• High quality Chrome Vanadium steel satin finished shafts with shot blasted and magnetized tips.
• Features hexagonal bolster for use with a wrench.
• Contoured, textured soft-grip handles with hammer caps.
3/8"Sq Drive
$174.25
6pc Extra-Long Pick & Hook Set
• Six long reach picks with black finished steel shafts.
• Contents: Straight, Right Angle, Half-Round, Swan Neck, 45°/ 90° Tip, 40°/45° Tip.
• Suitable for pin/clip picking and the removal of O-rings and seals.
• Length: 235mm.
Calibrated Insulated Micrometer Torque Wrench 5-25Nm
• Chrome Vanadium steel reversible 60-tooth ratchet head.
• Impact resistant polycarbonate tubing combined with injection moulded nylon thermoplastic for total insulation.
• Torques in both directions.
• Calibration tolerance in accordance with BS EN ISO 6789:2017.
• Accuracy of ±1% at 21°C.
• Micrometer type torque range adjustment with scale graduated in both lb.ft and Nm.
• Cold and heat resistant –40°C to +70°C.
• Fully insulated to BS EN IEC 60900:2018 to protect from electric shocks up to 1500V DC and 1000V AC.
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Includes test and calibration certificate.
WheelEazy™ Wheel Fitting & Alignment Tool
• Designed to assist with the lifting and locating of road wheels on to vehicle hubs and intended to be used where there is no access to a vehicle lift, such as by the roadside.
• Significantly reduces lifting strain whilst notably improving body posture.
• Supplied with four CNC machined stainless steel adaptor pegs complete with storage holder.
• Suitable for most cars, light goods vehicles, motor homes and caravans.
• Manufactured from high quality stainless steel.
• Polypropylene and TPV rubber soft grip handle for comfort and control.
$59.54
• High quality S2 steel bits with a zinc phosphate finish, each size in 30 and 75mm lengths.
• Hardened (58-62 HRC) and tempered for added strength.
• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.
• Supplied in storage case with inclined tray for quick and easy bit selection.
$262.62
• For use on alloy or steel wheels up to 35kg.
• Patent Pending. $133.50
*Prices are valid at the time of printing and are subject to change without notice.
Washer Jet Tool
• Compact, double end tool with pocket-clip.
• Screwed caps house a pointed scribe for cleaning and clearing washer jets at one end and finer probe for adjusting position of jets at the other.
• Heavily knurled body for sure handling.
• Overall Length: 104mm.
$26.15
1/2"Sq Drive Extra-Long Spline Socket Bits
• Save valuable time and loosen drive shaft screws from the outside.
• Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel sockets.
• Chrome plated with satin finish.
• Knurled ring on socket for secure handling.
5pc TRX-Star* Double End Spanner Set
• Manufactured from drop-forged Chrome Vanadium steel.
• Hardened and tempered with a fully polished mirror finish for resistance to corrosion.
• Five spanners covering 10 sizes of TRX-Star* fixings.
• Sizes: E6 x E8, E10 x E12, E14 x E16, E18 x E20, E22 x E24.
• Supplied in EVA storage tray.
$81.08
15pc 1/4"Sq Drive Low Profile Socket Set Platinum Series
HSYCode822080951
• Manufactured from hardened and tempered Chrome Vanadium steel with a micro satin finish.
• Low profile 6-point WallDrive® sockets.
• S2 Steel spline bit extension with phosphate coating. $115.75
7pc Extra-Long Double End Ring Spanner Set
• Extra-long, drop-forged, Chrome Vanadium steel 12-point WallDrive® ring spanners.
• Hardened, tempered and chrome plated with a fully polished mirror finish. •
$262.62
27pc Master Hex Key Set
• Low profile 90-tooth pear-head ratchet with super slim handle.
• Features flip reverse and quick release mechanism.
Ø57-120mm Swivel Jaw Filter Pliers
• Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters.
• Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control. •
Telescopic Magnetic Pick-Up Tool
4pc 3/8"Sq Drive Spark Plug Socket Set Magnetic
• Forged, Chrome Vanadium steel, 3/8"Sq drive WallDrive® sockets, polished chrome finish.
• Heavy-duty 7-section magnetic pick-up tool.
• Textured grip and pocket-clip.
• Ø10mm Magnet gives 1.6kg capacity.
• Minimum/Maximum Length: 175/880mm.
14mm 3/8"Sq Drive 12-Point Spark Plug Socket with Magnetic Retainer
• Designed for use where plug clearance is tight.
• Standard depth, thin wall, 12-point 3/8"Sq drive 14mm socket with magnetic insert to retain spark plug.
• Magnetic insert to retain spark plug.
• Application: BMW.
$32.15
13pc 1/4"Sq Drive Socket Sets - Black Series
• Magnetic plug retention and external hex.
• Sockets: 14, 16, 21mm, 16mm Thin-wall.
• Includes thin walled 16mm socket, for where clearance is tight.
$104.97
12pc 3/8"Sq Drive Socket Set - Black Series
• Manufactured from hardened and tempered high grade Chrome Vanadium steel.
• Fully polished black chrome finish for resistance to corrosion.
• Includes knurled ring for extra grip with oily fingers.
• Manufactured from hardened and tempered high grade Chrome Vanadium steel.
• Fully polished black chrome finish for resistance to corrosion.
• Includes knurled ring for extra grip with oily fingers. •
12pc 3/8"Sq Drive Deep Socket Set - Black Series
• Manufactured from hardened and tempered high grade Chrome Vanadium steel.
• Fully polished black chrome finish for resistance to corrosion. • Includes knurled ring for extra grip with oily fingers.
4pc 180mm Circlip Pliers Set
*Note: Knuckle joints are not covered by the lifetime guarantee and are treated as consumable items.
• Hardened and tempered Chrome Vanadium steel bar with high chrome finish.
• Long, slim style handle and spring loaded socket retention.
• Comfortable soft grip handle.
• Fully replaceable knuckle joint*.
3pc 280mm Needle Nose Pliers Set
$95.41
• Manufactured from hardened and tempered Chrome Vanadium steel.
• Spring loaded jaws and forged non-slip tips.
• Phosphate finish for corrosion resistance.
• Vinyl dipped handles for comfort and control.
• Capacities: 19-60mm each.
4pc Heavy-Duty Pry Bar Set with Hammer Cap
$147.28
• Manufactured from hardened and heat treated Chrome Vanadium steel.
• Finely ground heads with a fully polished finish.
• Serrated, machined jaws for a positive grip.
• Long, slim design ideal for use in areas with limited access.
• Vinyl dipped handles for comfort and control.
6-42V Open & Short DC Circuit Detector
• Find short and open circuits quickly and easily.
• Simply attach the sender unit to the circuit and follow the wires using the detector.
• Ideal for automotive repairs.
• Suitable for all DC circuits up to 42V.
• Supplied in storage case.
• Powered by two 9V batteries.
$171.85
$128.85
• Heavy-duty, angled shafts.
• Chrome Molybdenum steel with blackened finish.
• Comfortable soft grip handles with hammer cap.
• Contents: 200, 300, 460, 610mm.
2pc Trim Tool Set
• Rigid stainless steel shafts with a fully polished finish.
• U and V-profile tips simplify the removal of common types of trim stud and fixing, and reduce the risk of damage to surrounding trim.
• Comfortable grips with thumb stop and hanging hole.
$69.48
Mechanic’s Utility Seat - Hi-Vis Green
$179.03
• Steel framework with powder coated finish.
• Extra thick cushioned padding.
• Ø63mm Rubber castors with ball-bearing swivel.
• Composite storage tray.
$188.33
12pc Trim & Upholstery Tool Set
Under Dash Creeper Board
• Comprehensive set, designed to simplify trim and trim stud removal.
• Manufactured from resilient nylon to minimize panel damage and marking.
