1F-14 Engine Cooling System: 3) Install a new mechanical seal using a suitable size socket wrench.
Assembly 1) Install the oil seal with the special tool. !
!
CAUTION
CAUTION
Replace the oil seal with a new one.
Replace the mechanical seal with a new one.
NOTE
NOTE
The stamped mark on the oil seal should face mechanical seal side.
On the new mechanical seal, the sealer “A” has been applied.
Special tool (A): 09913–70210 (Bearing installer set)
(A)
“A” I940H1160037-01
I940H1160035-01
2) Apply a small quantity of grease to the oil seal lip. : Grease 99000–25010 (SUZUKI SUPER GREASE A or equivalent)
I940H1160038-01
4) Install the rubber seal (1) into the impeller. 5) After wiping off the oily or greasy matter from the mechanical seal ring (2), install it into the impeller. NOTE I940H1160036-01
The paint marked side “B” of mechanical seal ring faces the rubber seal.
“B”
1
2
I940H1160039-02