D 008 03 price list gb 2017 (compleet) by Jet Thruster

Manufactured by Holland Marine Parts B.V.

Price list

G OUR INCLUDIN THRUSTER NEW JET T SYSTEM COMPAC

2017

170

160

110

20,5

241,5

110

20,5

234,2

www.jetthruster.com

139,3

200

226,3

170

236,1

160

105,3

200

226,3

273,7

150

75,8

150

75,8

236,1

8,5

162,5

8,5

162,5

Pump units, 3-Way valves, Water inlet, Nozzles, Joystick, Remote and more D-008-03 All our products are manufactured according to CE regulations. We keep the rights to change descriptions, graphs or statements, which are required for technical development of our Jet Thruster systems.

All prices ex. VAT

D-008-03

Holland Marine Parts

Thank you for your interest in the Jet Thruster System.

Jet Thruster Systems for sail and motor yachts are by far the easiest and most flexible thruster systems available and due to their unique design and flexible siting of components can be fitted to virtually any boat. As few boats are the same each Jet Thruster installation can be tailored to your individual requirements. Although we have suggested a standard series of Installation Kits it is possible to add or deduct components from these and any parts can be ordered or re-ordered with the use of this catalogue Installation Kits for each size of Jet Thruster are listed with the individual items that may be required.

How to select the required Jet Thruster System and its components: - Calculate the required thrust force for your boat with our online calculator at www.jetthruster.com -

Go to Page 5 of this catalog for: Jet Thruster Single: A Thruster system for Bow OR Stern

- Go to page 7 of this catalog for: Jet Thruster Combi: A Thruster system for Bow AND Stern - Complete all steps to ensure the necessary parts are selected - Read more about the installation kits, which are mentioned for each system setup. - Select additional (electrical) components such as batteryâ&#x20AC;&#x2122;s or Series Parallel-Switches

Select a Jet Thruster Dealer at our website www.jetthruster.com

Preferred / Recommended products

express

Holland Marine Parts

D-008-03

All prices ex. VAT

TABLE OF CONTENTS

Page:

Exploded views & component selection JT-30, JT-50, JT-70 and JT-90 Single . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Exploded views & component selection JT-30, JT-50, JT-70 and JT-90 Combi . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Exploded views & component selection JT-30, JT-50, JT-70 and JT-90 Vertical . . . . . . . . . . . . . . . . . . . . . . . . 8-11 Pump units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3-way valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Inlet side combinations & parts and options pressure side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Jet Thruster controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 Standard installation kit JT30 / JT50 Single. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT30 / JT50 Single (Aluminium boats). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT30 / JT50 Combi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT30 / JT50 Combi (Aluminium boats). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT70 / JT90 Single. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT70 / JT90 Single (Aluminium boats). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT70 / JT90 Combi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT70 / JT90 Combi (Aluminium boats). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16-17 18-19 20-21 22-23 24-25 26-27 28-29 30-31

SKI Boat / Shallow Draft retro fit kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33 Inlet side combinations Jet Thruster Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Standard installation kit JT30 / JT50 Vertical Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT30 / JT50 Vertical Combi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT30 / JT50 Vertical Single Aluminium boats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard installation kit JT30 / JT50 Vertical Combi Aluminium boats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35 36 37 48

Standard installation kit JT70 / JT90 Vertical Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Standard installation kit JT70 / JT90 Vertical Combi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Pump outlet for pump units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Hoses / hose clamps pressure side & Hose connectors / ball valve pressure side. . . . . . . . . . . . . . . . . . . . . . . . 42 Nozzles, weldable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Nozzles SS316 flanged treaded, non weldeable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Fittings Water intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Miscellaneous parts flanged treaded nozzles / 900 transom nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-50 Jet Thruster pump units & specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Terms and conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

All prices ex. VAT

D-008-03

Holland Marine Parts

JT-30 / JT-50 SINGLE (bow or stern) JTS-30-Compact I-309-00 I-307-00

V-100-50 I-317-00 I-114-00 I-310-00

I-312-00

I-113-00

I-308-00

I-318-00

I-115-00

I-302-00

I-316-00

STER JET THRU T SYSTEM COMPAC

JT-70 / JT-90 SINGLE (bow or stern)

Pumpunit JTS-30-Compact 3-Way valve Water inlet 3” BSP Ring 3” BSP Nut 3” BSP Seal, rubber Elbow 900 3” BSP Reducer 3”/2,5” BSP Ball valve 2,5” BSP Hose connector 3”/76mm Hose clamp

I-302-00 I-303-00 I-304-00 I-306-00 I-307-00 I-308-00 I-309-00 I-310-00 I-331-00

Pumpunit JT-70 / JT-90* 3-Way valve

JTS-70-00 / JTS-90-00 V-200-50

Water inlet 4” BSP Ring 4” BSP Nut 4” BSP Seal, rubber Elbow 900 4” BSP Ball valve 4” BSP Hose connector 4”BSP Hose clamp

I-267-00 I-272-00 I-273-00 I-274-00 I-271-00 I-269-GF I-275-00 I-270-02

V-100-50 Hose 3”/76mm / L=1m/3.3ft Pressure hose 2”/51 mm Hose clamp Elbow 450 2” BSP M/F Hose connector Ball valve 2” BSP Nozzles (steel) Controller

