9pc Hammer-Thru Screwdriver Set
• High quality Chrome Vanadium steel satin finished shafts with shot blasted and magnetized tips.
• Features hexagonal bolster for use with a wrench.
• Contoured, textured soft-grip handles with hammer caps.
6pc Extra-Long Pick & Hook Set
$174.25
Ball Joint Splitter
3-48V Integrated Test Light/Voltmeter
• Identifies polarity of circuit being tested on LCD display, red for positive and green for negative.
• LCD meter draws minute currents making this tool safe to use around delicate electronic components.
• With a range of 3-48V DC, this tool is suitable for motorcycle, car, hybrid and commercial vehicles.
• Supplied with 3m coiled cable and insulated crocodile earth clamp.
• Do not use on air bags.
$129.54
74pc 3/8" & 1/2"Sq Drive TRX-Star*/ Security TRX-Star*/Hex/Ribe/Spline Bit Set
• Six long reach picks with black finished steel shafts.
• Contents: Straight, Right Angle, Half-Round, Swan Neck, 45°/ 90° Tip, 40°/45° Tip.
• Suitable for pin/clip picking and the removal of O-rings and seals.
• Length: 235mm. $59.54
Twin Leg Bar Type Pullers
• Forged steel body with chemically blackened thrust and adjustment screws for corrosion resistance.
• Fully adjustable.
• Jaw Width: 20mm.
• Heavy-duty twin leg bar type pullers, suitable for easy removal of pulleys, flywheels, bearings and gears.
• Drop-forged Chrome Vanadium steel.
• Heat treated for added strength.
• Zinc plated for corrosion resistance.
• Thrust bearing prevents wear and damage to shaft. *Prices
• High quality S2 steel bits with a zinc phosphate finish, each size in 30 and 75mm lengths.
• Hardened (58-62 HRC) and tempered for added strength.
• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.
• Supplied in storage case with inclined tray for quick and easy bit selection.
Washer Jet Tool
• Compact, double end tool with pocket-clip.
• Screwed caps house a pointed scribe for cleaning and clearing washer jets at one end and finer probe for adjusting position of jets at the other.
• Heavily knurled body for sure handling.
• Overall Length: 104mm.
1/2"Sq Drive Extra-Long Spline Socket Bits
• Save valuable time and loosen drive shaft screws from the outside.
• Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel sockets.
• Chrome plated with satin finish.
• Knurled ring on socket for secure handling.
5pc TRX-Star* Double End Spanner Set
• Manufactured from drop-forged Chrome Vanadium steel.
• Hardened and tempered with a fully polished mirror finish for resistance to corrosion.
• Five spanners covering 10 sizes of TRX-Star* fixings.
• Sizes: E6 x E8, E10 x E12, E14 x E16, E18 x E20, E22 x E24.
• Supplied in EVA storage tray.
$81.08
15pc 1/4"Sq Drive Low Profile Socket Set Platinum Series
HSYCode822080951
• Manufactured from hardened and tempered Chrome Vanadium steel with a micro satin finish.
• Low profile 6-point WallDrive® sockets.
• S2 Steel spline bit extension with phosphate coating. $115.75
7pc Extra-Long Double End Ring Spanner Set
• Extra-long, drop-forged, Chrome Vanadium steel 12-point WallDrive® ring spanners.
• Hardened, tempered and chrome plated with a fully polished mirror finish. •
$262.62
27pc Master Hex Key Set
• Low profile 90-tooth pear-head ratchet with super slim handle.
• Features flip reverse and quick release mechanism.
Ø57-120mm Swivel Jaw Filter Pliers
• Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters.
• Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control. •
Telescopic Magnetic Pick-Up Tool
4pc 3/8"Sq Drive Spark Plug Socket Set Magnetic
• Forged, Chrome Vanadium steel, 3/8"Sq drive WallDrive® sockets, polished chrome finish.
• Heavy-duty 7-section magnetic pick-up tool.
• Textured grip and pocket-clip.
• Ø10mm Magnet gives 1.6kg capacity.
• Minimum/Maximum Length: 175/880mm.
14mm 3/8"Sq Drive 12-Point Spark Plug Socket with Magnetic Retainer
• Designed for use where plug clearance is tight.
• Standard depth, thin wall, 12-point 3/8"Sq drive 14mm socket with magnetic insert to retain spark plug.
• Magnetic insert to retain spark plug.
• Application: BMW.
$32.15
13pc 1/4"Sq Drive Socket Sets - Black Series
• Magnetic plug retention and external hex.
• Sockets: 14, 16, 21mm, 16mm Thin-wall.
• Includes thin walled 16mm socket, for where clearance is tight.
$104.97
12pc 3/8"Sq Drive Socket Set - Black Series
• Manufactured from hardened and tempered high grade Chrome Vanadium steel.
• Fully polished black chrome finish for resistance to corrosion.
• Includes knurled ring for extra grip with oily fingers.
