2019 Pre-Season Aftermarket Hay & Forage Catalogue

2019 PRE-SEASON Aftermarket Hay & Forage Catalogue

S T N E T N CO

03 04

17 18

29 30

43 44

05 06 10

19 20 28

31 40 41

45 46

Baler Pre-Season Program

Round Baler Inspection

John Deere Net Wrap

Oil Promotions

Hay & Forage Parts

Parts OnSite™ Program

John Deere Attachments

TransTank International Silage Applicators

Genuine Kuhn Parts

Kuhn Clearance

Option AgParts

Option AgParts: Lankota Parts

Option AgParts: New Holland Parts

Option AgParts: CASEIH Parts

Option AgParts: Kuhn Parts

Hutcheon & Pearce doesn’t just stop at parts… we’ve got you covered!

Hutcheon & Pearce are committed to keeping your tractor operating to its full potential. There’s nothing more important to us than keeping you up and running, especially during critical times.

We carry everything you need, from maintenance products to equipment attachments, tools and more.

Hutcheon & Pearce offer the right advice and support to get the job done.

It’s the Hutcheon & Pearce difference.

2

6, 7 & 8000 Series Servicing

6, 7 & 8000 Series Inspections

Maintenance Contracts

TECSight

BALER PRE-SEASON PROGRAM Hutcheon and Pearce offer the value of choice when it comes to the maintenance of your Baler.

OPTION OPTION

1 2

Full Inspection and Repair: Let our John Deere trained Hutcheon & Pearce Technician inspect your machine and provide a full inspection and report. Receive 10% off all parts, 12 month parts warranty, finance options and our H&P Guarantee when we complete the work.

Over the Counter Parts Only Program: Receive our pre-season parts program offer of 5% off orders over $1,500. This includes genuine Kuhn and Option AgParts for most makes and models of balers, mowers and rakes. Get your pre-season order in today.

THE MORE YOU BUY, THE MORE YOU SAVE.

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

3

RICE6

DP FIXE

350

ST inc G

$

*

ional r t i d d No a ut fee fo call o ections! insp

n o i t c e p s n i r

e l a b d n u o r

10

DISCOUNT % PARTS WHEN FITTED BY US

#

Are you ready to make hay while the sun shines?

Have your baler serviced and rectify any issues before the baling season starts. We will carry out a pre-season baler service, inspection and lubrication on your baler for a flat fee and report on any repairs required.

 Check operation and calibrate all sensors

Your time is precious, leave it to us to make sure your machinery is operating at its peak.

 On-site inspection

H&P Inspection and Service includes:  Thoroughly lubricate baler

 Report on any required repairs

Fixed price includes:  Full inspection check  Written report on

our findings

 Dust net wrap rubber feed roll with

H&P Inspection Guarantee:

talcum powder  Lubricate all chains  Check condition of all sprockets  Replace gear case oil  Check condition and operation of main drive slip clutch  Check all belt splice pins for breakage and wear  Inspect condition of belts  Check/adjust and lubricate wheel bearings

If you break down during harvest, our H&P Inspection Guarantee Includes: • Priority in-season repair assistance • No freight charges on overnight delivery from Melbourne on all required parts • No travel charges (includes km and travel labour time) – only pay for the repair labour • No afterhours parts or service call out fees • H&P Inspection Guarantee only applies if the recommended pre-season repairs where completed by us.

Conditions6 - Inspection must be completed by 31st August 2019 - Repairs will be completed in a mutually agreed time frame.

- Parts and labour for recommended repairs not included - Customers must have an up to date and current account.

- All recommended service repairs are completed using genuine John Deere parts.

-Travel for on-site inspection is included in price (up to 150kms from the nearest Hutcheon & Pearce location).

DO YOU HAVE OTHER HAY EQUIPMENT ON FARM THAT REQUIRES AN INSPECTION? WE CAN INSPECT IT! TALK TO YOUR LOCAL H&P SERVICE TEAM TODAY!

4

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019. Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

P A R W ERE NET

E D N H O J

RELIABLE & CONSISTENT PERFORMANCE + PROTECTION + LENGTH

=

LOWER COST VS. NON GENUINE ALTERNATIVES

WRAP UP BALING WORK IN A HURRY. John Deere technology saves time, money and reduces waste. Whether it’s the added strength and capacity of Xtranet™ netwrap or the unique protection of CoverEdge™ Netwrap – John Deere Netwrap is what you need to make the most of your silage, hay or straw baling requirements.

John Deere CoverEdge™

Leading-edge protection for your bales.

CoverEdge™ Netwrap goes over the edge of the bale, producing perfect bales and full protection. Elimination of shoulders means better shaped bales and weather protection, easier handling and improved silage production.

Benefits: • Reliability and consistency; for trouble free baling • Better weather proof protection; with bale edges covered there’s less opportunity for rain and moisture to penetrate the bale • Reduced crop losses; smooth edges hold crops tight to the bale surface, making storage easier and neater.

• Easier handling • The John Deere CoverEdge™ comes with cores featuring plastic core inserts at the end of the core. The plastic core inserts provide increased marketability and compatibility for John Deere CoverEdge™ in competitive balers that utilize a roll support system.

• Length

John Deere XtraNet™

Goes even further to please

XtraNet™ is the new generation of high-strength ZEBRA® net and thanks to the easy-view roll pattern, it’s also easier to load rolls and identify the un-roll direction of your bales. Combined with the new Bale+™ manufacturing technology, that uses a special mix of advanced raw materials, John Deere‘s XtraNet™ provides: Benefits: - Reliable and consistent performance: trouble free bailing experience - Improved efficiency: a roll of XtraNet 4200 makes 1.4 times more bales than standard 3000m net rolls. Less roll changes means less downtime and higher output - Protection; net covers the full width of the bale for better crop protection. Your bale resists weather and can store and transport better.

- Length - The long length of the 4200m means two (2) rolls can provide enough netwrap to bale all day, regardless of the round baler you use or the crop you harvest.

John Deere Baling Twine™ - - - - - - -

Designed in Australia specifically for HIGH DENSITY Balers Proven in the harsh Australian conditions for the past two seasons Runs perfectly through all HIGH DENSITY Balers Offers high output & ease of running Soft, low friction twine causing less ware on knotters Maxmise your Baler output Exclusive to John Deere

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

5

.

R E T T E B . AND

R E T T BE

Better and better. It isn’t just about improving our products. It’s about the right oil for the right job. New formulation Torq-Gard™, and Plus-50 II™ with extended drain interval^ capabilities. Better and better respectively.

Hutcheon & Pearce have all the maintenance options you need, no matter what you are running or your budget. Ask today about the engine oil that’s right for you and your equipment. ^ 500 hour drain interval applies to John Deere diesel engines when the following criteria are met: 1. Engine is equipped with an extended drain interval oil pan. 2. Machine operates with Plus-50 II engine oil API CK-4. 3. Machine uses a John Deere engine oil filter. 4. Machine uses only ultra low sulphur diesel fuel.

Visit your local Hutcheon & Pearce Dealer to find out more.

6

PLUS-50™ II PREMIUM ENGINE OIL Plus-50™ II is a premium Engine oil and is the next generation of superior John Deere engine oil. Plus-50™ II protects up to 500 hours^, when used with John Deere filters in John Deere engines, saving you money on maintenance while giving you added peace of mind.

Applications l For use in heavy-duty off-road applications, on-road trucks, marine engines, natural gas engines, pickups, and automobiles l Backwards compatible for use in all legacy diesel engine applications where Plus-50™ may have been applied l For use in John Deere IT4 engines and all diesel engines requiring API CJ-4 oil Key Advantages – Exceeds API CJ-4 performance level for diesel engines & API SM performance level for petrol engines – Formulated specifically to inhibit oxidation, deposits, corrosion, and wear with superior soot control – Reduces maintenance costs and downtime – Provides maximum sludge and varnish control – Excellent low-temperature fluidity reduces engine wear in cold weather – Drain intervals may be extended up to 500 hours when used with John Deere filters in John Deere engines – Low ash technology to support diesel particulate filter service life

Packs AvailableT CP6657 CP6658 CP6659 CP6660

5L 20L 205L 1000L

TPrices shown in Australian dollars

including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

Specifications - SAE 15W-40, API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, SM, SL, SJ, ACEA E9, E7, JASO GH-2

HY-GARD™ TRANSMISSON OIL

Contact your local Hutcheon & Pearce for the most up-to-date pricing

Hy-Gard™ is a hydraulic and transmission oil formulated to protect heavily-loaded gears, wet brakes, wet clutches, and hydraulic systems.

Applications l Suitable for a wide range of operating conditions l Transmissions and differential units with immersed wet brakes l Gearboxes with hydraulic brakes l Gearboxes with hydraulic drive systems Key Advantages l Multi-viscosity formula for a wide range of operating temperatures l Prevents wear on high-torque heavy-loaded gears and bearings l Prevents wear and corrosion in hydraulic pumps l Provides proper friction for wet brakes and clutches, reducing slippage, wear and chatter l Prevents final drive wear due to anti-wear additives for gears Specifications SAE 10W-30, ISO 46-68, JDM J20C, JDQ 95 WEAR TEST TPrices shown in Australian dollars including GST. Images are for illustrative

purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

Packs AvailableT CP1565 CP1566 CP1567 CP2103

5L 20L 205L 1000L

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

7

THERMA-GARD™ COOLANT

Contact your local Hutcheon & Pearce for the most up-to-date pricing

Therma-Gard™ is a high-performance anti-freeze/summer coolant designed to meet and exceed today’s heavy-duty engine requirements.

Applications l Engineered for heavy-duty applications, where automotive grade products do not provide effective protection against corrosion l Developed specifically for John Deere engines l Formulated with corrosion inhibitors to minimise the formation of deposits Key Advantages l 6 years/6,000-hour service life to reduce downtime and lower operating costs l 20% longer service intervals which translates to savings l High thermal and oxidative stability required by engines equipped with cooled exhaust gas recirculation (EGR) l Provides excellent protection against corrosion and deposits, extends water pump life and prevents cylinder liner cavitation

Packs Available ^ CP6175 CP6176 CP6177

5L Pre-Mix 10L Pre-Mix 20L Pre-Mix

^Prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019.

Prices subject to change after this period.

TORQ-GARD™ ENGINE OIL Torq-Gard™ is specially developed for four stroke diesel and petrol engines, where standard drain intervals are required.

Applications l Suitable for latest or older generation engines l Also suitable for turbo or non-turbo engines l For use in diesel or petrol engines

LOWEST PRICES

Key Advantages l Contains a high-performance additive system for cleaner pistons and reduced wear l Excellent low-temperature fluidity, providing instant lubrication and engine protection l Effective acid neutralising properties help to reduce corrosion l Acceptable to change from Torq-Gard™ to Plus-50™ at any given oil or filter change Packs Available^ CP5135 CP5136 CP5137 CP5260

8

5L 20L 205L 1000L

Specifications SAE 15W-40, API CI-4/CH-4/CG-4/CF-4/SL, ACEA E7, E5, B3, A3 ^Prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019.

Prices subject to change after this period.

*Prices shown in Australian dollars including GST. Images are for illustrative purposes only.

GL-5 GEAR LUBRICANT Packs Available^ RRP CP1226 CP1228

85W-140 20L 80W-90 20L

^Prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

Contact your local Hutcheon & Pearce for the most up-to-date pricing

VEHICLE CARE PACK

l l l l l l l l

Quick Shine Detailer Wheel and Tyre Cleaner Ultra Guard Leather Care Ultra Gloss Polishing Wax Engine Cleaner All-Purpose Degreaser Classic Glass Cleaner Carpet Stain Remover

ULTIMATE SHED PACK l l l l l l l l

Penetrating Oil John Deere Heavy-Duty Wipes All-Purpose Cleaner Hand Cleaner All-Purpose Degreaser Engine Cleaner Classic Glass Cleaner Brake and Parts Cleaner

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

9

s t r a p e g a or

f & y ha

Contact your local Hutcheon & Pearce for the most up-to-date pricing

TINES FOR JOHN DEERE RAKES NUMBER DESCRIPTION AE47389 A-AE47389 A-257SE

APPLICATION

PRICE* WHEN FITTED BY US*

TYPE

54, 64, 74, 75, 650, 652, 660, 662, 670, 671, John Deere 672, and 673 54, 64, 74, 650, 652, 660, 662, 670, 671, 672, Rubber Mtd Rake Tooth A&I Products and 673 350, 851, 858 (SN <87200), 894 (SN Rake Tooth* A&I Products <37900), 896 (SN <13430) Rubber Tooth

A&I Products part number is identified by A-

THE RIGHT PART. THE RIGHT PRICE. Genuine John Deere Parts Engineered and tested for its exact application, a genuine John Deere part is your best choice for performance and reliability.

