators, rear lights, rear lock, clear glass and metal petrol cap. Arunfab stainless filler neck, Glyn fab steering strengthening bracket. Sprayed inside and out by Chad at JH Pro paint INTERIOR: Momo Jackie Stewart steering wheel, Recaro ST replica seats, 1976 Rocco seat belts, door cards, handbrake and seat belts. 1975 Golf gear gaiter. Smoothed boot cards, Arunfab stalk and ignition delete, switches modded to run stalks, Autopilot v2 behind dash, all interior holes welded up, wiring and air lines run through sills, fuel and brake lines run through sills, hidden compressor and tank, hidden battery in rear 1/4s, Glynfab floor work SHOUT: Arun, Glyn, Josh, Nic, Leah, Carl, Chez, Adam Calvert, Micheal Dean, Jordan Fox, Tom Taylor, Ben (Polomon), Marshall, Bryan (Stocks), Stefan Clarke, Jon and Chad at JH Pro Paint, Oliver Willis, Rob (Germany) and the Scirocco Register
if I sold both my Scirocco projects and the parts I had collected I could afford to buy it,” explained Winston. “This '79 was a much more soild base to work from and only needed minor niggles to finish it off. Lucky for me a Scirocco Register forum member bought both cars and most my parts.” A couple of grand later Winston was the proud owner of a T-reg 1.6 automatic that actually ran... sometimes: “I tried to get it through its MoT but it cut out on its return and it missed Edition 38.” Job one was to get the damn thing running, to this end the 1600 was binned and an unsuspecting 1300 was corralled and dropped December 2017
59