5pc 3/8" & 1/2"Sq Drive Oxygen Sensor & Thread Chaser Set
• Suitable for oxygen sensors found on most modern vehicles.
• Cut-out and slots enable sockets to be fitted over wiring harness.
2pc 1/2"Sq Drive Strut Leg Pry Socket Set
• Reduces risk of damage to hub casting.
• Includes two sizes of pry socket: 7 x 5mm and 8.2 x 5.5mm.
• Suitable for removal and installation of strut legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.
• Includes two chasers for cleaning and repairing damaged threads. $41.70
1.2m Telescopic Bonnet/Tailgate Support
• 3-Tier telescopic aluminium tailgate/bonnet support with tough rubber pads at each end.
• Lock in any position with a simple twist.
• Also used for holding open doors, depressing clutch, brake or accelerator pedals.
• Provides a comfortable work position for technicians who work under a vehicle dashboard.
• Adjustable height from 490mm to 665mm to accommodate cars, trucks and SUVs.
• Heavy-duty steel frame folds easily for storage.
• Includes 11 trim and upholstery tools, plus trim hammer in a heavy-duty storage pouch. $216.83
• Eases stress on back and neck while working under the dash.
100kg.
Tyre Tread Depth Gauge Pocket Type
• Chromed steel body with pocket-clip.
• Scale from 0-25mm in 1mm(0-1" in 1/32") graduations.
Fuel Feed Pipe Pliers
• Suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.
• Designed to compress the quick connect lugs for easy removal without damaging the connector.
Door Handle Removal Tool VAG
$66.27
5mm 3/8"Sq Drive Extra-Long Ball-End Hex Key - VAG
• Used to remove and install the exterior door handle.
• Suitable for a variety of VAG vehicles including VW Arteon, Atlas, Caddy, Passat, Tiguan, Touran, Audi Q2.
2pc Hose Clip Pliers Set
• Heavy-duty construction with PVC dipped handles for added comfort and grip.
• Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips.
• Pliers with ratchet locking mechanism for ease of use on lower radiator hoses.
• Swivel jaws allow use where access is confined.
• Length: 220mm.
$39.00
• Manufactured from Chrome Vanadium steel.
• Designed for easy-access on engine sump bolts.
• Suitable for a variety of VAG vehicles.
• Length: 235mm.
Door Lock Removal Tool VAG
$38.88
$57.97
Extra-Heavy-Duty Ear-Type Clip Pliers
• Used to remove and install the lock cylinder.
• Makes removing the hard-to-reach locking hook a simple operation.
• Suitable for a variety of VAG vehicles including VW Golf, Fox, Tiguan, Passat, Audi Q7.
Hose Clamp Removal Tool
$38.08
• For releasing HENN clamps used on coolant and turbo charger hoses.
• Applications: BMW, Citroen, Fiat, Ford, Kia, Lexus, Mazda, Mercedes, Nissan, Porsche, Peugeot, VAG, Vauxhall/Opel and Volvo.
$70.54
• Steel jaws with PVC coated handles for added comfort.
• Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions.
• Suitable for all ear-type CVJ boot clips.
• Length: 240mm.
$80.80
2pc Hose Removal Hook Set
• Useful 2-piece set with chrome finish shafts and comfort grip handles.
• Ideal for the removal of coolant hoses, O-rings and seals.
T-Handle Oil Drain Plug Key - VAG
• Designed specifically for the plastic sump plugs found on the VAG TFSi engines.
• Also designed for use on the cam cover of new 1.6 and 2.0 twin cam diesel VAG engines.
Wiper Arm Removal Tool
$43.56
5pc Engine Oil Funnel Set Audi, Seat, Skoda, Volkswagen
• Fastens and seals into the engine filler with three manufacturer specific adaptors.
• Covering a large proportion of modern vehicles for Audi, Seat, Skoda and Volkswagen.
• Hands-free operation with no mess or spills.