I-312-00 I-113-00 I-114-00 I-316-00 I-115-00 I-317-00 I-318-00 E-300-00

Hose 4”/114mm / L=1m/3.3ft I-268-01 Pressure hose 3” / 76 mm I-213-00 Hose clamp I-331-00 Elbow 450 2” BSP M/F I-316-00 Hose connector I-115-00 76mm- 2” BSP I-215-00 Ball valve 2” BSP I-317-00 Nozzles (steel) I-318-00 Controller E-300-00

Pumpunit JTC-90-00

I-317-00 / I-331-00

V-200-50

I-213-00 I-275-01

I-316-00

I-267-00

I-269-GF I-336-00 I-261-00

Holland Marine Parts

D-008-03

All prices ex. VAT

SELECT COMPONENTS JET THRUSTERS SINGLE: BOW OR STERN

Select a pump unit with 3-way valve

30KGF

50KGF

70KGF

90KGF

JT-30 12V

JT-50 24V

JT-70 24V

JT-90 24V

Pump unit

€ 1.712.-

€ 2.090.-

€ 3.048.-

€ 3.367.-

€ 493.-

€ 645.-

Basic installation Kit

€ 1.659.- page 16-17

€ 2.140.- page 24-25

Basic installation Kit aluminium boats (nozzles incl.)

€ 2.157.- page 18-19

€ 2.840.- page 26-27

❏

3-Way Valve

❏ Select the desired pump head position (pump head must be under waterline) pos. 1

pos. 2

pos. 1

pos. 2

Note: All 24V Jet Thruster systems can be installed in a 12V circuit with the series parallel switch and dedicated batteries.

❏ JT-70 / JT-90

� 131.-

❏ JT-30 / JT-50

❏ JT-70 / JT-90

110 4,3 148 5,8

❏ 250

❏ 350

❏ 450

}

JT-70 / JT-90 (* € 95.- deduction to installation kit) Elbow 450 4” M/F (2X) I-272-00 ❏ � 230.-

❏ � 22.-

❏ . . . . . m � 30,50 p/m

Ø 3” / 76 mm

160 6,3

334,8 13,2

� 250.- (2 pcs)

❏ 650

148 5,8

❏ .....m � 36,50 p/m

� 66.- (2 pcs)

� 190.- (2 pcs)

� 150.- (2 pcs)

175 6,9

❏ transom 900

❏ steel

7 JT 30 12V 1x ❏ JT 50 24V 2x ❏ JT 70 24V 4x ❏ JT 90 24V 4x ❏

Pump outlet

� 306.� 612.� 612.� 1.224.-

Packaging costs 1 euro pallet; � 110.-* * See page 52

Incoterms: Ex. works Donker Duyvisweg 297 Dordrecht, The Netherlands

❏ SS316

❏ aluminum

Zinc anode JT70 / JT90 Pump inlet or

Removes excessive poly-urethane sealant easily

Option for water intake combination, available at extra cost: 2 x 450 elbow instead of standard provided 900 elbow*

Wet wipes Tissues

❏ 55

Ø 2” / 51 mm

175 6,9

188 7,4

JT-30 / JT-50 (* € 60.- deduction to installation kit) I-354-00 Elbow 450 3” F/F ❏ � 133.Elbow 450 3” M/F I-364-00

155,3 6,1

188 7,4

❏ 00

344 13,5

332,3 13,1

Select a set of nozzles, see page 44 � 170.- (2 pcs) � 190.- (2 pcs) � 210.- (2 pcs) � 220.- (2 pcs) � 250.- (2 pcs) � 330.- (2 pcs) 155 6,1

Hose JT-70 / JT-90

11 0,4

� 60.-

110 4,3

� 110.-

300 11,8

� 18.-

115 4,5

Hose JT-30 / JT-50 300 11,8

110 4,3

Select hose length

115 4,5 573 22,6

110 4,3

573 22,6

Pump outlet on pump unit (1 necessary for each installation).

344 13,5

❏ JT-70 / JT-90

75 3

❏ JT-30 / JT-50

Select a pump outlet

11 0,4

❏ JT-30 / JT-50

❏ � 175.-

❏ � 195.-

1. Pump :

€ . . . . . . . . . . . . . . . . . . . . . . . .

Valve:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Installation kit:

€ . . . . . . . . . . . . . . . . . . . . . . . .

2. Pump outlet:

€ . . . . . . . . . . . . . . . . . . . . . . . .

3. Hose:

€ . . . . . . . . . . . . . . . . . . . . . . . .

4. Nozzles:

€ . . . . . . . . . . . . . . . . . . . . . . . .

5. Alternative elbows: € . . . . . . . . . . . . . . . . . . . . . . . . 6. Batteries:

€ . . . . . . . . . . . . . . . . . . . . . . . .

7. Zinc anode:

€ . . . . . . . . . . . . . . . . . . . . . . . .

8. Wipes:

€ . . . . . . . . . . . . . . . . . . . . . . . .

9. Packaging:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Complete system €: All prices ex. VAT

D-008-03

. . . . . . . . . . . . . . . . . . . . . . . .