10

John Deere Reman When you need an OEM quality solution at a price you can afford, John Deere Reman will get your machine up and running in no time.

It’s not rebuilt, it’s your machine reborn.

Option AgParts An economical repair option for your equipment. Whether you have an older John Deere machine or a mixed fleet, A&I Products are supplied by Option AgParts to offer a variety of products for numerous applications.

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019. Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

Contact your local Hutcheon & Pearce for the most up-to-date pricing

TS R A P E G A R HAY & FO PRE-CUT BALER CHAIN Diagram 569 (MegaTooth™ Pickup)

A

B

1 Upper drive

TY26350

3

Starter roll drive

Chain and Cable Lubricant • Penetrates rapidly • Ideal for all types of exposed chains • Reduces friction and wear • Resists rust and corrosion • Product is free of ozone-depleting chlorofluorocarbons (CFCs) • Foam action reduces chain throw-off

4 Clutch to idler

5 Idler to pickup

2 Lower drive

NUMBER DESCRIPTION

APPLICATION TYPE

PRICE*

WHEN FITTED BY US*

Pickup Drive (Regular Pickup): AFH208830*

449, 459(S), 559, 569, 440E, 450M, 550M, and 560M

50-72

John Deere

A-AFH208830

449, 459, 459 Standard, 559, and 569

50-72

A&I Products

50–111

John Deere

Clutch to Idler (MegaTooth™ Pickup): AFH205493*

569

Idler to Pickup (MegaTooth™ Pickup): AFH208828

569

50–74

John Deere

A-AFH208828

569

50–74

A&I Products

Clutch to Rotor (MegaWide™ Pickup): AFH205492

449, 459(S), 469(S)(PR), 559(S), 569(S)(PR), 440E, 450M, 460M/R, 550M, and 560M/R

50–102

John Deere

A-AFH205492

449, 459, 459S, 469, 469P, 469S, 559, 559S, 569, 569P, and 469S

50–102

A&I Products

Rotor to Pickup (MegaWide™ Pickup): AFH208473

449, 459(S), 469(S), 559(S), 569, 440E, 450M, 460M, 550M, and 560M

50–79

John Deere

A-AFH208473

449, 459, 459S, 469, 469S, 559, 559S, 569, and 469S

50–79

A&I Products

AFH205377

469PR, 569PR, 460R, and 560R

50–89

John Deere

A-AFH205377

459P and 569P

50–89

A&I Products

AFH206114*

469(S), 569(S), 460M, and 560M

80–158

John Deere

A-AFH206114

469, 469S, 569, and 569S

80–158

A&I Products

AFH206112*

469PR, 569PR, 460R, and 560R

80H–158

John Deere

A-AFH206112

569P and 469P

80H–158

A&I Products

AFH208831

449, 459(S), 469(S)(PR), 559(S), 569(S)(PR), 440E, 450E/M, 460M/R, 550M, and 560M/R

60H–42

John Deere

A-AFH208831

449, 459, 459 Standard, 459S, 469, 469P, 469S, 559, 559S, 569, 569S, and 569P

60H–42

A&I Products

AFH206115*

469, 569, 460M, and 560M

80–64

John Deere

A-AFH206115

469 and 569

80–64

A&I Products

AFH206113*

469PR, 569PR, 460R, and 560R

80H–64

John Deere

A-AFH206113

469P and 569P

80H–64

A&I Products

Upper Drive:

Starter Roll Drive:

Lower Drive:

​*Diamond Chain®: Designs each component and has a rigorous quality-control system.

Heat-treated using carburizing furnaces set to precise temperatures.

Uses proprietary shot-peening machinery developed and custom-made to ensure consistent intensity and coverage of components during the shot-peening process.

Uses both a proprietary lubrication formula and hot-dip application process on all lubricated roller chains.

All chain is preloaded to approximate the recommended maximum loading during usage. This firmly seats pins and bushings and helps eliminate any initial elongation.

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

11

HAY &

S T R A P E G FORA

Contact your local Hutcheon & Pearce for the most up-to-date pricing

ROLLER CHAIN NUMBER

DESCRIPTION

APPLICATION

TYPE

A-RC60HIMP A-RC60HX50IMP A-CL60HIMP A-OL60HIMP A-RC80HIMP A-CL80HIMP A-OL80HIMP

Various Various Various Various Various Various Various

60 H Roller Chain, 10ft 60 H Roller Chain, 50ft 60 HConn. Link 60 H Offset Link 80 H Roller Chain, 10ft 80 HConn. Link 80 H Offset Link

A&I Proucts A&I Proucts A&I Proucts A&I Proucts A&I Proucts A&I Proucts A&I Proucts

PRICE* WHEN FITTED BY US*

DIAMOND CHAIN® Made from raw materials that meet exacting standards for metal grade, mechanical properties, carbon and alloy content, Diamond Chains are heat-treated at a precise temperature and undergo rigorous quality-control testing. They include: l Industry leading wear life and the lowest total cost of ownership in the roller chain industry l Firmly seated pins and bushing that eliminates any initial elongation l Consistent intensity and coverage during the shot peen process to ensure consistent surface stress and increased fatigue resistance l A proprietary lubrication formula and hot dip application process to maximize surface retention, enhance corrosion protection and extend wear life.

Visit your local Hutcheon & Pearce dealer for more information.

DIAMONDTOUGH™ BALER BELTS PRICE* WHEN FITTED BY US*

NUMBER DESCRIPTION

APPLICATION

AE74209 AE74210 AE74177 AE74178 A-1011646 A-1011647

458, 458S, 459, 459S, 558, 559, and 559S 458, 458S, 459, 459S, 558, 559, and 559S 468, 468S, 469, 469S, 469P, 568, 569, and 569P 468, 468S, 469, 469S, 469P, 568, 569, and 569P

DiamondTough Short DiamondTough Long DiamondTough Long DiamondTough Long Short Long

DIAMONDTOUGH™ PRO BALER BELTS NUMBER DESCRIPTION

APPLICATION

AFH212598 AFH212599 AFH210848 AFH210849

458, 558, 459, and 559 458, 558, 459, and 559 468, 568, 469, and 569 468, 568, 469, and 569

DiamondTough Pro Short DiamondTough Pro Long DiamondTough Pro Short DiamondTough Pro Long

PRICE* WHEN FITTED BY US*

BELT LACES AND PINS NUMBER DESCRIPTION AE53297 E70966 AE53298 A-1701432 E86147

12

APPLICATION

PRICE* WHEN FITTED BY US*

330, 335, 375, 410, 430, 435, 500, 510, 530, and 535 Clipper Lace Pin 330, 335, 375, 430, 435, 530, and 535 Mato-Plate Type Lace 6, 7, 8, and 9 Series Balers Lacing, Mato Heavy Plate 14 Segment -7" AE53298 Mato-Plate Type Pin 6, 7, 8, and 9 Series balers Clipper Lace

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

HAY

S T R A P E G & FORA

P I T H C TE

Contact your local Hutcheon & Pearce for the most up-to-date pricing

Replacing belt pins before they’re worn or broken saves time and reduces wear on your equipment. We recommend checking pins after every 500–1,000 bales.

PICKUP TEETH NUMBER

DESCRIPTION

Round baler with regular pickup: 6-in., 5-Coil with AlE74678 len-Head Bolt A-E74678

Baler Tooth*

E79475

7 1/4-in.

A-E79475

Baler Tooth*

Round baler with MegaWide™ pickup: E90881 Left-Hand A-E90881 Tooth, Pickup, LH Outer Middle, MegaTough™ FH304576 Square Tooth (Set of 10 Teeth, no Hardware) Tooth, Pickup (Square A-AFH202304 Wire); Set of 4 Teeth w/ Hardware E90880 Right-Hand A-E90880 Tooth, Pickup, RH Outer

APPLICATION Fits 330, 335, 375, 430, 435, 530, and 535 model balers 330, 335 (SN <915000), 375 (SN <915000), 430 (SN 710001>), 435 (SN <921150), 530 (SN 710001>), and 535 (SN <921939) Fits 330, 335, 385, 435, 6, 7, 8, and 9 Series Round Balers 330, 335 (SN 915001>), 375 (SN 915001>), 385, 430 (Long tooth pickup only), 435 (SN 921151>), 530 (Long tooth pickup only), 535 (SN 921940>), 6, 7, and 8 Series Round Balers

TYPE

PRICE* WHEN FITTED BY US*

John Deere

A&I Products

John Deere

A&I Products

Fits 6, 7, 8, and 9 Series Round Balers 6, 7, 8, and 9 Series Round Balers

John Deere A&I Products

6, 7, 8, 9, and 0 Series Round Balers

John Deere

6, 7, 8, and 9 Series Round Balers

A&I Products

Fits 6, 7, 8, and 9 Series Round Balers 6, 7, 8, and 9 Series Round Balers

John Deere A&I Products

BALER NET WRAP COMPONENTS NUMBER DESCRIPTION

AE70677 E94524 A-B32K

Bar (No.8 Roll-Narrow Wrap Drive) Bar (No.8 Roll-Wide Surf Wrap Drive) Bar (Lower Surf Wrap) Knife (Narrow Surface Wrap) Brush (Scraper Narrow) V-Belt V-Belt

AFH203937

Surface Wrap Brake

AFH212426 AFH212427 E94247 E133004

APPLICATION

TYPE

4 x 8, 4 x 9, and 7 Series Round Balers

John Deere

5 x 8, 5 x 9, and 7 Series Round Balers

John Deere

5 x 8, 5 x 9, and 7 Series Round Balers

John Deere

4 x 8 and 4 x 9 Series Round Balers

John Deere

4 x 8, 4 x 9, and 7 Series Round Balers 7, 8, and 9 Series Round Balers 7, 8, and 9 Series Round Balers 435, 535, 6,7, 8, and 9 Series Round Balers, L330 and L340 Large Square Balers

John Deere John Deere A&I Product

PRICE* WHEN FITTED BY US*

John Deere

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

13

HAY

Contact your local Hutcheon & Pearce for the most up-to-date pricing

S T R A P E G & FORA

BALER PICKUP STRIPPERS NUMBER DESCRIPTION

APPLICATION

TYPE

330, 335, 375, 430, 435, 530, and 535 Model Balers Center Stripper (Wide 435, 535, 540, 545, 550, and 6 Series CC32669 Pickup) Round Balers FH311772 Center Stripper 8 and 9 Series Round Balers Stripper, Center; Regular & 385, 630A, 630B, 640A, 640B, 645A, A-FH311772 MegaWide Pickup* 645B, 6, 7, 8, and 9 Series Round Balers FH311994 Inside Stripper (Rock Ejector) 7, 8, and 9 Series Round Balers Stripper, Rock Ejector; A-FH311994 7, 8, and 9 Series Round Balers MegaWide Pickup FH311995 Outside Stripper 6, 7, 8, and 9 Series Round Balers Stripper, Outer; MegaWide A-FH311995 6, 7, 8, and 9 Series Round Balers Pickup E88848

Stripper*

PRICE* WHEN FITTED BY US*

John Deere John Deere John Deere A&I Products John Deere A&I Products John Deere A&I Products

JOHN DEERE ROUND BALER DRIVELINES AND CLUTCHES NUMBER

DESCRIPTION

U-Joint with Shaft, CAT4, AFH213887 540 RPM U-Joint with Shaft & Shield, AFH207722 FRONT H, 540RPM A-DT535906N Front Half CV w/ Female A-DT535921N Front Half CV w /Female T AFH206427

Pickup Slip Clutch

A-AE56776

Pickup Slip Clutch

AFH217179

U-Joint with Shaft & Shield (CAT5 540 RPM)

A-AE74294N AFH217180 A-AE74295N

14

John Deere Baler Driveline 2480 CV; 540 RPM U-Joint with Shaft & Shield (CAT5 1,000 RPM) John Deere Baler Driveline 2480 CV; 1,000 RPM