• Adaptors: 1; Knob Type - 39mm, 2; Clip Type - 38mm, 3; Ø45mm - Twist fitting.
4pc Engine Oil Funnel Set BMW, Mercedes-Benz
• Fastens and seals into the engine filler with two manufacturer specific adaptors.
• Covering a large proportion of modern vehicles for BMW and Mercedes-Benz.
• Hands-free operation with no mess or spills.
• Adaptors: 1; Ø51mm Twist Fitting, 2; Clip Type - 38mm.
• See instructions on www.sealey.co.uk for complete list of vehicle applications.
$38.08
• Features T-handle for quick operation. $130.90
Oil Filter Cap Remover - Ford/Jaguar/ Citroen/Peugeot 2.0D/2.2D Diesel
• Suitable for removing the cap from the oil filter housing on Ford, Citroen, Peugeot 2.0D/2.2D HDi/TDCi diesel engines (DW10C, DW12C) and Jaguar XF 2.2D from 2012 onwards.
• See instructions on www.sealey.co.uk for complete list of vehicle applications. $130.90
• Allows access to the hard-to-reach 27mm hex located on the filter cap.
5pc Ignition Coil Puller Set – VAG
• Suitable for installation/removal of ignition coils and separating the HT leads from deep-seated spark plugs on VAG vehicles.
• Long shafts with composite T-style handle for added control and stability.
• Prevents damage to ignition coils whilst allowing faster removal.
$135.04
1300 133 129 | hsy.com.au *Prices are valid at the time of printing and are subject to change without notice. HSY Code 8220 80 967
CVJ Impact Driver
• Designed to remove seized CV joint from hub assembly.
• Comfort grip handle and impact strike point allows fast effective method of loosening difficult contacts.
• Reversible guide head covering 21mm and 25mm provides stable alignment when striking the CV joint.
Heavy-Duty Wiper Arm Puller
Fuel Line Pliers - VAG
• Suitable for fuel lines on VAG group vehicles with sprung hose clips.
• Rotating jaws for easy-access to hose clips in confined spaces.
• Spring loaded jaws. $92.00
Adaptive Cruise Control Adjustment Tool - VAG
• For adjusting the adaptive cruise control (ACC) RADAR unit.
• Equivalent to VAG tool VAS6190/2.
• Manufactured from Chrome Vanadium with satin finish.
• Shaft Length: 230mm.
• Overall Length: 256mm.
Terminal Tool - VAG
• Heavy-duty construction with locking feature allowing secure fastening to the wiper arm before commencing pull.
• With swivel mounted thrust bearing and tommy bar, the tool releases the most stubborn wiper arms.
• Also suitable for battery terminal and alternator bearing removal.
• Max. Opening: 28mm.
• Max. Collar Size: 43mm.
3pc Terminal Cleaner Set Diamond Grip
• Suitable for removing corrosion and enhances connectivity of wiring terminals.
• Durable abrasive diamond cleaning ends, for male/female blade type terminal connectors.
• Features a pivoting handle to allow tweezer action or single blade use.
• Set contains three sizes of blade.
• Abrasive Coating Length: 30mm.
• Designed to remove terminals frequently used on many VAG group vehicles.
300mm Spark Plug Pliers
• Suitable for removal of spark plug boot on deep-seated engine applications.
• Composite handles provide insulation from HT shock and give added comfort and control.
10pc Petrol Engine Compression Test Kit
• Ø59mm Gauge fitted with 250mm hose and quick connect.
• Scale reads from 0-21bar(0-300psi).
• Includes four extension hoses and seven plug thread adaptors from 10 to 18mm.
• Suitable for most petrol engine cars and light commercials. $81.76
$368.41
Spark Plug Lead Tool - VAG
• Essential tool for spark plug removal.
• Separates the HT leads from the deep-seated spark plugs fitted to VAG vehicles.
• Length: 290mm.
$53.25
Flexible Magnetic Pick-Up Tool - 1.5kg Capacity
• Flexible chromed shaft with classic styled composite handle.