Holland Marine Parts

JT-30 / JT-50 COMBI STER JET THRU T SYSTEM C A P M O C

BOW AND STERN

Option 1:

Option 2a: + Option 2b:

P-507-52

Pumpunit JT-30 / JT-50 2-Way pump outlet 3-Way valve

JTC-30-Compact / JTC-50-Compact P-155-00 V-101-50

Water inlet 3” BSP Ring 3” BSP Nut 3” BSP Seal Rubber Elbow 900 3” BSP Reducer 3”/2,5” BSP Ball valve 2,5” BSP Hose connector 3”/76mm Hose clamp

I-302-00 I-303-00 I-304-00 I-306-00 I-307-00 I-308-00 I-309-00 I-310-00 I-331-00

Hose 3”/76mm / L=1m/3.3ft Pressure hose 2”/51mm Hose clamp Elbow 450 2” BSP M/F Hose connector Ball valve 2” BSP Nozzles (steel) Controller

I-312-00 I-113-00 I-114-00 I-316-00 I-115-00 I-317-00 I-318-00 E-300-00

V-100-50

I-113-00

I-114-00

Pumpunit JT30/JT50 I-311-00

I-307-00 I-310-00

I-309-00

I-316-00

I-115-00

I-302-00 I-317-00 I-336-00

JT-70 / JT-90 COMBI Pumpunit JT-70 / JT-90* 2-Way pump outlet 3-Way valve

JTC-70-00 / JTC-90-00 P-259-00 V-200-50

Water inlet 4” BSP Ring 4” BSP Nut 4” BSP Seal Rubber Elbow 900 4” BSP Ball valve 4” BSP Hose connector 4” BSP Hose clamp

I-267-00 I-272-00 I-273-00 I-274-00 I-271-00 I-269-GF I-275-00 I-270-02

Hose 4”/114mm / L=1m/3.3ft Pressure hose 3”/76mm Hose clamp Elbow 450 2” BSP M/F Hose connector 3”/76mm - 2” BSP Ball valve 2” BSP Nozzles (steel) Controller

I-268-01 I-213-00 I-331-00 I-316-00 I-215-00 I-317-00 I-318-00 E-300-00

P-259-01 Pumpunit JTC-90-00

V-200-50 I-336-00 I-316-00

I-269-GF I-317-00 I-213-00

I-267-00

Option for vertical pump

Holland Marine Parts

D-008-03

All prices ex. VAT

SELECT COMPONENTS JET THRUSTERS COMBI: BOW AND STERN

Select a pump unit with 3-way valve

30KGF

50KGF

70KGF

90KGF

JT-30 12V

JT-50 24V

JT-70 24V

JT-90 24V

Pump unit

€ 1.812.-

€ 2.090.-

€ 3.048.-

€ 3.367.-

€ 986.-

€ 1.290.-

3-Way Valve (a set of 2 pieces) Basic installation Kit

€ 1.964- page 20-21

€ 2.585.- page 28-29

€ 2.585..- page 28-29

Basic installation Kit aluminium boats (nozzles incl.)

€ 2.798.- page 22-23

€ 3.621.- page 30-31

❏

❏ Select the desired pump head position (pump head must be under waterline) pos. 1

pos. 2

pos. 1

pos. 2

Note: All 24V Jet Thruster systems can be installed in a 12V circuit with the series parallel switch and dedicated batteries.

❏ JT-70 / JT-90 573 22,6

573 22,6

❏ JT-70 / JT-90

334,8 13,2

160 6,3

175 6,9

❏.....m � 36,50 p/m

188 7,4

Select a set of nozzles, see page 44 � 170.- (2 pcs) � 190.- (2 pcs) � 210.- (2 pcs) � 220.- (2 pcs) � 250.- (2 pcs) � 330.- (2 pcs)

148 5,8

� 250.- (2 pcs)

❏ 250

❏ 350

❏ 450

❏ 55

❏ 650

❏ JT-70 / JT-90

175 6,9

� 66.- (2 pcs)

❏ transom 900

� 190.- (2 pcs)

� 150.- (2 pcs)

❏ steel

❏ SS316

❏ aluminum

Option for water intake combination, available at extra cost: 2 x 450 elbow instead of standard provided 900 elbow* JT-30 / JT-50 (* € 60.- deduction to installation kit) Elbow 450 3” F/F I-354-00 ❏ � 133.I-364-00 Elbow 450 3” M/F

}

JT-70 / JT-90 (* € 95.- deduction to installation kit) Elbow 450 4” M/F (2X) I-272-00 ❏ � 230.-

6 JT 30 12V 1x ❏ JT 50 24V 2x ❏ JT 70 24V 4x ❏ JT 90 24V 4x ❏

Zinc anode JT70 / JT90

Wet wipes Tissues

Removes excessive poly-urethane sealant easily

❏ � 22.-

All prices ex. VAT

D-008-03

Pump outlet

� 306.� 612.� 1.224.� 1.224.-

Pump inlet

1. Pump :

€ . . . . . . . . . . . . . . . . . . . . . . . .

Valve:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Installation kit:

€ . . . . . . . . . . . . . . . . . . . . . . . .

2. Pump outlet:

€ . . . . . . . . . . . . . . . . . . . . . . . .

3. Hose:

€ . . . . . . . . . . . . . . . . . . . . . . . .

4. Nozzles:

€ . . . . . . . . . . . . . . . . . . . . . . . .

5. Alternative elbows: € . . . . . . . . . . . . . . . . . . . . . . . .

❏ JT-70 / JT-90

! ❏ Select if double set (4 nozzles) of one type is desired.