APPLICATION

TYPE

335, 375, 385, 6, and 7 Series Round Balers

John Deere

8 and 9 Series Round Balers

John Deere

7 Series Round Balers 468, 568, and 7 Series Round Balers 435, 535, 6, 7, 8, and 9 Series Round Balers 435, 535, 6, 7, 8, and 9 Series Round Balers 336, 346, 347, 348, 468 Sqaure Balers, and 435, 535, 6, and 7 Series Round Balers 435, 535, 6, and 7 Series Round Balers 435, 535, 6, and 7 Series Round Balers 435, 535, 6, and 7 Series Round Balers

A&I Products A&I Products

PRICE* WHEN FITTED BY US*

John Deere A&I Products John Deere A&I Products John Deere A&I Products

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

HAY &

S T R A P E G FORA

ROTARY MOWER CONDITIONER CUTTERBAR PARTS

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NUMBER

DESCRIPTION

APPLICATION

TYPE

AE70632 A-AE70632 E93226 E93222 E98137 A-E98137

Disk*** Disk*** Accelerator* Accelerator* Accelerator (Left-Hand End)** Accelerator, CW (Clockwise)** Accelerator (Right-Hand End)** Accelerator, CCW (Counterclockwise)**

990, 994, 995, and 500R

990, 994, 995, and 500R 990, 994, 995, and 500R

John Deere A&I Products John Deere John Deere John Deere A&I Products

990, 994, 995, and 500R

John Deere

990, 994, 995, and 500R

A&I Products

E98138 A-E98138 03M7372

Accelerator Bolt***

E63527

Accelerator Nut***

FH313555 E80242

AE71036 A-AE71036

Knife Bolt*** Knife Lock Nut*** Kit, Blade Bolt, and Nut (6 Bolts & 6 Nuts)*** Cap (Bolt Protector)*** Cap, Wear (2 Pcs./Pack)*** Driver Kit LH (Shear Hub)*** Kit, Driver Input; w/ Capscrew*** Driver Kit RH (Shear Hub)*** Driver Kit; Disk Shear Hub***

AFH213234

Guard, Disk, HD – Center

A-AE71254 FH303250 A-FH303250 AE71035 A-AE71035

​​

324, 328, 331, 381, 388, 990, 994, 995, and 500R 324, 328, 331, 381, 388, 990, 994, 995, and 500R 625, 630, 990, 994, 995, 500R 990, 994, 995, and 500R

PRICE* WHEN FITTED BY US*

John Deere John Deere John Deere John Deere

990, 994, and 995

A&I Products

990, 994, 995, and 500R 990, 994, 995, and 500R

John Deere A&I Products John Deere

990, 994, 995, and 500R

A&I Products

990, 994, 995, and 500R 500R 530, 535, 625, 630, 635, 730, 735, 830, 835, 946, 956, 994, 995, and 500R

John Deere A&I Products John Deere

*Fits models 910, 915, 920, 925, 930, 935, 945, and 955. ** Fits models 525, 530, 535, 730, 735, 910, 915, 916, 920, 925, 926, 930, 935, 936, 945, 946, 955, and 956. *** Fits models 525, 530, 535, 625, 630, 635, 730, 735, 830, 835, 910, 915, 916, 920, 925, 926, 930, 935, 936, 945, 946, 955, and 956.

MOWER CONDITIONER KNIVES NUMBER

DESCRIPTION

FH323281

Standard, counterclockwise*

FH323282

Standard, clockwise*

PRICE* WHEN FITTED BY US*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

15

HAY

Contact your local Hutcheon & Pearce for the most up-to-date pricing

S T R A P E G & FORA

SICKLE PARTS FOR MOWER/CONDITIONERS, AND AUGER PLATFORMS NUMBER DESCRIPTION E76370

Overserrated Dura-Cut, Chrome**

E76371

Underserrated Dura-Cut, Chrome**

APPLICATION

TYPE

120, 1214, 1219, 130, 135, 1600A, 183, 220, 290, 300A, 78, 710, 720, 820 120, 1214, 1219, 130, 135, 1600A, 183, 220, 300A, 350, 450, 3700, 78, 710, 720, 820

PRICE* WHEN FITTED BY US*

John Deere John Deere

SMALL SQUARE BALER PARTS NUMBER DESCRIPTION

APPLICATION

TYPE

E41833 A-E41833 E17777 E42088 AFH202537 AFH202538 AE50593 AFH205877 AE70115

466 and 468 466 and 468 466 466 328, 338, and 348 328, 338, and 348 328,338 and 348 328, 338, 348, and 468 348,466 and 468

John Deere A&I Products John Deere John Deere John Deere John Deere John Deere John Deere John Deere

Baler Tooth* Baler Tooth Stationary Knife Plungerhead Knife Needle (Twine with Guide) Needle (Wire) Finger (Feeder)* Finger (Tucker) Knotter Repair Kit*

PRICE* WHEN FITTED BY US*

PRIORITY BALER BELT PROMISE. Bring in your baler belt to be repaired and we will fix it on the spot.

IS PRICE T L PER BE JOIN!

$70

^

inc GST + parts

^ Price shown in Australian dollars including GST. Images are for illustrative purposes only. Price is per belt join. After hours and call out fees apply. Offer is valid from September 1st 2019 - December 31st 2019.

Contact your local Hutcheon & Pearce Dealer for more information

16

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

M A R ™ G O R P E T S ONSI

PART

MAXIMISE YOUR UPTIME WITH A PARTS ONSITETM CABINET No matter how close your Hutcheon & Pearce dealership is, your shed is a lot closer. That’s why John Deere offers Parts OnSite – so you can stock parts at your place and get back to work sooner. Your local Hutcheon & Pearce branch is the key to keep you rolling - we’ll keep you stocked with the high-wear and maintenance parts you need for your business. After you use a part, just reorder and restock. It’s that simple.

Stay organised. Stay productive.

What better way to stock your parts than with a sturdy Parts OnSite cabinet? It’ll keep you organized and it looks great in your shed.

What are the benefits of Parts OnSite? ’Round the clock accessibility — parts are available at your place, when you need them, 24/7.

JDParts.com also lets you place orders through to us 24 hours a day, so you can stay on top of your inventory. Alternatively, you can contact your local branch and we’d be happy to come out and check your cabinet stock.

Dealer support – ask how we can work together to have the appropriate parts for your business always on-hand.

More uptime – with your parts inventory close at hand, you can grab a part and get back to work in no time.

We want to make it easy for you to get the parts you need for your business.

Call in and see your local Hutcheon & Pearce and ask about Parts OnSite.

Parts OnSite Cabinet Program Terms & Conditions • First order minimum $3000 + GST • Maximum of $1500 of oil on first order.

• Cabinet remains an asset of Hutcheon & Pearce.

• The customer is liable for any damage to the OnSite Cabinet & may be charged accordingly.

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

17

S T N E M H C A T T EERE A

D N H O J

WITH JOHN DEERE ATTACHMENTS

Round Balers

Cornstalk compression rack

Variable core valve Control hydraulic pressure for easier starts, even in diffcult conditions. This kit is for balers equipped with BaleTrak Pro™ and BaleTrak Plus™ monitors.

Feed tough, abrasive cornstalk windrows into your baler with greater ease while protecting your equipment. This hard-working rack contains a solid steel shaft that’s heavy enough to help compact stalks and leaves against the pickup. For use with cornstalks on 5-foot-wide balers only. Change out when baling other crops.

Part number and applications: BE32257: (5’ wide balers) 6, 7, 8 and 9 Series

Corncob fller plates

Part numbers and applications: BE23827: 466, 566, 467, 567, 468, 568, 469, and 569 round balers BE24159: 457, 557, 458, 558, 459 and 559 round balers BE32298: 459 Standard with Electric Twine round balers

Keep threshed corncobs moving smoothly into the baler without snags.

Available for MegaWide pickups, these plates will improve pickup tooth and rotor tine reliability.

Part number and applications: BE32310: 6, 7, 8, and 9 Series

Side sheet enhancement kit ADD MORE muscle for punishing field conditions. With this kit, you’ll get a solid way to protect your round baler where you need it most – inside the walls. Made with rugged carbon-manganese steel that withstands extremely abrasive crop and field conditions, it delivers a dramatic increase in your baler’s service life.

Part numbers and applications: BE32101: 468, 468 silage special and 568 round balers BE32141: 467, 467 silage special and 567 round balers

Handheld Moisture Testers CONTACT AL YOUR LOC ARCE P & E HUTCHEON OR MORE DEALER F TION INFORMA

18

Keep an eye on your bales’ moisture with these extra-rugged probes, which give an accurate digital readout for moisture and temperature.

SW16136 - Hay moisture tester (18-in. probe)

Part numbers and applications: SW007320 - Low-moisture hay tester (20-in. probe)

SW16326 - Hay moisture tester (32-in. probe) SW007321 - Low-moisture hay tester (10-in. probe)

SILAGE APPLICATORS

Remote Controlled

Silage Applications • • • • • •

Tough UV Stabilised tank 7.5L/min 60psi Delavan 12v pump NEW! Remote on/off switch Ideal for mounting to a baler Covers 1 metre with 2 non-dip nozzles - green nozzles Regulator fitted to pressure adjustment

SILAGE APPLICATOR NOZZLE: Silage Applicator boom Single Nozzle Complete Silage Applicator boom Double Nozzle Complete

SILAGE APPLICATOR

100L Silage Applicator with 2 Nozzle Boom 200L Silage Applicator with 2 Nozzle Boom

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

19

ARTS P N H U K E

Contact your local Hutcheon & Pearce for the most up-to-date pricing

GENUIN

PICK UP TINE FIXINGS

NUMBER

MODEL

DESCRIPTION

Z4400510

All models

Length: 170 mm Width: 66 mm Screw: 80060853 Ø 5,2 mm Weight: 0,20 kg Pack Nut: 80200817 of 10 tines Washer: 80200842

TYPE

PRICE WHEN FITTED BY US*

Kuhn

PICK UP GUIDE NUMBER MODEL

Z4079970

Z4079980

Z4202490

Z4523560

20

VB 2160 (2009 / 2010), VB 2190 (2009 / 2010), VBP 2160 (2009) VBP 2190 (2190), FBP 2135 (2009 / 2010 / 2011), KUHN Bio (2009 / 2010), LSB 1270 (2009 / 2010 / 2011A), LSB 1290 (2009 / 2010 / 2011A) VB 2160 (2009 / 2010 / 2011), VB 2190 (2009 / 2010 / 2011), FB 2125 (2010), FB 2135 (2009 / 2011), VBP 2160 (2009 / 2011), VBP 2190 (2009 / 2011), FBP 2135 (2010 / 2011), LSB 870 (2009 / 2010 / 2011 / 2012 / 2013), LSB 890 (2009 / 2010 / 2011 / 2012 / 2013) VB 2160 (2009 / 2010 / 2011 / 2012 / 2013 / 2014), VB 2190 (2009 / 2010 / 2011 / 2012 / 2013 / 2014), VB 2255 (2015 / 2016) VB 2260 (2015 / 2016), VB 2285 (2015 / 2016) VB 2290 (2015 / 2016), VBP 2160 (2009), VBP 2190 (2009) "VB 2160 (2010 / 2011 / 2012 / 2013 / 2014), VB 2190 (2010 / 2011 / 2012 / 2013 / 2014), VB 2255 (2015 / 2016), VB 2260 (2015 / 2016) VB 2265 (2016), VB 2285 (2015 / 2016), VB 2290 (2015 / 2016) VB 2295 (2016), FB 3135 (2015 / 2016 / 2017), FB 2130 (2011 / 2015) FB 2135 (2011 / 2012 / 2014 / 2015), FB 3130 (2015 / 2016 / 2017) FBP 2135 (2012 / 2014 / 2015), FBP 3135 (2015 / 2016) VBP 2160 (2011 / 2012 / 2013 / 2014), VBP 2190 (2011 / 2012 / 2013 / 2014), VBP 2265 (2016 / 2017), I-BIO (2010 / 2011 / 2012 / 2013 / 2014 / 2015), I-BIO+ (2015 / 2016), LSB 870 (2015 / 2016) LSB 890D (2014 / 2015 / 2016)

FIXINGS

DESCRIPTION

TYPE

Screw, on plastic 225 x 260, Width: 45 mm. guide: 80080618, Weight: 1 kg Screw: 80130610

Kuhn

207 x 260, Width: 45 mm, Weight: 1 kg, Thinner extremity than Z4000150

Screw, on plastic guide: 80080618, Screw: 80130610

Kuhn

179 x 260, Width: 45 mm, Weight: 1 kg

Screw: 80190612

Kuhn

113 x 198, Width: 45 mm, Weight: 1 kg

Screw (M6 x 16): 80190617, Screw Kuhn (M6 x 12): 80130612

PRICE WHEN FITTED BY US*

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

ARTS P N H U K E

Contact your local Hutcheon & Pearce for the most up-to-date pricing

GENUIN

PICK UP GUIDE CONTINUED...