• Use with or without magnetic protection cap.
• 1.5kg Pick-up capacity from Ø10mm magnet.
• Length: 560mm. $47.85
Spring Hose Clip Pliers
• Spring loaded pliers, for fitting and removing hoses fitted with constant pressure type hose clips.
• Designed to be used front or side facing, making the tool fast and effective to use.
• Slots in 16mm jaws, locate and secure hose clip ends into position.
• Can also be used as a traditional set of pliers.
• Length: 205mm.
$89.65
Auxiliary Belt Tensioner Wrench
VAG 1.4 TSi/TFSi - Belt Drive
• Specially designed wrench to allow for access to the auxiliary belt tensioner where access is limited.
• For 1.4 direct injection 4-cylinder TSi and TFSi BlueMotion engines. $110.00
Ø40mm Telescopic Articulated Inspection Mirror
Twin Leg Bar Type Pullers
• Heavy-duty twin leg bar type pullers, suitable for easy removal of pulleys, flywheels, bearings and gears.
• Drop-forged Chrome Vanadium steel.
• Heat treated for added strength.
• Zinc plated for corrosion resistance.
• Thrust bearing prevents wear and damage to shaft.
610mm Flexible Claw Pick-Up Tool
$14.35
80mm 1/2"Sq Drive 18.5-19.5mm Double Ended Impact Socket
• Double ended 18.5/19.5mm, 80mm impact socket 1/2"Sq drive.
• Designed for easy removal of wheel bolts/ nuts with missing or distorted caps.
• Suitable for Ford, GM, Jeep, Chrysler. Thin-wall design to fit a wide range of applications.
• Black phosphate finish.
$59.20
5pc 80mm 1/2"Sq Drive Double Ended Impact Socket Set
• Chromium plated caps fitted to some wheel nuts are prone to swelling, making them incompatible with standard whole size sockets.
• Half sizes allow secure fitment for safe removal.
• Double ended 80mm impact sockets 1/2"Sq Drive 6-point.
• Sizes: 80mm Sockets; 18.5 x 19.5, 19 x 21, 21 x 21.5, 22 x 22.5mm, 1/2"Sq Drive Extension; 75mm (3").
• Black phosphate finish. $182.80
8pc Screwdriver Set - VDE Approved
• Chrome Vanadium steel shafts with magnetic and corrosion resistant tips.
• Fully insulated to VDE and EN 60900 standards to protect up to 1500V DC and 1000V AC.
• Ideal for technicians working on modern hybrid and electrical vehicles.
• Contoured, textured handles with non-slip comfort grip.
• Features hanging holes for easy storage.
• Contents: Slotted; 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150mm, Phillips; #1 x 80, #2 x 100, Pozi; #1
$72.00
Disc Brake Piston Spreader Tool
• Heavy-duty design with internal bearings and force screw action insures effortless and even force distribution.
• An essential tool for retracting the brake piston to allow insertion of new brake pads.
• Suitable for most 1, 2, 4 and 6 piston configurations found on ATE, Bendix, Brembo, Delco and Girling calipers.
• Black Phosphate finish.
• Maximum Spread: 120mm.
$400.00
• Thin wall design for use when plug clearance is tight.
• 12 Point 3/8"Sq drive 14mm standard depth socket.
• Magnetic insert to retain spark plug.
• Universal joint for ease of access.
• Chrome vanadium alloy hardened and heat treated steel. $80.10
3pc Pliers Set - VDE Approved
• Induction-hardened cutting edges.
• Soft grip handles for comfort and control.
• Ideal for technicians working on modern hybrid and electrical vehicles.
• Cutting Capacities: Ø1.8, Ø2, Ø2mm. $124.00
19pc Hybrid & Electric Vehicle Battery Tool Kit
• Hardened and tempered Chrome Vanadium steel sockets, ratchet wrench, spanners and accessories.
• Chrome plated for resistance to corrosion.