• Manufactured from hardened and tempered high grade Chrome Vanadium steel.
• Fully polished black chrome finish for resistance to corrosion.
• Includes knurled ring for extra grip with oily fingers. •
12pc 3/8"Sq Drive Deep Socket Set - Black Series
• Manufactured from hardened and tempered high grade Chrome Vanadium steel.
• Fully polished black chrome finish for resistance to corrosion. • Includes knurled ring for extra grip with oily fingers.
4pc 180mm Circlip Pliers Set
*Note: Knuckle joints are not covered by the lifetime guarantee and are treated as consumable items.
• Hardened and tempered Chrome Vanadium steel bar with high chrome finish.
• Long, slim style handle and spring loaded socket retention.
• Comfortable soft grip handle.
• Fully replaceable knuckle joint*.
3pc 280mm Needle Nose Pliers Set
$95.41
• Manufactured from hardened and tempered Chrome Vanadium steel.
• Spring loaded jaws and forged non-slip tips.
• Phosphate finish for corrosion resistance.
• Vinyl dipped handles for comfort and control.
• Capacities: 19-60mm each.
4pc Heavy-Duty Pry Bar Set with Hammer Cap
$147.28
• Manufactured from hardened and heat treated Chrome Vanadium steel.
• Finely ground heads with a fully polished finish.
• Serrated, machined jaws for a positive grip.
• Long, slim design ideal for use in areas with limited access.
• Vinyl dipped handles for comfort and control.
6-42V Open & Short DC Circuit Detector
• Find short and open circuits quickly and easily.
• Simply attach the sender unit to the circuit and follow the wires using the detector.
• Ideal for automotive repairs.
• Suitable for all DC circuits up to 42V.
• Supplied in storage case.
• Powered by two 9V batteries.
$171.85
$128.85
• Heavy-duty, angled shafts.
• Chrome Molybdenum steel with blackened finish.
• Comfortable soft grip handles with hammer cap.
• Contents: 200, 300, 460, 610mm.
2pc Trim Tool Set
• Rigid stainless steel shafts with a fully polished finish.
• U and V-profile tips simplify the removal of common types of trim stud and fixing, and reduce the risk of damage to surrounding trim.
• Comfortable grips with thumb stop and hanging hole.
$69.48 8220 80 980
Mechanic’s Utility Seat - Hi-Vis Green
$179.03
• Steel framework with powder coated finish.
• Extra thick cushioned padding.
• Ø63mm Rubber castors with ball-bearing swivel.
• Composite storage tray.
$188.33
12pc Trim & Upholstery Tool Set
Under Dash Creeper Board
• Comprehensive set, designed to simplify trim and trim stud removal.
• Manufactured from resilient nylon to minimize panel damage and marking.
5pc 3/8" & 1/2"Sq Drive Oxygen Sensor & Thread Chaser Set
• Suitable for oxygen sensors found on most modern vehicles.
• Cut-out and slots enable sockets to be fitted over wiring harness.
2pc 1/2"Sq Drive Strut Leg Pry Socket Set
• Reduces risk of damage to hub casting.
• Includes two sizes of pry socket: 7 x 5mm and 8.2 x 5.5mm.
• Suitable for removal and installation of strut legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.
• Includes two chasers for cleaning and repairing damaged threads. $41.70
1.2m Telescopic Bonnet/Tailgate Support
• 3-Tier telescopic aluminium tailgate/bonnet support with tough rubber pads at each end.
• Lock in any position with a simple twist.
• Also used for holding open doors, depressing clutch, brake or accelerator pedals.
• Provides a comfortable work position for technicians who work under a vehicle dashboard.
• Adjustable height from 490mm to 665mm to accommodate cars, trucks and SUVs.
• Heavy-duty steel frame folds easily for storage.
• Includes 11 trim and upholstery tools, plus trim hammer in a heavy-duty storage pouch. $216.83
• Eases stress on back and neck while working under the dash.
• Maximum Capacity: 100kg.
Tyre Tread Depth Gauge Pocket Type
• Chromed steel body with pocket-clip.
• Scale from 0-25mm in 1mm(0-1" in 1/32") graduations.
Fuel Feed Pipe Pliers
• Suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.
• Designed to compress the quick connect lugs for easy removal without damaging the connector.
Door Handle Removal Tool VAG
$66.27
5mm 3/8"Sq Drive Extra-Long Ball-End Hex Key - VAG
• Used to remove and install the exterior door handle.
• Suitable for a variety of VAG vehicles including VW Arteon, Atlas, Caddy, Passat, Tiguan, Touran, Audi Q2.
2pc Hose Clip Pliers Set
• Heavy-duty construction with PVC dipped handles for added comfort and grip.
• Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips.
• Pliers with ratchet locking mechanism for ease of use on lower radiator hoses.
• Swivel jaws allow use where access is confined.
• Length: 220mm.
$39.00
• Manufactured from Chrome Vanadium steel.