NUMBER MODEL Z4523560

Z4000150

Z4012710

LSB 1270 (2011 / 2012 / 2013 / 2014 / 2015 / 2016), LSB 1270D (2016) LSB 1270DX (2016), LSB 1290 (2011 / 2012 / 2013 / 2014) LSB 1290D (2014 / 2015 / 2016), LSB 1290ID (2014 / 2015 / 2016) VB 2160 (2009 / 2010 / 2011 / 2012 / 2013 / 2014), VB 2190 (2009 / 2010 / 2011 / 2012 / 2013 / 2014), VB 2255 (2015 / 2016), VB 2260 (2015 / 2016), VB 2285 (2015 / 2016), VB 2290 (2015 / 2016) FB 119 (2010 / 2012), VBP 2160 (2009), VBP 2190 (2009) FB 2121 (2010)

DESCRIPTION

FIXINGS

TYPE

113 x 198, Width: 45 mm, Weight: 1 kg

Screw (M6 x 16): 80190617, Screw Kuhn (M6 x 12): 80130612

207 x 260, Width: 45 mm, Weight: 1 kg

Screw: 80190612

Kuhn

265 x 290, Width: 45 mm, Weight: 1,10 kg

Screw, on plastic guide: 80080618, Screw: 80130610

Kuhn

PRICE WHEN FITTED BY US*

ROTOR - KNIFE NUMBER MODEL

DESCRIPTION

TYPE

Z4002170

VB 2160 (2009 / 2010), VB 2190 (2009 / 2010), FB 2135 270 x 265; Thickness: (2009) VBP 2160 (2009), VBP 2190 (2009), FBP 2135 (2010 5 mm, Weight: 1,46 kg 4 / 2011) KUHN Bio (2009 / 2010) knives per kit

Kuhn

Z4002310

VB 2160 (2009 / 2010 / 2011), VB 2190 (2009 / 2010 / 2011) 290 x 280, Thickness: 5 FB 2135 (2011 / 2012), VBP 2160 (2009), VBP 2190 (2009) mm, Weight: 1,64 kg

Kuhn

Z4079940

Z4533760

Z4545590

Z5063900

VB 2160 (2009 / 2010), VB 2190 (2009 / 2010), FB 2125 (2010), FB 2135 (2009 / 2011), VBP 2160 (2009), VBP 2190 (2009), FBP 2135 (2010/ 2011) KUHN Bio (2009 / 2010), LSB 870 (2009 / 2010 / 2011 / 2012 / 2013) LSB 890 (2009 / 2010 / 2011 / 2012 / 2013) VB 2160 (2010 - 2011 - 2012 - 2013 - 2014), VB 2190 (2010 - 2011 - 2012 - 2013 - 2014), FB 2130 (2011 - 2015), FB 2135 (2011 - 2012 - 2014) VBP 2160 (2011 - 2012 - 2013 - 2014), VBP 2190 (2011 - 2012 - 2013 - 2014) FBP 2135 (2012 - 2014), I-Bio (2010 - 2011 - 2012 - 2013 - 2014 - 2015) VB 2255 (2015 - 2016), VB 2260 (2015 - 2016), VB 2265 (2016) VB 2285 (2015 - 2016), VB 2290 (2015 - 2016), VB 2295 (2016), FB 2135 (2015), FB 3130 (2015 - 2016 - 2017), FB 3135 (2015 - 2016 - 2017) VBP 2265 (2016 - 2017), VBP 2295 (2016 - 2017), FBP 2135 (2015) FBP 3135 (2015) I-Bio+ (2015 - 2016), LSB 870 (2015 - 2016), LSB 890D (2014 - 2015 - 2016) LSB 1270 (2009 - 2010 - 2011 - 2012 - 2013 - 2014 - 2015 - 2016) LSB 1270D (2016), LSB 1270 DX (11-2016), LSB 1290 (2009 - 2010 - 2011 - 2012 - 2013 - 2014), LSB 1290D (2014 - 2015 - 2016), LSB 1290ID (2014 - 2015 - 2016)

PRICE WHEN FITTED BY US*

254 x 315 Thickness: 5 mm, Weight: 1,29 kg 4 knives Kuhn per kit

273 x 348 Thickness: 5 mm , Weight: 1,33 kg 4 knives Kuhn per kit

289 x 344 Thickness: 5 mm, Weight: 1,54 kg 4 knives Kuhn per kit

232 x 302, Thickness: 5 mm, Weight: 1,36 kg 4 knives per kit

Kuhn

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

21

Contact your local Hutcheon & Pearce for the most up-to-date pricing

ARTS P N H U K GENUINE ROTOR - KNIFE CONTINUED...

NUMBER MODEL Z5066560

Z4002440

Z4204190

Z4002840

DESCRIPTION

LSB 1270 (2009 - 2010 - 2011 - 2012 - 2013 - 2014 -2015 - 2016) LSB 1270D (2016), LSB 1270 DX (11-2016), LSB 1290 200 x 308 Thickness: 5 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) LSB 1290D (2014 mm Weight: 1 kg - 2015 - 2016), LSB 1290ID (2014 - 2015 - 2016) Hardened Knife, 254 x 315 VB 2160 (2009 - 2010), VB 2190 (2009 - 2010), FB 2125 Thickness: 5 mm, Weight: (2010) FB 2135 (2009 - 2011), VBP 2160 (2009), VBP 2190 1,41 kg 4 knives per kit (2009), FBP (2135 (2010 - 2011) Coating: Tungsten carbide Hardened Knife, 270 x 265 VB 2160 (2009 - 2010) VB 2190 (2009 - 2010) FB 2135 Thickness: 5 mm, Weight: (2009) FBP 2135 (2010 - 2011) 1,35 kg Coating: Tungsten carbide "Super Silage" Knife , 255 VB 2160 (2009 - 2010) VB 2190 (2009 - 2010), FB 2135 x 265, Thickness: 5 mm, (2009) VBP 2160 (2009), VBP 2190 (2009), FBP 2135 (2010 Weight: 1,36 kg 4 knives 2011) KUHN Bio (2009 - 2010) per kit

TYPE

PRICE WHEN FITTED BY US*

Kuhn

Kuhn

Kuhn

Kuhn

BELTS NUMBER MODEL

DESCRIPTION

TYPE

Z4200010z

All models

Pin Length: 200 mm Ø 3,5 mm Pack of 5 pins

Kuhn

80375000

All models

Repair Set; Pack of 5 pins and 10 clips

Kuhn

Z4202330

Z4202640

83100009

Z4500330

Z4202580

Z4202650

22

VB 2190 (2009 - 2010 - 2011 - 2012 - 2013 - 2014), VB 2285 (2015 - 2016) VB 2290 (2015 - 2016), VB 2295 (2016), VBP 2190 (2009 - 2011 - 2012 - 2013 - 2014), VBP 2295 (2016 2017) VB 2160 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) VB 2255 (2015 - 2016), VB 2260 (2015 - 2016), VB 2265 (2016) VB 2295 (2016), VBP 2160 (2009 - 2011 - 2012 - 2013 - 2014) VBP 2265 (2016 - 2017), VBP 2295 (2016 - 2017) VB 2160 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) VB 2255 (2015 - 2016), VB 2260 (2015 - 2016) VB 2265 (2016), VBP 2160 (2009 - 2011 - 2012 - 2013 - 2014) VBP 2265 (2016 2017)

PRICE WHEN FITTED BY US*

Belt «Multigrip» Length: 12 m, Width: 215 mm, Kuhn Thickness: 6,5 mm With fixing Belt «Multigrip» singular profile , Length: 10,7 m, Kuhn Width: 215 mm, Thickness: 6,5 mm With fixing Endless belt , Length: 10,7 m, Width: 215 mm, Thick- Kuhn ness: 6,8 mm

VB 2190 (2009 - 2010 - 2011 - 2012 - 2013 - 2014), VB 2285 Endless belt , Length: 12 m, (2015 - 2016) VB 2290 (2015 - 2016), VB 2295 (2016) VBP Width: 215 mm, Thickness: Kuhn 2190 (2009 - 2011 - 2012 - 2013 - 2014) 6,8 mm Standard belt 2 profiles , VB 2190 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) VB 2285 Length: 12 m, Width: 215 (2015 - 2016) VB 2290 (2015 - 2016) VB 2295 (2016) VBP Kuhn mm, Thickness: 6 mm With 2190 (2009 - 2011 - 2012 - 2013 - 2014) fixing VB 2160 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) VB 2255 Standard belt 2 profiles, (2015 - 2016) VB 2260 (2015 - 2016) VB 2265 (2016) VB 2295 Length: 10,7 m, Width: 215 Kuhn (2016) VBP 2160 (2009 - 2011 - 2012 - 2013 - 2014) VBP mm, Thickness: 6 mm With 2265 (2016 - 2017) VBP 2295 (2016 - 2017) fixing *All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

ARTS P N H U K E

Contact your local Hutcheon & Pearce for the most up-to-date pricing

GENUIN

BELTS CONTINUED...

NUMBER Z4201930

Z4538000

MODEL VB 2190 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) VB 2285 (2015 - 2016), VB 2290 (2015 - 2016) VB 2295 (2016), VBP 2190 (2009 - 2011 - 2012 - 2013 - 2014) VBP 2295 (2016 2017) VB 2160 (2009 - 2010 - 2011 - 2012 - 2013 - 2014) VB 2255 (2015 - 2016), VB 2260 (2015 - 2016) VB 2265 (2016), VBP 2160 (2009 - 2011 - 2012 - 2013 - 2014) VBP 2265 (2016 2017)

DESCRIPTION

TYPE

PRICE

WHEN FITTED BY US*

Belts set endless , Kit belts set endless 12 m, With Kuhn fixing Belts set endless , Kit belts set endless 10,7 m, With Kuhn fixing

HAY & SILAGE MAKING - TINES GF/ GRS NUMBER 58505210

58561900

57609000

58740600 (Left Turning)

58740700 ( Right Turning)

MODEL

DESCRIPTION

FIXINGS

Screw: 80061452, GF 4 - 4 SP; GF 22 SP; GF 23; GF 440 M Open coil end ( packaging Nut: 80201430, > 800350; GF 452 M - P - T > 803200; 8 ), Length (Z) 362 mm, Ø Tine bracket: GF 440 P - T >805100 9.5 mm 58525700, Washer: 80251435 Screw: 80061449, GF 440 M - P 760001> ; GF 440 T Nut: 80201430, Straight ( packaging 8 ), 760001 > 970000; GF 452 M - P - T Washer: 80251435, Length 360 mm, Ø 9.5 mm 802001 > T0000 ; GF 671 800001 > In case of defl ector: 58725400 "GF 22 NP - NT / GF 5001 THA 800001 > 950000 GF 440 SRP - T / GF 4000 M - T U0001 > GF 3701 / GF 4201 MH Screw: 80061449, 940001 > GF 4000 M - T U0001 > GF Closed coil end (package Nut: 80201430, 4201 MH 910001 > GF 5000 M - T - H of 6 ), Length 357 mm, Ø Washer: 80251435, - HN - MH - MHA > 920000 GF 5001 9.5 mm In case of deflecMH - MHA - VTH - T 920001 > GF tor: 58725400 6000 MH T0001 > S0380 GF 6301 MH - MHO 910000 > GF 7000 T / GF 7001 T R0001 > GRS 21 GRS 24 GF 5001 TH / GF 5002 THA / GF 5202 Asymmetric closed coil end A0001 > GF 5801 MH - MHO / GF 5902 (package of 6), 58740600 Screw 80061448, A0001 > GF 6401 MH - MHO - T / GF (tine turning left), Nut 80201447, 6502 960001 > GF 7501 / GF 7601 / GF 58740700 (tine turning Washer 80251435, 7702 / GF 7802 970001 > GF 8501 MH right), Long length 357 mm, Deflector: - MHO - TO - T / GF 8702 920001 > Short length 335 mm, Ø 58848200 GF 10601 / GF 10802 / GF 13002 / GF 9.5 mm 17002 A0001 > GF 5001 TH / GF 5002 THA / GF 5202 Asymmetric closed coil end A0001 > GF 5801 MH - MHO / GF 5902 (package of 6), 58740600 Screw 80061448, A0001 > GF 6401 MH - MHO - T / GF (tine turning left), Nut 80201447, 6502 960001 > GF 7501 / GF 7601 / GF 58740700 (tine turning Washer 80251435, 7702 / GF 7802 970001 > GF 8501 MH right), Long length 357 mm, Deflector: - MHO - TO - T / GF 8702 920001 > Short length 335 mm, Ø 58848200 GF 10601 / GF 10802 / GF 13002 / GF 9.5 mm 17002 A0001 >

TYPE

PRICE WHEN FITTED BY US*

Kuhn

Kuhn

Kuhn

Kuhn

Kuhn

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

23

ARTS P N H U K E

Contact your local Hutcheon & Pearce for the most up-to-date pricing

GENUIN

HAY & SILAGE MAKING - TINES GF/ GRS CONTINUED...