❏ 00

148 5,8

� 160.-

Hose JT-70 / JT-90 Ø 3” / 76 mm

344 13,5 188 7,4

❏.....m � 30,50 p/m

❏ JT-70 / JT-90

155,3 6,1

332,3 13,1

Hose JT-30 / JT-50 Ø 2” / 51 mm 155 6,1

❏ JT-30 / JT-50

� 102.- 11 0,4

❏ JT-30 / JT-50

110 4,3

❏ JT-30 / JT-50

� 131.-

300 11,8

❏ JT-30 / JT-50

� 60.-

344 13,5

� 145.-

75 3

� 88.-

11 0,4

� 110.-

110 4,3

� 18.-

Select hose length

115 4,5

110 4,3

❏ JT-70 / JT-90

300 11,8

❏ JT-30 / JT-50

Select a pump outlet Pump outlet on pump unit

110 4,3

❏ JT-30 / JT-50

❏ � 175.-

❏ � 195.-

Packaging costs 1 euro pallet; � 110.-* * See page 52

Incoterms: Ex. works Donker Duyvisweg 297 Dordrecht, The Netherlands

6. Batteries:

€ . . . . . . . . . . . . . . . . . . . . . . . .

7. Zinc anode:

€ . . . . . . . . . . . . . . . . . . . . . . . .

8. Wipes:

€ . . . . . . . . . . . . . . . . . . . . . . . .

9. Packaging:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Complete system €:

. . . . . . . . . . . . . . . . . . . . . . . .

Holland Marine Parts

JT-30 / JT-50 VERTICAL SINGLE BOW OR STERN

V-100-50

Pumpunit JT-30 / JT-50 3-Way valve

JTVS-30-00 / JTVS-50-00 V-100-50

Water inlet Pressure hose 2”/51mm Hose clamp Elbow 450 2” BSP M/F Hose connector 2”/51mm Ball valve 2” BSP Nozzles (steel) Pump outlet straight 2”/51mm Controller Controller

I-302-00 I-113-00 I-114-00 I-316-00 I-115-00 I-317-00 I-318-00 I-142-00 E-300-00 I-303-00

I-300-00 I-302-00

I-116-00

P-142-00

Option 1:

I-317-00

I-113-00

I-114-00

I-122-00

Option 2:

I-316-00

JT-30 / JT-50 VERTICAL COMBI BOW AND STERN

Pumpunit JT-30 / JT-50 3-Way valve

JTVC-30-00 / JTVC-50-00 V-100-50

Hose clamp Pressure hose 2”/51mm Elbow 450 2” BSP M/F Hose connector 2”/51mm

I-114-00 I-113-00 I-316-00 I-115-00

Ball valve 2” BSP Nozzles (steel) 2-way 900 hose connector Controller

I-317-00 I-318-00 P-155-00 E-300-00

V-100-50

I-115-00

I-317-00

I-113-00

P-155-00

Option 1:

I-114-00 I-316-00

Option 2a:

P-122-00

Option 2b:

Holland Marine Parts

P-154-00 I-122-00

D-008-03

All prices ex. VAT

SELECT COMPONENTS JET THRUSTER: VERTICAL, SINGLE & COMBI

Select a pump unit with 3-way valve

30KGF Single 50KGF Single 30KGF Combi 50KGF Combi

JT-30 12V

JT-50 24V

JT-30 12V

JT-50 24V

Pump unit + water intake (see below)

€ 1.910.-

€ 2.290.-

€ 1.910.-

€ 2.290.-

3-Way Valve

€ 493.-

Basic installation Kit

€ 1.267.- page 16

€ 1.572.- page 30

Basic installation Kit aluminium boats

€ 1.603.- page 31

€ 2.256.- page 32

❏

Technical details see page 34

Select a pump outlet. Pump outlet on pump unit.

I-115-00

Included with pump unit 1 x E-302-00 Cable controller to pump 1 x I-165-00 Hexagon nipple 2” BSP m/m SS316 1 x I-282-00 Ring for water inlet 1 x I-302-00 Water inlet 3” BSP L=90mm SS316 1 x I-303-00 Ring nylon for water inlet 1 x I-304-00 Nut 3” BSP for water inlet 1 x I-305-00 Tool for water inlet 1 x I-317-00 Ball valve 2” BSP Ms/Chrome

P-513-52

P-507-52

P-154-00

Hose JT-30 / JT-50

Ø 2” / 51 mm

❏ . . . . . m

� 30,50 p/m

Select a set of nozzles, see page 44 � 170.- (2 pcs) � 190.- (2 pcs) � 210.- (2 pcs) � 220.- (2 pcs) � 250.- (2 pcs) � 330.- (2 pcs) ! ❏ Select if double set (4 nozzles) of one type is desired.

❏ 00

❏ 250

❏ 350

❏ 450

5 JT 30 12V 1x ❏ JT 50 24V 2x ❏ JT 70 24V 4x ❏ JT 90 24V 4x ❏

❏ 55

❏ 650

� 250.- (2 pcs)

❏ transom 900

Zinc anode CP-001-00

Pump outlet

� 306.� 612.� 1.224.� 1.224.

� 66.- (2 pcs)

❏ � 175.-

❏ steel

� 190.- (2 pcs)

❏ SS316

� 150.- (2 pcs)

❏ aluminum

1. Pump:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Valve:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Installation kit:

€ . . . . . . . . . . . . . . . . . . . . . . . .