• Sockets, ratchet wrench, spanners and bit holder fully insulated to IEC 60900 Category C standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Ideal for use on hybrid and electric vehicles.
6pc Extra-Long Hex Key Set - VDE Approved
7pc Insulated Open-End Spanner Set VDE Approved
• Manufactured from heat treated and hardened S2 steel with a chemically blackened finish for resistance to corrosion.
• Keys range in length from 135mm to 215mm and in size from 2.5mm to 8mm.
• Fitted with PP/TPR handles, fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Contents: 2.5, 3, 4, 5, 6, 8mm.
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Also suitable for electricians and other trades (1000V AC safe live working).
9pc Extra-Long TRX-Star* Key Set VDE Approved
$121.00
• Manufactured from hardened and tempered Chrome Vanadium steel.
• Each spanner is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Sizes: 8, 10, 12, 13, 14, 17, 19mm.
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Also suitable for electricians and other trades (1000V AC safe live working).
9pc 3/8"Sq Drive Insulated Socket Set VDE Approved
• Manufactured from heat treated and hardened S2 steel with a chemically blackened finish for resistance to corrosion.
• Keys range in length from 135mm to 215mm and in size from T10 to T50.
• Fitted with PP/TPR handles, keys are fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Contents: T10, T15, T20, T25, T27, T30, T40, T45, T50.
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Also suitable for electricians and other trades (1000V AC safe live working). $137.50
3pc Insulated Cutting Set with Tool Tray - VDE Approved
• Each component is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Set of three insulated cutting tools including cable knife, scissors, and heavy-duty pliers.
• Cable knife with 50mm durable stainless-steel blade for efficient cable stripping whilst providing protection to internal wiring.
• Supplied with soft grip handles for comfort and control.
• Chrome plated for resistance to corrosion.
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Supplied in EVA foam storage tray. Includes parts tray cut-out.
• Tray Size (W x D x H): 175 x 395 x 30mm.
• Hardened and tempered Chrome Vanadium steel sockets and accessories.
• Each component is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Contents: Sockets; 8, 10, 12, 13, 14, 17, 19mm, Comfort Grip Ratchet Wrench with Push-Button Quick Release, 100mm Extension Bar.
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Also suitable for electricians and carpenters (1000V AC safe live working).
$225.50
3-48V Integrated Test Light/Voltmeter
• Identifies polarity of circuit being tested on LCD display, red for positive and green for negative.
• LCD meter draws minute currents making this tool safe to use around delicate electronic components.
• With a range of 3-48V DC, this tool is suitable for motorcycle, car, hybrid and commercial vehicles.
• Supplied with 3m coiled cable and insulated crocodile earth clamp.
• Do not use on air bags.
Collapsible Magnetic Parts Tray - Set of 3
• Manufactured from oil resistant silicone.
• Trays collapse down making them easy to store.
• Inside of the trays are fully magnetic, ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly.
• Soft silicone base for added grip and less chance of scratching surfaces.
• Open dimensions - Large Tray (W x D x H); 280 x 180 x 60mm, Medium Tray (W x D x H); 150 x 130 x 50mm, Small Tray (W x D x H); 130 x 80 x 50mm.
• Folded dimensions - Large Tray (W x D x H); 280 x 180 x 30mm, Medium Tray (W x D x H); 150 x 130 x 20mm, Small Tray (W x D x H); 130 x 80 x 20mm.
$80.50
Ø150mm Magnetic Collectors
Ball Joint Splitter
• Forged steel body with chemically blackened thrust and adjustment screws for corrosion resistance. •
Pneumatic Glove Tester
• Pneumatic glove tester used to carry out a pressure test on electrician’s high voltage gloves. $770.00
• ABS Plastic collectors with Ø80mm magnet in non-marking cover.
• Suitable for storing nuts, bolts, screws, washers and other small parts during disassembly/assembly.
• Attaches to any ferrous surface and is ideal for use on toolboxes.