CONTROL SYSTEM THERMOSTATS - TIMERS - HUMIDISTATS IT.0255
IT.0103
IDRO COLD Thermostat remote control Ideal for controlling and maintaining the desired temperature in a closed environment. Complete with temperature detecting sensor
IDRO COLD TIME thermostat remote control + timer The thermostat/timer device is designed to monitor and maintain the desired temperature in a given environment with a simple setting operation. Easy to use, works with all resistive sensors type NTC10K. Can be used both for heating (differential greater than zero) and cooling (differential less than zero). The output device can be controlled by means of a programmable timer in the control unit
Remote pause/work control - IDRO TIME: The IDRO TIME remote control for fogging systems is powered by 230V-50Hz electric current, it allows system pause and work times to be programmed and displayed on the screen. It is very simple to program by untrained users, too, for maximum user-friendliness. It can also be used as a manual timer
ELE.0001
IT.0105
IT.0106
IDRO TIME PLUS pause/work remote control: the remote control is powered by 230V-50Hz electric current, it allows to program the system working week on a day by day basis by setting work and pause times. It is also possible to ensure fog system control during product delivery, by connecting an electric float to the equipment designed to turn off the system should the product run out
IDRO UMI Humidistat remote control This remote control is ideal to control and keep the desired degree of humidity in a closed environment. It can only be used with humidity detection sensors with 4-20mA current output signal, 0,5%-10% relative humidity triggering differential. It is very simple to program by untrained users, too, for maximum user-friendliness
IDRO UMI TIME pause/work + humidistat remote control This pause/work + humidistat remote control controls and maintains the humidity range in a closed area (humidistat), with the possibility of adjusting the progressive intake of humidity (pause/work timer). It offers the twofold advantage of higher precision in reaching the desired parameters while avoiding peak humidity levels which can be caused by delayed sensor response times. It can only be used with humidity sensors with a 4-20mA current output signal, differential triggering rate of 0,5% to 10% relative humidity. Easy to program even by untrained users
IT.0256
IT.0137-20
IDRO UMI COLD TIME humidistat + thermostat + timer remote control This device allows temperature and humidity data to be detected in any environment through detection sensors so that actions can be taken to cool the environment. Acting on the control unit settings you can decide when to activate the cooling device to change the climate conditions within the selected environment
Humidity probe - IDRO PROBE The humidity probe PERFECT PROBE is ideal for industrial applications. The output current signal is 4-20mA. Technical specifications: • Length: 20m • Humidity measurement range: 15 - 90% rh • Precision: ±5% • Response time: 60 sec constant conditions • Protection rating: IP54
CLUB DEL MISTING
IT.0104
470
Copyright© Idrobase Group. All rights reserved.