2. Pump outlet:

€ . . . . . . . . . . . . . . . . . . . . . . . .

3. Hose:

€ . . . . . . . . . . . . . . . . . . . . . . . .

4. Nozzles:

€ . . . . . . . . . . . . . . . . . . . . . . . .

5. Alternative elbows: € . . . . . . . . . . . . . . . . . . . . . . . .

Wet wipes Tissues

Removes excessive poly-urethane sealant easily

❏ � 22.-

All prices ex. VAT

D-008-03

Packaging costs 1 euro pallet; � 110.-* * See page 52

Incoterms: Ex. works Donker Duyvisweg 297 Dordrecht, The Netherlands

6. IP cover:

€ . . . . . . . . . . . . . . . . . . . . . . . .

7. Batteries:

€ . . . . . . . . . . . . . . . . . . . . . . . .

8. Zinc anode:

€ . . . . . . . . . . . . . . . . . . . . . . . .

9. Wipes:

€ . . . . . . . . . . . . . . . . . . . . . . . .

10. Packaging:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Complete system €:

. . . . . . . . . . . . . . . . . . . . . . . .

Holland Marine Parts

JT-70 / JT-90 VERTICAL SINGLE BOW OR STERN

Pumpunit JTVS-90-00

Pump Unit JT70/JT90 3-Way Valve

JTVS-70-00 / JTVS-90-00 V-200-00

1x 2.5” Pump outlet 1x Ball Valve 2,5” BSP Hose Clamp Hose connector 76mm/2”BSP Elbow 45 Degree M/F Ball Valve 2” BSP

P-256-00 I-309-00 6x I-331-00 2x I-215-00 2x I-316-00 2x I-317-00

I-317-00 I-213-00

V-200-50

I-213-00 I-317-00

I-331-00

I-316-00 I-336-00

JT-70 / JT-90 VERTICAL COMBI BOW AND STERN

Pump Unit JT70/JT90 3-Way Valve

JTVS-70-00 / JTVS-90-00 V-201-00

2.5” Pump outlet Ball Valve 2,5” BSP Hose Connector 76mm Hose Clamp Hose connector 76mm/2”BSP Elbow 45 Degree M/F Ball Valve 2” BSP

2x P-256-00 1x I-309-00 1x I-310-00 12x I-331-00 4x I-215-00 4x I-316-00 4x I-317-00

P-259-00

V-200-50

Option 2a:

I-215-00 I-316-00 I-317-00

P-242-00

or Option 2b:

I-213-00

P-259-00

Option 1:

Holland Marine Parts

P-258-00

I-331-00

I-318-00

P-222-00 D-008-03

All prices ex. VAT

SELECT COMPONENTS JET THRUSTER: VERTICAL, SINGLE & COMBI

Select a pump unit with 3-way valve

70KGF Single 90KGF Single 70KGF Combi 90KGF Combi

JT-70 24V

JT-90 24V

JT-70 24V

JT-90 24V

Pump unit + water intake (see below)

€ 3.500.-

€ 4.100.-

€ 3.500.-

€ 4.100.-

3-Way Valve Basic installation Kit

€ 645.-

€ 1.290.-

€ 1.447.- page 39

€ 1.892.- page 40

❏

Included with pump unit - 1x I-616-00 Water intake flange - 1x I-618-00 SS316 guide ring - 1x Set of bolts - 1x I-309-00 2⅟₂” ball valve - 1x P-256-00 Hose connector - 1x I-310-00 76mm hose connector Jet Thruster Combi

Select a pump outlet. Pump outlet on pump unit.

Jet Thruster COMBI

Jet Thruster SINGLE JT-70 / JT-90

❏ � 18.-

Option 1:

❏ �145.-

Option 2a:

❏ �147.-

or JT-70 / JT-90

❏ � 131.-

Option 2b:

❏ 00

❏ 250

❏ 350

❏ 450

5 JT 30 12V 1x ❏ JT 50 24V 2x ❏ JT 70 24V 4x ❏ JT 90 24V 4x ❏

❏ 55

Removes excessive poly-urethane sealant easily

❏ � 22.-

� 250.- (2 pcs)

� 66.- (2 pcs)

❏ transom 900

Pump outlet

� 306.� 612.� 1.224.� 1.224.-

Wet wipes Tissues

❏ 650

❏ �198.-

❏ steel

D-008-03

Ø 3” / 76 mm

❏ . . . . . m

� 36,50 p/m

� 190.- (2 pcs)

❏ SS316

� 150.- (2 pcs)

❏ aluminum

❏ � 175.-

Packaging costs 1 euro pallet; � 110.-* * See page 52

Incoterms: Ex. works Donker Duyvisweg 297 Dordrecht, The Netherlands

1. Pump :

€ . . . . . . . . . . . . . . . . . . . . . . . .

Valve:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Installation kit:

€ . . . . . . . . . . . . . . . . . . . . . . . .

2. Pump outlet:

€ . . . . . . . . . . . . . . . . . . . . . . . .

3. Hose:

€ . . . . . . . . . . . . . . . . . . . . . . . .

4. Nozzles:

€ . . . . . . . . . . . . . . . . . . . . . . . .

5. Batteries:

€ . . . . . . . . . . . . . . . . . . . . . . . .

6. Zinc anode:

€ . . . . . . . . . . . . . . . . . . . . . . . .

7. Wipes:

€ . . . . . . . . . . . . . . . . . . . . . . . .