NUMBER 57644010

MODEL "GRS 25, GRS 25 N

DESCRIPTION

FIXINGS

TYPE

"Angled (package of 6), Length 475 mm, Ø 9.5 mm

Screw: 80061279, Nut: 57702200, Washer: 80251336, Kuhn Tine bracket: 57644200

DESCRIPTION

FIXINGS

PRICE WHEN FITTED BY US*

TINES - GA NUMBER

57502000

57701700

57720200

57518500

K8013670

K8011670

24

MODEL

Angled ( package of 7) GA 230 P - SP > 791000, GA 280 P - SP Length (Z) 417 mm Ø 8.5 > 791000 , GA 300 SP - M - N mm GA 230 G > T0350, GA 280 P - SP 791001 > GA 280 > 950200, GA 280 GM > T0285, GA 300 NM 790501 >, GA 300 N 790001 > 801250, GA 300 G - GM VR 810001 >, GA 301 G - GM / GA 402 / M - 7 - N X0001 > 950300, GA 300 GT V0001 > S0200, GA 3201 G - GM 950001 > GA 300 GT S0201 > 960580, GA 3200 GT 970001 >, GA 3501 S 920001 >, GA 381 GM - GT U0001 > 929999, GA 4101 GM - GT 930000 > 949999, GA 682, GA 732, GA 7301 910001 >, GA 7302 DL 940001 > C0000

GA 4501 GM 920001 > 960000, GA 7302 DL > 939999, GA 8221 A0001 >

GA 3501 GM 940000 > , GA 4100 TH A0001 >, GA 4311 GM / GA 4511 GM 970001 >, GA 4101 GM - GTH 950001 >, GA 4120 TH / GA 4121 GM - GTH A0001 >, GA 4321 GM A0001 > GA 4521 GM - GTH A0001 > GA 6000 > 979999, GA 6501 A0001 > "GA 6000 / GA 6002, GA 6520 / GA 6522 / GA 6622 A0001 > GA 7000 DL / GA 7302 DL, GA 7822 / GA 7922 / GA 7932 A0001 > GA 9032 / GA 9321 / GA 15021 / GA 15031 A0001 > GA 13131 / GA 15131 A0001 >

TYPE

PRICE WHEN FITTED BY US*

Screw: 80061280, Nut: 80201240, Washer: 80251331, Kuhn Tine bracket: 57502100, Washer: 56312900

Screw: 80061281, Nut: 80201230, Angled ( package of 7) Washer: 80251340, Kuhn Length 460 mm, Ø 8.5 mm Tine bracket: 57530300, Washer: 80281252 Screw: 80061265, Nut: 80201213, Angled ( Package of 5 ) Washer: 80251336, Kuhn Length 520 mm, Ø 9.5 mm Tine bracket: 57717410, Washer: 80251331 Screw: 80061280, Nut: 80201230, Straight ( Package of 4) , Washer: 80251336, Kuhn Length 577 mm, Ø 9.5 mm Tine bracket: 57717410, Washer: 80281252

Angled Long ( Package of 6) , Length 577 mm, Ø 9.5 mm

Screw: 80061265, Nut: 80201230, Washer: 80251336, Kuhn Tine bracket: 57717410, Washer: 80281252

Angled Long ( Package of 6) , Length 577 mm, Ø 10.5 mm

Screw: 80061265, Nut: 80201230, Washer: 80251336, Kuhn Tine bracket: 57717410, Washer: 80251331

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

ARTS P N H U K E

Contact your local Hutcheon & Pearce for the most up-to-date pricing

GENUIN

MOWER BLADES GMD / FC NUMBER

MODEL

DESCRIPTION

FIXINGS

TYPE

56150000

GMD 33/44/55/ 66/77 FC 44/55

Flat standard, 96 x 75 x 40 x 3 - Ø 16.2 mm (packaging 25)

Screw: 56150100, Standard Nut: 80201062 discs

56150010

GMD 33/44/55/ 66/77 FC 44/55

Flat reinforced , 96 x 75 x 45 x 3,5 - Ø Screw: 56150100, Standard 16.2 mm (packaging 25) Nut: 80201062 discs

56151200 (Left)

GMD 33/44/55/ 66/77 FC 44/55

Angled standard - 93 x 75 x 43 x 3 - Screw: 56150100, Standard Ø 16.2 mm Nut: 80201062 discs

56151300 (Right)

33/44/55/ 66/77 FC 44/55

Angled standard - 93 x 75 x 43 x 3 - Screw: 56150100, Standard Ø 16.2 mm Nut: 80201062 discs

56151210 (Left)

GMD 33/44/55/ 66/77 FC 44/55

Angled reinforced, 95 x 75 x 45 x 3,5 Screw: 56150100, Standard - Ø 16.2 mm (packaging 25) Nut: 80201062 discs

56151310 (Right)

GMD 33/44/55/ 66/77 FC 44/55

Angled reinforced 95 x 75 x 45 x 3,5 - Screw: 56150100, Standard Ø 16.2 mm (packaging 25) Nut: 80201062 discs

56451200 (Left)

GMD 33/44/55/66/77 GMD 500S/600/700/800

Angled heavy duty 121 x 101 x 45 x 3,5 - Ø 18.2 mm (packaging 25)

56451300 (Right)

GMD 33/44/55/66/77 GMD 500S/600/700/800

Angled heavy duty 121 x 101 x 45 x 3,5 - Ø 18.2 mm (packaging 25)

56450000

GMD 33/44/55/66/77 GMD 500S/600/700/800

Humped long 128 x 102 x 35 x 4 - Ø 18.5 mm (packaging 25)

55903210 (Left)

GMD 400/500/600/ 602 602 F/700/702/702 F/ 800/801/802/802F/902 FC 240 P/ 280 P/280 F/FC Angled 107 x 87 x 45 x 4 - Ø 18.2 mm Screw: 56115800, Standard 200/202/243/250/ 283/ 300/ (packaging 25) Nut: 80201262 Scheiben 301/ 302/303/353/3000/3500/ 4000Alterna 400/500 FC 813/883

55903310 (Right)

GMD 400/500/600/ 602 602 F/700/702/702 F/ 800/801/802/802F/902 FC 240 P/ 280 P/280 F/FC Angled 107 x 87 x 45 x 4 - Ø 18.2 mm Screw: 56115800, Standard 200/202/243/250/ 283/ 300/ (packaging 25) Nut: 80201262 Scheiben 301/ 302/303/353/3000/3500/ 4000Alterna 400/500 FC 813/883

PRICE

WHEN FITTED

BY US*

Reinforced Screw: 56115800, and heavy Nut: 80201262 duty discs and HD model Reinforced Screw: 56115800, and heavy Nut: 80201262 duty discs and HD model Reinforced Screw: 56115800, and heavy Nut: 80201262 duty discs and HD model

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

25

Contact your local Hutcheon & Pearce for the most up-to-date pricing

ARTS P N H U K GENUINE MOWER BLADES GMD / FC CONTINUED...

NUMBER

56840000 (Left)

55921600

MODEL GMD 400/500/600/ 602 602 F/700/702/702 F/ 800/801/802/802F/902 FC 240 P/ 280 P/280 F/FC 200/202/243/250/ 283/ 300/ 301/ 302/303/353/3000/3500/ 4000Alterna 400/500 FC 813/883 GMD 400/500/600/ 602 602 F/700/702/702 F/ 800/801/802/802F/902 FC 240 P/ 280 P/280 F/FC 200/202/243/250/ 283/ 300/ 301/ 302/303/353/3000/3500/ 4000Alterna 400/500 FC 813/883

DESCRIPTION

FIXINGS

TYPE

Humped short 112 x 87 x 37 x 4 - Ø 18.5 mm (packaging 25)

Screw: 56115800, Standard Nut: 80201262 Scheiben

Flat 107 x 87 x 45 x 4 - Ø 18.2 mm (packaging 25)

Screw: 56115800, Standard Nut: 80201262 Scheiben

K6807550 (Left)

GMD / FC

Reinforced ‘’5mm’’ 119 x 94 x 45 x 5 - Screw: K6807730, Standard Ø 20.5 mm (package of 20) Nut: 80201265 Scheiben

K6807540

GMD / FC

Reinforced ‘’5mm’’ 119 x 94 x 45 x 5 - Screw: K6807730, Standard Ø 20.5 mm (package of 20) Nut: 80201265 Scheiben

PRICE

WHEN FITTED

BY US*

PRICE

WHEN FITTED

BY US*

MOWER BLADES FAST-FIT NUMBER MODEL

DESCRIPTION

FIXINGS

TYPE

K6801410 (Left) K6801420 (Right) K6802970 (Left) K6802980 (Right) K6804710 (Left)

Fast-Fit, 105 x 84 x 47 x 4 - Ø 20.5 mm (Package of 24) Fast-Fit, 105 x 84 x 47 x 4 - Ø 20.5 mm (Package of 24) Lowered blade Fast-Fit, 105 x 84 x 47 x 4 - Ø 20.5 mm (Package of 25) Lowered blade Fast-Fit, 105 x 84 x 47 x 4 - Ø 20.5 mm (Package of 25) Fast-Fit 2, 116 x 95 x 47 x 4 - Ø 20.5 mm (Package of 25)

Screw: K6801011, Nut: 80201262 Screw: K6801011, Nut: 80201262 Screw: K6801011, Nut: 80201262 Screw: K6801011, Nut: 80201262 Screw: K6801011, Nut: 80201262

Standard discs Standard discs Standard discs Standard discs Standard discs

Fast-Fit 2, 116 x 95 x 47 x 4 - Ø 20.5 mm (Package of 25)

Screw: K6801011, Standard Nut: 80201262 discs

Lowered blade Fast Fit 2, 116 x 95 x 47 x 4 - Ø 20.5 mm (Package of 25) Lowered blade Fast Fit 2, 116 x 95 x 47 x 4 - Ø 20.5 mm (Package of 25) Reinforced ‘’5mm’’, 119 x 94 x 45 x 5 - Ø 20.5 mm (Package of 24) Reinforced ‘’5mm’’, 119 x 94 x 45 x 5 - Ø 20.5 mm (Package of 24)

Screw: K6801011, Nut: 80201262 Screw: K6801011, Nut: 80201262 Screw: K6807720, Nut: 80201265 Screw: K6807720, Nut: 80201265

K6804720 (Right) K6804730 (Left) K6804740 (Right) K6807550 (Left) K6807540 (Right)

26

GMD / FC GMD / FC GMD / FC GMD / FC GMD / FC GMD / FC GMD / FC GMD / FC GMD / FC GMD / FC

Standard discs Standard discs Standard discs Standard discs

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only.

The “10% off parts price” offer only includes parts recommended under the inspection program and only applies if the inspection and repairs are booked in through Hutcheon & Pearce by August 31st, 2019.

Current prices effective as of May 2019. Prices subject to change after this period. 10% off parts can not be used in conjunction with any other offer.

