Quick HP Envy 5530 Wireless Setup
• • • • • • • • • •
•
• • • •
Install the HP Envy 5530 printer drivers on your laptop before initializing the Wireless setup process. Turn on your HP printer and navigate to the Control Panel settings. Scroll down the page and then select the Wireless Settings tab. Select the Wireless Setup Wizard option and wait for a few seconds. The Setup Wizard activates the printer’s Wi-Fi automatically. After initializing, a list of networks available within the printer’s Wi-Fi range appears on the printer’s LED display. Activate your router that is connected to a Wireless Access Point. Ensure that the internet connection on the WAP is active. Test the internet connection speed and signal strength by linking the router with your mobile device. Deactivate all the other wireless networks within the printer’s Wi-Fi range to avoid connection problems. If the auto-connect mode is turned on, the printer connects to your wireless network automatically. If the auto-connect mode is not available or turned off, a list of available networks appears on the printer’s screen. Browse through the list and then select the desired network. If your network is encrypted with a password (WPA/WEP key), gather the network password from the router’s manual. Type the password on the printer’s control panel and tap OK. After the wireless network connection is established successfully by getting steps for How to Setup HP Envy 5530 Printer Wireless, the printer displays a notification stating that the connection is successful. The Wireless light on the printer turns from orange to blue color. Load the printer’s input tray. Navigate to the Setup menu on your 123.hp.com printer. Go through the menu and select the Network Setup option. Tap OK when prompted. Select the Print Network Configuration Page option from the results. Select Yes on in the pop-up window and the printer prints the network configuration page.