8. Packaging:

€ . . . . . . . . . . . . . . . . . . . . . . . .

Complete system €:

All prices ex. VAT

Zinc anode CP-001-00

Hose JT-70 / JT-90

. . . . . . . . . . . . . . . . . . . . . . . .

Holland Marine Parts

(prices mentioned per piece)

Product group: Pump units JT-30 € 1712.- JTS-30-00 30Kgf € 1812.- JTC-30-00

- JT-30 Single 12V - JT-30 Combi 12V - Incl. controller cable 5m / 16ft E-302-00

€ 1910.- JTVS-30-00 € 1910.- JTVC-30-00

- JT-30 Vertical Single + water intake 12V - JT-30 Vertical Combi + water intake 12V - Pump head: Casted PP, fiberglas reinforced - Incl. controller cable 5m / 16ft E-302-00

50Kgf JT-50 € 2090.- JTS-50-00 € 2050.- JTC-50-00

- JT-50 Single 24V - JT-50 Combi 24V - Incl. controller cable 5m / 16ft E-302-00

€ 2290.- JTVS-50-00 € 2290.- JTVC-50-00

- JT-50 Vertical Single + water intake 24V - JT-50 Vertical Combi + water intake 24V - Pump head: Casted PP, fiberglas reinforced - Incl. controller cable 15m / 16ft E-302-00

70Kgf JT-70 € 3048.- JTS-70-00 - JT-70 Single 24V € 3048.- JTC-70-00 - JT-70 Combi 24V incl.: I-604-00 (rubber seal) P-319-00 (SS316 pump inlet, hose connector 4”)

- Pump head: Casted PUR, fiberglass reinforced - Bracket SS316 - Weight; 49Kg - Incl. controller cable 5m / 16ft E-302-00

90Kgf JT-90 € 3367.- JTS-90-00 - JT-90 Single 24V € 3367.- JTC-90-00 - JT-90 Combi 24V incl.: I-604-00 (rubber seal) P-319-00 (SS316 pump inlet, hose connector 4”)

- Pump head: Casted PUR, fiberglass reinforced - Bracket SS316 - Weight; 61Kg - Incl. controller cable 5m / 16ft E-302-00

€ 1910.- JTVS-30-00 € 2290.- JTVS-50-00

- Pump head: Casted PUR, fiberglass reinforced - Bracket SS316 - Weight; 35Kg - Incl. controller cable 5m / 16ft E-302-00 - Pump head: Casted PUR, fiberglass reinforced - Bracket SS316 - Weight; 35Kg - Incl. controller cable 5m / 16ft E-302-00

€ 3500.- JTVS-70-00 € 4100.- JTVS-90-00

- Pump head: Casted PUR, fiberglass reinforced - Bracket SS316 - Weight; 61Kg - Incl. controller cable 5m / 16ft E-302-00 - Pump head: Casted PUR, fiberglass reinforced - Bracket SS316 - Weight; 61Kg - Incl. controller cable 5m / 16ft E-302-00

Product group: 3-Way valves

3-Way valve JT-30 / JT-50 € 493.- V-100-50

- Valve housing casted SS316 - Hose connection 2” / 51 mm - Incl. controller cable 10m / 33ft E-303-00 - Weight; 5.5Kg

3-Way valve JT-70 / JT-90 € 645.- V-200-50

- Valve housing casted SS316 - Hose connection 3” / 76 mm - Incl. controller cable 10m / 33ft E-303-00 - Weight; 8Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

Water inlet side combinations

JTS-30-Compact / JTS-50-Compact

I-113-00

V-100-50

I-331-00 (2x)

I-114-00 (6x) I-307-00

I-318-00 (2x)

I-113-00

I-312-00

I-310-00

I-113-00

I-309-00

I-115-00 (2x)

I-308-00

I-316-00 (2x) I-317-00 (2x)

I-304-00 I-303-00 I-306-00 I-302-00

Pressure side: all parts and options

JTS-30-Compact / JTS-50-Compact

I-113-00

V-100-50

I-331-00 (2x)

I-114-00 (6x) I-307-00

I-318-00 (2x)

I-113-00

I-312-00

I-310-00 I-309-00 I-308-00 I-304-00

I-113-00 I-115-00 (2x) I-316-00 (2x) I-317-00 (2x)

I-303-00 I-306-00 I-302-00

All prices ex. VAT

D-008-03

Holland Marine Parts

(prices mentioned per piece)

Jet Thruster controller

€ 660.- E-300-00

Controller unit for Jet Thruster compact (12V or 24V) Weight: 1,2Kg

€ 100.- E-307-00

Joystick extension cable - 10m / 33ft

(also suitable as optional second joystick connection cable)

Use this cable if you need to extend the E-301-00 Controller to Joystick cable.

€ 55.- E-308-00

Pump unit extension cable - 5m / 16ft

Use this cable if you need to extend the Controller to Pump power cable.

€ 70.- E-309-00

3-way directional valve extension cable - 5m / 16ft

Use this cable if you need to extend the Controller to the Valve controller cable.