Contact your local Hutcheon & Pearce for the most up-to-date pricing

ARTS P N H U K GENUINE KUHN SETS NUMBER MODEL 56115890 56210190 55915900 55916000 55916100

DESCRIPTION

PRICE WHEN FITTED BY US*

GMD 11 reinforced discs and 25 x 56115800 Screw, 25 x 80201262 Nut HD, GMD 100 - FC 100 GMD 11 standard discs, FC 25 x 56210100 Screw , 25 x 80201062 Nut 44 / 55 6 x 55903210 Angled blade left, 6 x 55903310 Angled FC - GMD 100 blade right, 6 x 56115800 Screw, 6 x 80201262 Nut 6 x 55903210 Angled blade left, 6 x 55903310 Angled FC - GMD 100 blade right GMD 11 reinforced discs and 12 x 56115800 Screw, 12 x 80201262 Nut HD, GMD 100 - FC 100

56132100

GMD 11 standard discs, FC 44 / 55

12 x 56150100 Screw , 12 x 80201062 Nut

56132200

GMD 11 standard discs, FC 44 / 55

12 x 56210100 Screw, 12 x 80201062 Nut

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

27

E C N A R A E L C N

KUH

ONE LEFT!

DMR 4855-9 Ripper 4.1M Width 9 Shank

EX DEMO

Location: Temora, NSW RRP: $124,455

SELLING PRICE: $97,790^ Stock #: 23927

FC 3560TCD 3.5m Centre Pull Flail Mower

LSB 1290 D Large Square Baler 1290D 4x3 Location: Cowra, NSW RRP: $228,409 SELLING PRICE: $172,490^

ONE LEFT!

ONE LEFT!

Stock #: 25304

Stock #: 28330

FC 3560 TCS

Conditioner. Location: Wagga, NSW RRP: $65,252 SELLING PRICE: $47,990^

ONE LEFT!

FC 3560 TCS

ONE LEFT!

FC 3560 TLR

ONE LEFT!

FC 4060 TCR

ONE LEFT!

3.5m Center Pull Steel 3.5m Center Pull Steel Roller Mower Conditioner Roller Mower Conditioner

3.5m Side Pull Steel Roller Mower Conditioner

4.0 m Center Pull Rubber Roller Mower Conditioner

Location: Finley, NSW RRP: $69,639

Location: Orange, NSW RRP: $60,429

Location: Forbes, NSW RRP: $73,989

SELLING PRICE: $51,490^ SELLING PRICE: $51,490^

SELLING PRICE: $45,490^

SELLING PRICE: $53,990^

Stock #: 25307

Stock #: 25299

Stock #: 25308

GA 4521 GM

Location: Temora, NSW RRP: $69,639 Stock #: 25306

ONE LEFT!

4.6m Hay rake Location: Cowra NSW RRP: $18,834

GLADIATOR 1205M-1240 Linkage Strip Tillage 12 Row 40’

ONE LEFT!

Location: Finley, NSW EX DEMO ^ SELLING PRICE: $16,790 RRP: $122,828 Stock #: 25315 SELLING PRICE: $99,990^

D L O

S

GMD 240-FF

D L O

S

ONE LEFT!

EXCELERATOR 8005-25 2.4m Linkage Hay Mower Vertical Tillage Trailing Bar Location: Albury, NSW 25’ Location: Finley, NSW RRP: $15,942 RRP: $131,158 SELLING SELLING PRICE: $12,990^ PRICE: $97,790^ EX Stock #: 25317 Stock #: 23926

Stock #: 25282

ONE LEFT!

DEMO

HURRY WHILE STOCK LASTS - CALL FOR MORE INFORMATION: 0429 370 860

28

^All prices shown in Australian dollars including GST. Images are for illustrative purposes only. While stocks last. Only one of each stock number left.

S T R A P G A N O I T P O Any Machine, Any Age, Any Colour Hutcheon & Pearce is proud to partner with Option AgParts an online importer, distributor and retailer of quality non-OEM aftermarket Agricultural and Industrial parts. Option AgParts endeavour to provide their customers and resellers with Australia’s largest range of online quality aftermarket parts at everyday low prices.

You can order aftermarket parts from your local Hutcheon & Pearce Branch for any machine, any age or any colour!

Whether you have an older John Deere Machine or a mixed fleet, Hutcheon & Pearce can offer you a variety of products for different applications.

By purchasing through Option AgParts (OAP), you can be assured of the following:  OAP only supply parts from trusted parts manufacturers including A&I Products and Lankota.  All OAP parts manufacturers use OEM industry standard Quality Assurance processes.  The OAP supply chain is supported by knowledgeable Option AgParts staff and certified resellers. They are available online and on the phone to answer any questions and assist you through the purchase process.  You will always receive quality customer service from Hutcheon & Pearce, backed with fast delivery, to ensure the right parts are delivered when they are needed (freight costs may apply).  All parts are supported by a 12-month replacement warranty.

Talk to Hutcheon & Pe about your aft arce high-wear andermarket parts for all yoservice u equipment, an r hay place a pre-se d to aso order today. n

Ask us about Aftermarket Parts options for your Machine.

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

29

Contact your local Hutcheon & Pearce for the most up-to-date pricing

RTS A P A T O K LAN CAB PARTS NUMBER LANMB001BH LANMBJD003 LANMBJD005 LANMBJD007 LANMBJD012 LANMBJD014 LANMBJD015 LANMBJD017 LANMBJD018 LANMBJD019 LANMBJD020 LANMBJD100 LANMBJD101 LANMBJD102 LANJDFR120

30

DESCRIPTION

APPLICATION

Wing knob bag of hardware needed to attach various Lankota cab monitor brackets Mounting bracket for the top of the front pillar in John Deere® 7, 8, & 9R Series CommandView™ cabs Cab top side mounting bar for John Deere® 7, 8, & 9R Series CommandView™ cabs Swiveling monitor mounting arm and hardware Mounting bracket for the front pillar in John Deere® 7, 8, & 9R Series CommandView™ cabs Mounting bracket for the rear pillar in John Deere® 7, 8, & 9R Series CommandView™ cabs Mounting bracket for the rear pillar in John Deere® 7, 8, & 9R Series CommandView™ cabs Modular tube mounting collar Stainless steel modular tube, 30.5" long Modular tube mounting arm, 19" long Modular tube mounting arm, 8" long Cab Corner Cubby for John Deere® 7, 8, & 9R Series CommandView® cabs Display mount for John Deere®2600, 2630, 4640 & "Brown Box" Monitors CB & mic mount for John Deere® CommandView™ cabs Footrest for John Deere®

TYPE

PRICE*

Lankota Lankota Requires LANMBLankota JD003 & LANMBJD014 to mount Lankota Does not work with LANMBLankota JD100 Lankota Lankota Needs LANMBJD017 to mount

Can't use with LANMBJD012

Lankota Lankota Lankota Lankota Lankota Lankota Lankota Lankota

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

ER

L A B D N U O D 650 R

N A L L O H EW

N

BELTING - BALER STARTER FLAPS

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NUMBER

DESCRIPTION

TYPE

A-86548821 A-9848760

Sledge Roll Belt Cleaner Strip Belt Scraper Cleaner Strips

A&I Products A&I Products

PRICE*

BELTING - BULK BALER & CONVEYOR BELTING NUMBER

DESCRIPTION

TYPE

A-1001854100 A-1002048100 A-1002048300 A-1002244100 A-1002244300 A-1002301100 A-1002301360 A-1002853100 A-1002853300 A-1002979100 A-1002979300 A-1003596100 A-1003596300 A-1003777100 A-1003777300

BULK, 3 PLY, Texture Top, 7 X 100' Upper BULK, 2 PLY, Texture Top, 7 X 100' Upper BULK, 2 PLY, Texture Top, 7 X 300' Upper BULK, 3 PLY, Mini Rough Top, 7 X 100' Upper BULK, 3 PLY, Mini Rough Top, 7 X 300' Upper BULK, 3 PLY, Diamond Top, 7" X 100' Upper BULK, 3 PLY, Diamond Top, 7" X 360' Upper BULK, 3 PLY, Continuous Chevron, 7 X 100' Upper BULK, 3 PLY, Continuous Chevron, 7 X 300' Upper BULK, 3 PLY, 0.315 Thick, Mini Rough Top, 7 X 100' Upper BULK, 3 PLY, 0.315 Thick, Mini Rough Top, 7 X 300' Upper Bulk Baler Belting, MRT, 7" X 100 Ft. Upper Bulk Baler Belting, MRT. 7" X 300 Ft. Upper BULK, 3 PLY, Regular Chevron, 7 X 100' Upper BULK, 3 PLY, Regular Chevron, 7 X 300' Upper

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

BELTING - ROUND BALER BELTING NUMBER

DESCRIPTION

TYPE

A-1002461 A-1002462 A-1002981 A-1003770 A-1011615 A-1011618

Baler Belt, Upper Baler Belt, Upper Baler Belt, Upper Baler Belt, Upper Baler Belt, Upper; Ideal W/ AR Baler Belt, Upper; Ideal

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

CHAINS/ SPROCKETS/ PULLEYS/ HUBS - SPROCKETS NUMBER

DESCRIPTION

TYPE

A-84401598 A-87028608 A-87032323 A-87052121 A-9806931

Sprocket, Idler, 13T Clutch Half, Roll Drive Sprocket / Clutch, Roll Drive, 22T Gear, Roll; 24 Tooth Used On Stripper, Middle & Pivot Rolls Gear, Idler, Sledge Roll Drive

A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

31

ND A L L O H NEW

R

E L A B D N U 650 RO

Contact your local Hutcheon & Pearce for the most up-to-date pricing

DRIVELINE (BY APPLICATION) - DRIVELINE COMPONENTS NUMBER DESCRIPTION

TYPE

A-29214 A-80680 A-855141

A&I Products A&I Products A&I Products

Cross & Bearing Kit 2/1992-9/1995 WASHER 3/8" LOCK 2/1992-9/1995; SN <881686 Safety Slide Lock Tractor Yoke 2/1992-9/1995; SN <881686

PRICE*

HAY TOOL PARTS - MISC. BALER PARTS NUMBER

DESCRIPTION

TYPE

A-12595 A-131673 A-167050 A-573649 A-617945 A-81866169 A-84401598 A-857072 A-86536275 A-86542665 A-86548970 A-86553395 A-86559592 A-86636773 A-86977429 A-87028608 A-87032323 A-87052121 A-87398962 A-87639816 A-9803325 A-9804060 A-9806864 A-9806931 A-9808110 A-9809176 A-9825987 A-9845575 A-9848489

Follower, Cam Baler Tooth Bushing Pulley Knife, Twine Cutting Latch, 1/4 Turn Sprocket, Idler, 13T Gauge, 3000 psi, Belt Tension Bearing, Cam follower Canvas, Net Wrap Brake Bar Bearing, Flange Support, Sledge Follower Roller; 1.14 Square Hub Spring, Extension Plate, Bearing Mount, RH, Net Wrap Knife Arm Bushing, Sprocket / Clutch, Roll Drive Clutch Half, Roll Drive Sprocket / Clutch, Roll Drive, 22T Gear, Roll; 24 Tooth Used On Stripper, Middle & Pivot Rolls Hub, Sledge Clutch, Jaw Support, Bearing, Dimple Roll Chain; Main Drive Knife, Net Wrap Gear, Idler, Sledge Roll Drive Washer, Sprocket / Clutch, Roll Drive Bushing, Starter Roll Sprocket Bushing, Pivot Roll Sprocket Blade, Scraper Bearing Assembly,; Follower Roll Smooth & Backup Roll / Pivot Sledge Roll

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - MISC. MOWER CONDITIONER PARTS NUMBER

DESCRIPTION

TYPE

A-204RR6-I

Bearing, Ball; Cylindical, Round Bore

A&I Products

PRICE*

TEETH - TEETH: BALER, HARROW RAKE, TEDDER, ETC.

