HP Officejet 7510 Printer Unboxing Setup • • • • • • •
Remove the printer from the box. Remove tape, stickers, and packaging material from the printer. Take away the protective film from the control panel. Install the input tray by lining up the input tray extender with the input tray. Slide in the input tray extender until it locks into place. Place the output tray at the top of the extender and push forward until it fits into place. Open the scanner lid to remove the package materials beneath and close it.
HP Officejet 7510 Setting up Preferences and Load Papers
• • • • • • • • •
Connect your printer to a non-fluctuating power source. Plug the power cord to the backside of the printer and then plug the other end into an electrical outlet. Press the Power button and switch on your 123.hp.com printer. Open the Printer’s control panel, select your preferred language in the Language option and tap the Continue option. Lift the output tray and take out the paper width guides then pull out the input tray and extend it to the desired paper size. Load plain A4 paper into the input tray. Load a pile of sheets in portrait orientation with the print-side facing down. Slide in the paper until it stops and move the paper-width towards the paper. Pull the output tray extension outwards and then lift the paper catch.
How to Install HP Officejet 7510 Ink Cartridge? • • • • • •
Open the ink cartridges access door by pulling the cartridge door forward. Wait until the carriage becomes idle and silent. Find the ink cartridges and remove the tape and other packing materials. Do not remove any other tapes or copper coated materials from the cartridges. Clean your hands and clothing if it is stained by the printer ink. Hold the HP Officejet 7510 Setup printer ink cartridges on its sides facing towards the printer.