Holland Marine Parts

D-008-03

All prices ex. VAT

CONTROLLER UNIT The Jet Thruster Controller unit connects all key-elements of the system and is included with the Installation kit. Operated thru the Joystick, the Jet Thruster Pump Unit will generate the required water flow to maneuver your boat. The direction of the flow to port or starboard is determined by the 3-Way Valve. In case of a Jet Thruster Combi two 3-Way Valves operate together. Our Plug & Play setup offers an easy and fast installation of the Jet Thruster controls. In case the standard provided cables are not long enough, you can easily extend them with the available extension cables

12V

Optional for second valve in case of Jet Thruster Combi

All prices ex. VAT

D-008-03

Holland Marine Parts

Standard installation kit JT30 / JT50 Single ART. NR: I-100-50

pump inlet side

Use this number to order the complete kit. Each individual Installation Kit JT-30/50 Single includes: 1x I-302-00 Water inlet 3” BSP SS316 1x I-307-00 Elbow 90 degrees 3” BSP F/F SS316 1x I-308-00 Reducer 3”/2,5” BSP SS316 1x I-309-00 Ball valve 2,5” BSP 1x I-310-00 Hose connector 2,5” BSP 1x I-312-00 Hose 3”/76mm L=1m 2x I-331-00 Hose clamp

I-307-00

I-304-00 I-303-00 I-306-00

I-308-00

I-309-00

I-310-00 I-331-00

I-312-00

I-331-00

I-302-00

(continue on next page)

water inlet side

prices/weights mentioned per piece Inlet side

Description

Qty.

Water inlet 3” BSP (compl.) € 110.- I-302-00

- water inlet assembly JT30 / JT50. - Incl: Ring nylon, nut 3” Intake is protected with filter. - Weight; 1.4Kg - Incl. tool

Elbow 90˚ € 60.- I-307-00

- 3” BSP, f/f, SS316 - Weight; 1.5Kg

Reducer € 41.- I-308-00

- 3” X 2,5” BSP, m/m, SS316 - Weight; 0.6Kg

Ball valve 2,5” BSP € 88.- I-309-00

- Brass/chrome - Weight; 2.5Kg

Hose connector € 37.- I-310-00

- Threaded side 2,5” BSP, hose connection 3” / 76 mm - Weight; 0.5Kg

Water intake hose € 38.- I-312-00

- Ø 76mm 3”, Standard length 1 meter, 3,28 ft, reinforced with metal spiral - Weight; 2Kg

Hose clamp water intake hose € 9.- I-331-00

- Steel double bolted - Weight; 0.6Kg

Holland Marine Parts

Price

Art. nr.

D-008-03

All prices ex. VAT

JT30 / JT50 Single

Summary Jet Thruster components at page 7 6x I-114-00 Hose clamp 2x I-115-00 Hose connector SS316 2x I-316-00 Elbow 45 degrees M/F SS316 2x I-317-00 Ball valve 2” BSP 1x I-254-00 Fuse holder+fuse 1x I-150-50 Control panel with Joystick 1x E-103-00 Cable Joystick to pump (AB+/AB+) L=10m/33ft 1x E-104-00 Cable Pump to Valve (CDE/CDE) L=10m/33ft 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

NOZZLE

I-114-00 3-WAY VALVE

I-317-00

I-316-00

I-115-00

Complete installation kit € 1.659.Total weight installation kit: 20.4Kg

prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

- Steel double bolted - for 2” hose - Weight; 0.25Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Ball valve 2” BSP € 35.- I-317-00

- Brass-chrome - Weight; 1.5Kg

Fuse Holder Single € 40.- I-254-01

- incl. 1x ANL fuse - Weight; 0.2Kg

Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller

(Push button controls available)

Controller

Incl.: - Controller - Controller to joystick cable - Controller power cable

Hose clamp JT-30 / JT-50 € 5.- I-114-00

€ 782.- € 660.- € 95.- € 27.-

E-310-00 E-300-00 E-301-00 E-304-00

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg

Holland Marine Parts

Standard installation kit JT30 / JT50 Single Aluminium boats Art. nr.: I-100-01 Use this number to order the complete kit. Each individual Installation Kit JT-30/50 Single includes:

I-307-00

1x I-302-01 Water inlet 3” BSP Aluminium 1x I-157-00 Socket POM Female 1x I-372-00 Hexagon Nipple m/m SS316 1x I-307-00 Elbow 90 degrees 3” BSP F/F SS316 1x I-308-00 Reducer 3”/2,5” BSP SS316 1x I-309-00 Ball valve 2,5” BSP 1x I-310-00 Hose connector 2,5” BSP 1x I-312-00 Hose 3”/76mm L=1m 2x I-331-00 Hose clamp

I-304-00 I-303-00 I-372-00 I-306-00

I-309-00

I-310-00 I-331-00

I-312-00

I-331-00

I-304-00 I-303-00 I-306-00 I-302-01 I-302-AL

water inlet side

I-307-00

prices/weights mentioned per piece Price

Art. nr.

Water inlet 3” BSP (compl.) € 160.- I-302-AL Aluminium I-304-00

I-303-00 I-372-00 I-306-00

I-308-00

I-302-00 I-157-00

(continue on next page) Inlet side

pump inlet side

ART. NR: I-100-01

I-308-00

Description

Qty.