32

NUMBER

DESCRIPTION

TYPE

A-131673

Baler Tooth

A&I Products

PRICE*

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

IONER

NDIT O C R E W 1 MO

43 1 D N A L L O

NEW H

BELTS - HAY AND FORAGE BELTS

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NUMBER

DESCRIPTION

TYPE

PRICE*

A-86627796 A-86627797

Belt, Transmisson Header Drive Belt, Header Drive; 740 RPM Roll Speed

A&I Products A&I Products

$225.52 $111.11

TYPE

PRICE*

DRIVELINE (BY APPLICATION) - CV DRIVELINE ASSEMBLY NUMBER

DESCRIPTION

A-87056346N Driveline, Double CV Without Swivel Hitch A-87056348N Driveline, Double CV Without Swivel Hitch

A&I Products A&I Products

DRIVELINE (BY APPLICATION) - DRIVELINE COMPONENTS NUMBER

DESCRIPTION

TYPE

A-86520896 A-86551252 A-86598606

Cross & Bearing Kit 1/1997> Cross & Bearing Kit 1/1997> Auto-Lok Tractor Yoke 1/1997>

A&I Products A&I Products A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - TRACTOR HALF CV DRIVELINE NUMBER

DESCRIPTION

TYPE

A-86539411 A-86592683

Tractor CV Half; 1 3/4"- 20 Spline Tractor CV Half; 1 3/8"- 21 Spline

A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADE BOLTS & NUTS NUMBER

DESCRIPTION

TYPE

A-86515925K A-86515926 A-86515926K A-87053834

Bolt Kit, Disc Mower Discs W/O Lifters Bolt, Disc Mower Blade (6/Pack) Discs W/ Lifters Bolt Kit, Disc Mower Blade (6/Pack) Discs W/ Lifters Nut, Disc Mower Blade

A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADES NUMBER

DESCRIPTION

TYPE

A-86621872 A-86621873 A-9847683 A-9847684

Blade, Disc Mower, RH, 14 Degree Twist SN 657933> Blade, Disc Mower, LH, 14 Degree Twist SN 657933> Blade, Disc Mower, RH, 7° Twist Blade, Disc Mower, LH, 7° Twist

A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER PARTS NUMBER

DESCRIPTION

TYPE

A-87646406

Disc, Blade Mount

A&I Products

PRICE*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

33

ND 1431

LA

NEW HOL

ER

DITION N O C R E MOW

Contact your local Hutcheon & Pearce for the most up-to-date pricing

HAY TOOL PARTS - MISC. MOWER CONDITIONER PARTS NUMBER

DESCRIPTION

TYPE

A-204RR6-I A-86519039 A-86519042 A-86575514 A-87659928

Bearing, Ball; Cylindical, Round Bore Shaft, Drive, 10.55" / 268mm Shaft, Drive, 9.76" / 248mm Bearing, Ball Bushing, Spherical

A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

LIGHTS & RELATED PARTS - REPLACEMENT BULBS/ LENSES NUMBER

DESCRIPTION

TYPE

A-1157-LED

Bulb, LED; Replaces Bulb #1157 (2 Pack)

A&I Products

PRICE*

MISCELLANEOUS NUMBER

DESCRIPTION

TYPE

A-87646406

Disc, Blade Mount

A&I Products

ER

MOW C S I D 2 6 ND 4

LA

NEW HOL

PRICE*

BELTS - HAY AND FORAGE BELTS NUMBER

DESCRIPTION

TYPE

A-274223 A-274224

Belt, Main Drive (Set of 3) Belt, Main Drive (Set of 4)

A&I Products A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - DRIVELINE ASSEMBLY

34

NUMBER

DESCRIPTION

TYPE

A-CS53517

Driveline; W/ Overrunning Clutch

A&I Products

PRICE*

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

ER W O M C S I D 462 D

AN

L NEW HOL

Contact your local Hutcheon & Pearce for the most up-to-date pricing

DRIVELINE (BY APPLICATION) - DRIVELINE COMPONENTS NUMBER

DESCRIPTION

TYPE

A-274033 A-274034 A-279511 A-279512 A-279514 A-279515 A-279516 A-279519 A-279520 A-279521 A-411728 A-440521 A-440522 A-62218 A-744051 A-782083 A-782084

Safety Shield 7/1977-12/1995 Safety Shield 7/1977-12/1995 Outer Tube 7/1977-12/1995; SN R0526> Inner Tube 7/1977-12/1995; SN R0526> Inner Tube Yoke 7/1977-12/1995; SN R0526> Complete Safety Shield 7/1977-12/1995; SN R0526> Complete Safety Shield 7/1977-12/1995; SN R0526> Shield Bearing, Outer 7/1977-12/1995; SN R0526> Shield Bearing, Inner 7/1977-12/1995; SN R0526> Outer Tube Yoke 7/1977-12/1995 Bearing Ring, For Guard Size SC25 / SD25 7/1977-12/1995 Inboard Yoke, 2300 Series, 2a 7/1977-12/1995 Inboard Yoke, 2300 Series, 1b 7/1977-12/1995 Roll Pin 7/1977-12/1995 Quick Disconnect Pin Repair Kit 7/1977-12/1995 Push Pin Kit 7/1977-12/1995; SN R0526> RA1 Overrunning Clutch, Size 5, 14150 Lb., QD Pin, 1 3/8" 6 Spline 7/1977-12/1995; SN R0526>

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADE BOLTS & NUTS NUMBER

DESCRIPTION

TYPE

A-VLH1706 A-0480-02973 A-56115800KN A-56210100K A-697550 A-697552 A-766728K

Bolt Kit, Disc Mower Blade (Package Of 10) Used W/ Blades 784220 & 784221 Nut Used W/ Blades 784220 & 784221 BOLT, DISC MOWER BLADE Used W/ Blades 784220 & 784221 Bolt Kit, Disc Mower Blade Used W/ Blades 766726 & 766727 Nut, Blade Bolt Kit, Disc Mower Blade Bolt Kit, Disc Mower Blade

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADES NUMBER

DESCRIPTION

TYPE

A-274096 A-274097 A-274230 A-697551 A-76N941 A-76N942 A-766726 A-766727 A-784220 A-784221

Blade, Disc Mower, LH SN < Z1643 Blade, Disc Mower, RH SN < Z1643 Blade, Disc Mower, Double edge Blade, Disc Mower Blade, Disc Mower, RH W/ STD Disc Blade, Disc Mower, LH W/ STD Disc Blade, Disc Mower, LH W/ Standard Disc Blade, Disc Mower, RH W/ Standard Disc Blade, Disc Mower, LH W/ Heavy Duty Disc Blade, Disc Mower, RH W/ Heavy Duty Disc

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

35

LAN

NEW HOL

ER

MOW C S I D 2 D 46

HAY TOOL PARTS - DISC MOWER PARTS

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NUMBER

DESCRIPTION

TYPE

A-274117 A-781809 A-781809NH A-781810 A-781810NH A-9805078

Disc Guard, Stone Guard, Stone Guard, Shoe, Inner Guard, Shoe, Inner Disc, HD

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - MOWER CURTAIN

36

NUMBER

DESCRIPTION

TYPE

A-274159

Curtain, Disc Mower, Economy

A&I Products

PRICE*

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

R

BALE D N U O R 455

8 CASE-IH

BULK BELTING

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NUMBER

DESCRIPTION

TYPE

A-1001854100 A-1002048100 A-1002048300 A-1002244100 A-1002244300 A-1002301100 A-1002301360 A-1002853100 A-1002853300 A-1002979100 A-1002979300 A-1003596100 A-1003596300 A-1003777100 A-1003777300

BULK, 3 PLY, Texture Top, 7 X 100' Upper BULK, 2 PLY, Texture Top, 7 X 100' Upper BULK, 2 PLY, Texture Top, 7 X 300' Upper BULK, 3 PLY, Mini Rough Top, 7 X 100' Upper BULK, 3 PLY, Mini Rough Top, 7 X 300' Upper BULK, 3 PLY, Diamond Top, 7" X 100' Upper BULK, 3 PLY, Diamond Top, 7" X 360' Upper BULK, 3 PLY, Continuous Chevron, 7 X 100' Upper BULK, 3 PLY, Continuous Chevron, 7 X 300' Upper BULK, 3 PLY, 0.315 Thick, Mini Rough Top, 7 X 100' Upper BULK, 3 PLY, 0.315 Thick, Mini Rough Top, 7 X 300' Upper Bulk Baler Belting, MRT, 7" X 100 Ft. Upper Bulk Baler Belting, MRT. 7" X 300 Ft. Upper BULK, 3 PLY, Regular Chevron, 7 X 100' Upper BULK, 3 PLY, Regular Chevron, 7 X 300' Upper

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

BELTING - ROUND BALER BELTING NUMBER

DESCRIPTION

TYPE

A-1002861 A-1002865 A-1003211 A-1004105 A-1011635

Baler Belt, Upper Baler Belt, Upper Baler Belt, Upper, Optional Baler Belt, Upper

A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

BELTS - HAY AND FORAGE BELTS NUMBER

DESCRIPTION

TYPE

A-57596

Belt

A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - DRIVELINE COMPONENTS NUMBER

DESCRIPTION

TYPE

A-105862 A-700707171 A-700707173 A-700709040 A-700709041 A-700709042 A-BP517068001 A-700709851 A-700709852 A-700709853 A-700710342 A-700716757

Inner Tube Yoke (SN <CFH0078501) Cross & Bearing Kit (SN <CFH0078501) Inner Tube - Rilsan Coated (SN <CFH0078501) Tractor Yoke, Splined 1 3/8" - 6 Spline w/ Slide Collar, CV (SN <CFH0078501) Cross & Bearing Kit (CV) (SN <CFH0078501) CV Center Yoke (SN <CFH0078501) CV Cone w/ bearing (SN <CFH0078501) Outer Tube Yoke (SN <CFH0078501) Outer Tube (SN <CFH0078501) Implement Yoke, Splined 1 3/8" - 6 Spline w/ Interfering Clamp Bolt (SN <CFH0078501) Tractor Yoke, Splined 1 3/4" - 20 Spline w/ Slide Collar, CV (SN <CFH0078501) Tractor Yoke, Splined 1 3/8" - 21 Spline w/ QD, CV (SN <CFH0078501)

A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

37

455

8 CASE-IH

LER ROUND BA

Contact your local Hutcheon & Pearce for the most up-to-date pricing

DRIVELINE (BY APPLICATION) - TRACTOR HALF CV DRIVELINE NUMBER

DESCRIPTION

TYPE

A-700709854

Constant Velocity Shaft less Implement Yoke SN <CFH0078501

A&I Products

PRICE*

HAY TOOL PARTS - MISC. BALER PARTS NUMBER

DESCRIPTION

TYPE

A-51318 A-700705612 A-700710945 A-712158

Bearing, Roller, Feeder Bearing, Cam follower Disc Clutch Bearing , Roller, Spherical

A&I Products A&I Products A&I Products A&I Products

PRICE*

MISCELLANEOUS NUMBER

DESCRIPTION

TYPE

A-541857R92

Sprocket, Idler; Feeder Reverser

A&I Products

31

DCX1 H I E S A C

PRICE*

ER

DITION N O C R E MOW

BELTS - HAY AND FORAGE BELTS NUMBER

DESCRIPTION

TYPE

A-86627796 A-86627797

Belt, Transmisson Header Drive Belt, Header Drive; 740 RPM Roll Speed

A&I Products A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - CV DRIVELINE ASSEMBLY NUMBER

DESCRIPTION

TYPE

A-87056346N A-87056348N

Driveline, Double CV Without Swivel Hitch Driveline, Double CV Without Swivel Hitch

A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADE BOLTS & NUTS

38

NUMBER

DESCRIPTION

TYPE

A-86515925K

Bolt Kit, Disc Mower Discs W/O Lifters

A&I Products

PRICE*

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

ER

TION I D N O R C E L R A BE NDOW M U O 1 R 3 1 5 X 5 C 4 8D CCAASSEE-I-HIH

Contact your local Hutcheon & Pearce for the most up-to-date pricing

HAY TOOL PARTS - DISC MOWER BLADES NUMBER

DESCRIPTION

TYPE

A-86621872 A-86621873 A-9847683 A-9847684

Blade, Disc Mower, RH, 14 Degree Twist Blade, Disc Mower, LH, 14 Degree Twist Blade, Disc Mower, RH, 7° Twist Blade, Disc Mower, LH, 7° Twist

A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER PARTS NUMBER

DESCRIPTION

TYPE

A-87646406

Disc, Blade Mount

A&I Products

PRICE*

HAY TOOL PARTS - MISC MOWER CONDITIONER PARTS NUMBER

DESCRIPTION

TYPE

A-86519042 A-87659928

Shaft, Drive, 9.76" / 248mm Bushing, Spherical

A&I Products A&I Products

PRICE*

LIGHTS & RELATED PARTS - REPLACEMENT BULBS/ LENSES NUMBER

DESCRIPTION

TYPE

A-1157-LED

Bulb, LED; Replaces Bulb #1157 (2 Pack)

