Polyamide pipe line 85bar, ø12,7mm-1/2" - HP pipe
MADE IN ITALY
IT.0022
IT.0023
HP polyamide pipe, ø12,7mm - 1/2",rods of 3000mm (max. pressure 85bar with 23°C temperature)
HP polyamide pipe, ø12,7mm - 1/2", roll of 50m (max. pressure 85bar with 23°C temperature)
IT.0441 Tube cutter, for polyamide pipe ø2-12mm
IMPORTANT If the pressurised water flow exceeds 11l/min a primary line of ø12,7mm - 1/2" should be installed with branching to the line and couplings of ø9,5x5mm - 3/8" or 9,6x5mm - 3/8". Max. pressure 100bar with 23°C temperature
CLA.PAS012
ZX.0523-12
Rubberized stainless steel clamp, to fix polyamide pipe ø12,7mm - 1/2"
Ball valve kit G1/2" F-F, with quick couplings ø12,7mm - 1/2" for HP line shutoff
in packs of 100pcs
Couplings IT.0348
IT.0349
IT.0350
Start quick fitting, made of nickeled brass, 1/2” M - ø12,7mm - 1/2”
Straight pipe connection quick fitting, made of nickeled brass, ø12,7mm - 1/2”
Elbow pipe connection quick fitting, made of nickeled brass, ø12,7mm - 1/2”
IT.0351
IT.0352
IT.0353
IT.0354
Tee pipe connection quick fitting, made of nickeled brass, ø12,7mm - 1/2”
Tee pipe connection quick fitting, made of nickeled brass, to connect pipe ø12,7mm - 1/2” to a ø9,6mm - 3/8”
Straight pipe connection quick fitting, made of nickeled brass, to connect pipe ø12,7mm 1/2” to a ø9,6mm - 3/8”
End of line cap, in nickel-plated brass, for quick coupling ø12,7mm - 1/2"
Copyright© Idrobase Group. All rights reserved.
509