1-888-840-1555, 4 Method to Fix HP Printer Error E3 Error,

4 Method to Fix HP Printer Error E3 Error.

Initially, check the Hp Officejet 3630 printers for jammed paper. To solve the HP E3 error, press the power button to switch on the printer. Then open the HP printer’s external door. To remove the ink cartridges from the holes, gently click them.

After that, inspect the cartridge for any issues before gently inserting it into the slot. Close the inkjet printer access door after that.

What does the E3 error code mean in the HP Desk Jet 3630 printer?

The E3 error code in the HP Deskjet 3630 printer refers to a carriage jam, which may suggest a paper jam. Finally, the flashing error light, paper error light, ink warning light, and Restart light can all be used to recognize the error.

How to Solve e3 error code in HP Printer Method 1: Clear the Clogged Document

The jammed paper can be removed from one of four places.

Examine any areas where the paper can become stuck, and then try to remove it. Try printing the paper again now.

Clear the jammed paper from the output tray, input tray, printer base, and ink cartridge access area. If the error persists after you have removed the jammed paper from all sides, you must proceed to the next stage to resolve E3 error code.

Method 2: Remove the cartridges and reinstall The HP them printer error e3 code can be caused by installing the

cartridges incorrectly or incorrectly. Remove and reinstall the ink cartridges to ensure that they are mounted correctly. Now go ahead and print another one.

•Click the power button to turn on the printer.

•Open the outside door.

•After that, you must open the access door to the ink cartridges.

•The carriage with the ink cartridge would be transferred to the printer’s canter. Wait for it to become inactive.

•To release the ink cartridges, gently press them downwards.

•To address printer error e3, remove the cartridge from its slot and pull it in your direction.

•Place the cartridges in the empty slot and press down on each one until it snaps.

•Close the access door first, then the exterior door.

Method 3. Connect the printer’s wire to the power source.

•Remove the printer wire from the printer’s hand.

•Surge suppressors should be disconnected from the power line.

•Now, to repair printer error e3 code, connect your printer’s power cable directly to the power source.

•After that, attach the power cable to the printer’s side.

•Start the printer now.

•If the problem still exists, you can proceed to the next level.

https://customer-supportnumbers.com/hp-printer-error-e3/

Method 4 Reset the printer •If your printer is not turned on, switching it on.

•Wait for the printer to reach a state of inactivity.

•Disconnect the wire from the side of your printer after it has been turned on.

•Remove the main printer cable from the power supply.

•Wait a minute before reconnecting it to the power supply.

•After that, attach the power cable to the printer’s side.

•If the printer does not turn on automatically, turn it on.

After that, you can use your printer to print. If the HP printer error e3 persists, the printer should be serviced. We hope the above solution was helpful in resolving your HP printer E3 mistake or you can take help to our printer toll free number.

Toll-Free

Call+1-888-840-1555 https://customer-supportnumbers.com/hp-printer-error-e3/