A&I Products

PRICE*

MISCELLANEOUS NUMBER

DESCRIPTION

TYPE

A-87646406

Disc, Blade Mount

A&I Products

ER

BAL E R A U Q S X432

B

L CASE-IH

PRICE*

BEARINGS (BY APPLICATION) - 3 BOLT FLANGETTE FOR SELF-ALIGN NUMBER

DESCRIPTION

TYPE

A-86620026

Flange, Triangular

A&I Products

PRICE*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

39

BX4

L CASE-IH

R

BALE E R A U Q S 32

Contact your local Hutcheon & Pearce for the most up-to-date pricing

DRIVELINE (BY APPLICATION) - CV DRIVELINE ASSEMBLY NUMBER

DESCRIPTION

TYPE

A-84110103 A-84110104 A-84110105

Complete 80° CV Driveline; 540 RPM Complete 80° CV Driveline; 1000 RPM Complete 80° CV Driveline

A&I Products A&I Products A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - DRIVELINE COMPONENTS NUMBER

DESCRIPTION

TYPE

A-84819714

Cross & Bearing Kit

A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - MACHINE HALF CV DRIVELINE NUMBER

DESCRIPTION

TYPE

A-84819733

Machine Half SN <527999

A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - TRACTOR HALF CV DRIVELINE NUMBER

DESCRIPTION

TYPE

A-84819732 A-84819742 A-84819744

Tractor CV Half SN <527999 Tractor CV Half SN <527999 Tractor CV Half SN <527999

A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - MISC. BALER PARTS NUMBER

DESCRIPTION

TYPE

A-84015292

Latch, Lock, 1/4" Turn

A&I Products

PRICE*

LIGHTS & RELATED PARTS - ROTATING BEACON NUMBER

DESCRIPTION

TYPE

A-82018390

Rotating Beacon, Amber, Pipe Type

A&I Products

PRICE*

LIGHTS & RELATED PARTS - WARNING LIGHTS NUMBER

DESCRIPTION

TYPE

A-RLP2058

Bracket, Rotating Beacon Mount, Threaded

A&I Products

PRICE*

TEETH - TEETH: BALER, HARROW RAKE, TEDDER, ETC.

40

NUMBER

DESCRIPTION

TYPE

A-9847572

Rubber Mtd Tooth - 2 Prong

A&I Products

PRICE*

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices effective as of May 2019. Prices subject to change after this period.

OWER M C S I D MD700

NG

KUH T E K R A M AFTER

Contact your local Hutcheon & Pearce for the most up-to-date pricing

BELTS - HAY AND FORAGE BELTS NUMBER

DESCRIPTION

TYPE

A-83101791

Mower Belt (Set of 4)

A&I Products

PRICE*

DRIVELINE (BY APPLICATION) - DRIVELINE ASSEMBLY NUMBER

DESCRIPTION

TYPE

A-CS53517 A-4500560 A-4600331

Driveline; W/ Overrunning Clutch Disc Mower Shaft Optional Complete Driveline

A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADE BOLTS & NUTS NUMBER

DESCRIPTION

TYPE

A-VLH1706 A-0480-02973 A-56115800 A-56115800KN A-80201252

Bolt Kit, Disc Mower Blade (Package Of 10) Used W/ Blades 55903210 & 55903310 Nut Used W/ Blades 55903210 & 55903310 Bolt Kit, Disc Mower Blade BOLT, DISC MOWER BLADE Used W/ Blades 55903210 & 55903310 Nut, Disc Mower Bolt (12mm)

A&I Products A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER BLADES NUMBER

DESCRIPTION

TYPE

A-55903210 A-55903310 A-76N945 A-76N946

Blade, Disc Mower, LH Angled Blade For STD Discs Blade, Disc Mower, RH Angled Blade For STD Discs Blade, Disc Mower, LH Blade, Disc Mower, RH

A&I Products A&I Products A&I Products A&I Products

PRICE*

HAY TOOL PARTS - DISC MOWER PARTS NUMBER

DESCRIPTION

TYPE

A-56801420 A-56801700

Guard, Stone SN 940001-960530 Plate, Skid SN 940001>

A&I Products A&I Products

PRICE*

HAY TOOL PARTS - MOWER CURTAIN NUMBER

DESCRIPTION

TYPE

A-56840710

Curtain, Disc Mower SN 970001>

A&I Products

PRICE*

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

41

S M A R G O R P E C I V R E S E C I R P D E X I

F

Your tractor‘s engine is the lifeblood of your machine.

Keep your tractor running at peak performance with our John Deere quality engine parts.

MULTI-UNIT SERVICE DISCOUNT:  1 Unit - Normal Price 2 Units - 25% labour discount on a service** 3-5 Units - 50% labour discount on a service**  5+ Units - 100% labour discount on the lesser value service** Additional mechanical repairs outside of warranty will be charged at normal retail rates. ** Must be booked and completed in the same visit. Discount will apply to the lesser value service.

S M A R G O R P N O

I T C E P can be costly.

INS So why take chances when you depend onDowntime your equipment to keep MULTI-UNIT INSPECTION DISCOUNT:

your operation running smoothly?

 1 Unit - Normal Price 2 Units - 50% labour discount on the second inspection* 3-4 Units - 1 Inspection for free*  5 Units - 2 Inspections for free* *Must be booked and completed in the same visit. Discount will apply to the lesser value inspection.

42

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Current prices affective as of May 2019. Prices subject to change after this period.

6, 7

G N I C I V R E S S E I R E S 8 &

Your time is valuable. Let us take care of your servicing needs with our competitive fixed priced servicing programs.

Service and inspection includes: Complete service as per the manufacturers guidelines and recommendations.

Standard Service

On Site Discount Service Travel Charges:

 Machine visual

l

and operational inspection  Lubricate all service points  Software and PIP updates (if any)  Check engine and transmission adjustments  Check battery, charging system and cables  Change engine oil and filter  Replace fuel filter (if required)  Inspect / replace engine air filters  Machine safety check  Check wheel bolt torque  Check loader operation (if fitted)

FREE travel until 31st July 2019. Talk to your local H&P Dealer about the best options for your fleet.

Conditions* - Oils, coolant, filters and parts are not included - Travel charges apply for on-site servicing - No additional work will be done without your authorisation.

- Additional mechanical repairs outside of warranty will be charged at normal retail rates.

- A service fee will apply to cover incidental workshop materials and environmental levies

Extensive Service

6000 SERIES

 Includes all items listed in

SERVICE TYPE

FIXED PRICE LABOUR SPECIAL

Standard Extensive Major

$330* Inc GST $495* Inc GST $660* Inc GST

7000 & 8000 SERIES Standard Extensive Major

$396* Inc GST $528* Inc GST $726* Inc GST

the standard service  Replace transmission / hydraulic filters

Major Service  Includes standard and

extensive service  Change transmission / hydraulic filters and oil  Replace engine coolant (if required)

Major Service Additional Items Check and adjust engine valve clearance – Add $600 to service cost (excludes IT4 and FT4 engines on 6R machines).

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

43

PRIC2E

250

*

T inc GS

$

FIXED

ka ot boo me Why n he same ti l e at t tiona servic avoid addi s. e and charg travel

6, 7 & 8000 SERIES INSPECTIONS Before you get to work, make sure your equipment is ready. Let our qualified staff inspect your tractor and catch the problems before you hit the field, Reduce potential downtime, increase machine performance and enhance the long-term value of your equipment with a Hutcheon & Pearce PerforMaxTM Inspection.

Fixed price includes:  On-site inspection  Full inspection check  Written report on our findings

 Steering and brakes  Hitch and hydraulic pressure tests  Operator station inspection

Conditions2 - Repairs will be completed in a mutually agreed time frame.

- Parts and labour for recommended repairs not included - Customers must have an up to date and current account.

- All recommended service repairs are completed using genuine John Deere parts.

- Travel for on-site inspection is included in price (up to 150kms from nearest Hutcheon & Pearce location).

H&P Inspection includes:  Control & electrical system  Engine, fuel and cooling system  Damper / harmonic balancer  Transmission and powertrain

No additional call out fee for inspections!

 Axles

44

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Price only applies if Inspection and Repairs are booked in by August 31st 2019.

Current prices affective as of May 2019. Prices subject to change after this period.

$2.00/hr

Maintenance e plans availabl ur ho e from $2/engin ntact your T+Cs apply. Co local store for details

Hutcheon & Pearce MAINTENANCE CONTRACTS Let us take care of the maintenance of your fleet so you can focus on managing your business.

Maximise Your Equipment Performance

Parts and Labour Benefits

When you enter in one of our fixed price servicing agreements, maximising your equipment performance is our number one priority. During our regular servicing, we will ensure that your machine has the latest available software installed free of charge.

We only use genuine John Deere OEM parts and the highest quality specially formulated John Deere Plus-50 IITM oil. Any additional repairs completed by Hutcheon & Pearce during the agreement period will carry a 1 year parts and labour warranty on the work completed.

Factory Trained Technicians

Machine Inspections

We continually invest in providing our technicians with a wide range of state of the art training. This includes John Deere Instructor Lead training, online training courses and the latest in virtual John Deere instructor training.

We will inspect your machine thoroughly during service intervals to ensure that potential issues are identified before it costs you downtime and added repair expense.

Your Time is Valuable Let us take the stress and time away from servicing your own equipment. Your time is valuable, so let us focus on keeping your equipment in optimal condition

Enhance your resale value Ensure you get the maximum return when it comes time to trade or sell your machine. You will have a full documented service history that is completed by John Deere trained technicians.Â

Come and talk to us today about creating a maintenance plan for your equipment.

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

45

TECHNOLOGY ENABLED CUSTOMER SUPPORT TECSight® (Technology Enabled Customer Support) is a department within Hutcheon & Pearce dedicated to over-the-phone support of our products a nd technology.

With nearly all products we sell at Hutcheon & Pearce going out the door with a piece of technology built in or added to it we recognise that customers don’t want to have to pay travel and labour for simple issues or just to help with setting up guidance or documentation.

Key Benefits: 1. Reduce your downtime by having answers when and where you need them.

2. Reduce costs of unnecessary travel and labour for simple issues.

3. Have comfort knowing a fully qualified factory trained technician is available to you with the tools, simulators and resources available at their fingertips to keep you going.

4. Reduce your workload by having your operators contact us for help.

5. Have the security of someone monitoring your JDLink™ enabled equipment and notifying you of important codes that may come up. to name only a few…

At only $550 per year per farm it’s worth giving us a call.

Make technology work for you. tel: (02) 5924 5111 email: tecsight@hutcheonandpearce.com.au www.hutcheonandpearce.com.au www.tecsight.com.au

46

*All prices shown in Australian dollars including GST. Prices are until November 30th 2019. Images are for illustrative purposes only.

ORDER FORM Company / Trading Name Customer Name Contact Number

Customer Account Number

Email Address

Quantity of Items

Part Number

Part Description

Price (each)

Total

Total Amount Ordered Freight charges Total Amount

Customer Signature

Date

/

/

Please fill out this form and bring it into your local Hutcheon & Pearce Dealer or for more information, give us a call.

Hutcheon & Pearce 2019 Pre-season Aftermarket Baler Catalogue

47

HUTCHEON & PEARCE BEHIND YOU ALL SEASON LONG

ALBURY PO Box 823 222 Travelstop Way Albury NSW 2640 Phone: (02) 6058 6800 COLEAMBALLY 32 Bencubbin Way Coleambally NSW 2707 Phone: (02) 6954 4280

CONDOBOLIN 1a May Street, Condobolin NSW 2877 Phone: (02) 6891 2222

FORBES Angus Clarke Drive Forbes NSW 2870 Phone: (02) 6862 1666

ORANGE 26 Scott Place Orange NSW 2800 Phone: (02) 6362 9988

COWRA PO Box 160 64-68 Young Road Cowra NSW 2794 Phone: (02) 6341 4800

GRIFFITH Cnr Oakes Rd & Irving Place Griffith NSW 2680 Phone: (02) 6969 5300

TEMORA 101 Kitchener Road Temora NSW 2666 Phone: (02) 6977 1100

FINLEY 16 Riverina Highway Finley NSW 2713 Phone: (03) 5883 1655

LAKE CARGELLIGO 63 Canada Street, Lake Cargelligo NSW 2672 Phone: (02) 6898 1305

www.hutcheonandpearce.com.au

WAGGA WAGGA 57 Moorong Street Wagga Wagga NSW 2650 Phone: (02) 6933 7900 TECSight® Support Centre (02) 5924 5111