• Designed for easy-access on engine sump bolts.
• Suitable for a variety of VAG vehicles.
• Length: 235mm.
Door Lock Removal Tool VAG
$38.88
$57.97
Extra-Heavy-Duty Ear-Type Clip Pliers
• Used to remove and install the lock cylinder.
• Makes removing the hard-to-reach locking hook a simple operation.
• Suitable for a variety of VAG vehicles including VW Golf, Fox, Tiguan, Passat, Audi Q7.
Hose Clamp Removal Tool
$38.08
• For releasing HENN clamps used on coolant and turbo charger hoses.
• Applications: BMW, Citroen, Fiat, Ford, Kia, Lexus, Mazda, Mercedes, Nissan, Porsche, Peugeot, VAG, Vauxhall/Opel and Volvo.
$70.54
• Steel jaws with PVC coated handles for added comfort.
• Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions.
• Suitable for all ear-type CVJ boot clips.
• Length: 240mm.
$80.80
2pc Hose Removal Hook Set
• Useful 2-piece set with chrome finish shafts and comfort grip handles.
• Ideal for the removal of coolant hoses, O-rings and seals.
T-Handle Oil Drain Plug Key - VAG
• Designed specifically for the plastic sump plugs found on the VAG TFSi engines.
• Also designed for use on the cam cover of new 1.6 and 2.0 twin cam diesel VAG engines.
Wiper Arm Removal Tool
• Cast housing with ball-end thrust bolt for the fast and safe removal of taper mounted windscreen wiper arms.
$43.56
5pc Engine Oil Funnel Set Audi, Seat, Skoda, Volkswagen
• Fastens and seals into the engine filler with three manufacturer specific adaptors.
• Covering a large proportion of modern vehicles for Audi, Seat, Skoda and Volkswagen.
• Hands-free operation with no mess or spills.
• Adaptors: 1; Knob Type - 39mm, 2; Clip Type - 38mm, 3; Ø45mm - Twist fitting.
4pc Engine Oil Funnel Set BMW, Mercedes-Benz
• Fastens and seals into the engine filler with two manufacturer specific adaptors.
• Covering a large proportion of modern vehicles for BMW and Mercedes-Benz.
• Hands-free operation with no mess or spills.
• Adaptors: 1; Ø51mm Twist Fitting, 2; Clip Type - 38mm.
• See instructions on www.sealey.co.uk for complete list of vehicle applications.
$38.08
• Features T-handle for quick operation. $130.90
Oil Filter Cap Remover - Ford/Jaguar/ Citroen/Peugeot 2.0D/2.2D Diesel
• Suitable for removing the cap from the oil filter housing on Ford, Citroen, Peugeot 2.0D/2.2D HDi/TDCi diesel engines (DW10C, DW12C) and Jaguar XF 2.2D from 2012 onwards.
• See instructions on www.sealey.co.uk for complete list of vehicle applications. $130.90
• Allows access to the hard-to-reach 27mm hex located on the filter cap.
• Use with 1/2"Sq drive wrench.
5pc Ignition Coil Puller Set – VAG
• Suitable for installation/removal of ignition coils and separating the HT leads from deep-seated spark plugs on VAG vehicles.
• Long shafts with composite T-style handle for added control and stability.
• Prevents damage to ignition coils whilst allowing faster removal.
$135.04
Heavy-Duty Wiper Arm Puller
Adaptive Cruise Control Adjustment Tool - VAG
• For adjusting the adaptive cruise control (ACC) RADAR unit.
• Equivalent to VAG tool VAS6190/2.
• Manufactured from Chrome Vanadium with satin finish.
• Shaft Length: 230mm.
• Overall Length: 256mm.
• Heavy-duty construction with locking feature allowing secure fastening to the wiper arm before commencing pull.
• With swivel mounted thrust bearing and tommy bar, the tool releases the most stubborn wiper arms.
• Also suitable for battery terminal and alternator bearing removal.
• Max. Opening: 28mm.
• Max. Collar Size: 43mm.
3pc Terminal Cleaner Set Diamond Grip
• Suitable for removing corrosion and enhances connectivity of wiring terminals.
• Durable abrasive diamond cleaning ends, for male/female blade type terminal connectors.
• Features a pivoting handle to allow tweezer action or single blade use.
• Set contains three sizes of blade.
• Abrasive Coating Length: 30mm.
• Designed to remove terminals frequently used on many VAG group vehicles.
300mm Spark Plug Pliers
• Suitable for removal of spark plug boot on deep-seated engine applications.
• Composite handles provide insulation from HT shock and give added comfort and control.
10pc Petrol Engine Compression Test Kit
• Ø59mm Gauge fitted with 250mm hose and quick connect.
• Scale reads from 0-21bar(0-300psi).
• Includes four extension hoses and seven plug thread adaptors from 10 to 18mm.
• Suitable for most petrol engine cars and light commercials.