- Water inlet assembly JT30 / JT50. - Incl: Ring nylon, nut 3” Intake is protected with filter. - Weight; 0.55Kg

I-309-00

Socket POM € 75.- I-157-00 I-302-00

I-310-00 I-331-00

I-312-00

I-331-00

- 3” BSP f/f - Weight; 0.4Kg

- 3” BSP m/m SS316 - Weight; 0.8Kg

Elbow 90˚ € 60.- I-307-00

- 3” BSP, f/f, SS316 - Weight; 1.5Kg

Reducer € 41.- I-308-00

- 3” X 2,5” BSP, m/m, SS316 - Weight; 0.6Kg

Ball valve 2,5” BSP € 88.- I-309-00

- Brass/chrome - Weight; 2.5Kg

Hose connector € 37.- I-310-00

- Threaded side 2,5” BSP, hose connection 3” / 76 mm - Weight; 0.5Kg

Water intake hose € 38.- I-312-00

- Ø 76mm 3”, Standard length 1 meter, 3,28 ft, reinforced with metal spiral - Weight; 2Kg

Hose clamp water intake hose € 9.- I-331-00

- Steel double bolted - Weight; 0.6Kg

I-157-00

I-304-00 I-303-00 Hexagon nipple € 37.- I-372-00 I-306-00 I-302-01

Holland Marine Parts

D-008-03

All prices ex. VAT

JT30 / JT50 Single Alu

Summary Jet Thruster components at page 7 6x I-114-00 Hose clamp 2x I-115-00 Hose connector SS316 2x I-316-00 Elbow 45 degrees M/F SS316 2x I-368-00 Ball valve 2” Composite f/f 2x I-322-00 Nozzle Aluminium incl. Venturi 1x I-254-00 Fuse holder+fuse 1x I-150-50 Control panel with Joystick I-322-00 1x E-103-00 Cable Joystick to pump (AB+/AB+) L=10m/33ft 1x E-104-00 Cable Pump to Valve (CDE/CDE) L=10m/33ft 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

I-114-00 3-WAY VALVE

I-368-00

I-316-00

I-115-00

Complete installation kit € 2.157.Total weight installation kit: 20Kg

prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-30 / JT-50 € 5.- I-114-00

- Steel double bolted - for 2” hose - Weight; 0.25Kg

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve composite € 128.- I-368-00

- Ball valve 2” composite f/f - Weight; 0.75Kg

Nozzle Aluminum € 75.- I-322-00

- Ø 60mm Compl. incl. venturi - Custom lenght available upon request - total length 170 mm - Weight; 0.25Kg

Fuse Holder Single € 40.- I-254-01

- incl. 1x ANL fuse - Weight; 0.2Kg

Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg Holland Marine Parts

Standard installation kit JT30 / JT50 Combi ART. NR: I-101-50

Each individual Installation Kit JT-30/50 Combi includes: 1x I-302-00 Water inlet 3” BSP SS316 1x I-307-00 Elbow 90 degrees 3” BSP F/F SS316 1x I-309-00 Ball Valve 2,5” BSP 1x I-308-00 Reducer 3” BSP/2,5” BSP SS316 1x I-310-00 Hose connector 2,5” BSP 1x I-312-00 Hose 3”/76mm L=1m / 3,3Ft 2x I-331-00 Hose clamp

pump inlet side

Use this number to order the complete kit. I-307-00

I-304-00 I-303-00 I-306-00

I-308-00

I-309-00

I-310-00 I-331-00

I-312-00

I-331-00

I-302-00

(continue on next page)

water inlet side

prices/weights mentioned per piece Inlet side

Price

Art. nr.

Description

Qty.

Water inlet 3” BSP (compl.) € 110.- I-302-00

- water inlet assembly JT30 / JT50. - Incl: Ring nylon, nut 3” Intake is protected with filter. - Weight; 1.4Kg - Incl. tool

Elbow 90˚ € 60.- I-307-00

- 3” BSP, f/f, SS316 - Weight; 1.5Kg

Reducer € 41.- I-308-00

- 3” X 2,5” BSP, m/m, SS316 - Weight; 0.6Kg

Ball valve 2,5” BSP € 88.- I-309-00

- Brass/chrome - Weight; 2.5Kg

Hose connector € 37.- I-310-00

- Threaded side 2,5” BSP, hose connection 3” / 76 mm - Weight; 0.5Kg

Water intake hose € 38.- I-312-00

- Ø 76mm 3”, Standard length 1 meter, 3,28 ft, reinforced with metal spiral - Weight; 2Kg

Hose clamp water intake hose € 9.- I-331-00

- Steel double bolted, M10 - Weight; 0.6Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

JT30 / JT50 Combi

Summary Jet Thruster components at page 7 12x I-114-00 Hose clamp 48-60mm 4x I-115-00 Hose connector 2” BSP SS316 4x I-316-00 Elbow 45 degrees 2” BSP M/F SS316 4x I-317-00 Ball valve 2” BSP 1x I-254-00 Fuse holder+fuse 1x I-151-50 Control panel with Joysticks 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

NOZZLE

I-114-00 3-WAY VALVE

I-317-00

I-316-00

I-115-00

Complete installation kit € 1.964.Total weight installation kit: 25Kg

prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-30 / JT-50 48-60 mm. € 5.- I-114-00

- Steel double bolted - for 2” hose - Weight; 0.25Kg

12x

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

- Brass-chrome - Weight; 1.5Kg

Fuse Holder Single € 40.- I-254-01

- incl. 1x ANL fuse - Weight; 0.3Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.45Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg

Holland Marine Parts

Standard installation kit JT30 / JT50 Combi Aluminium boats Art. nr.: I-101-01 pump inlet side

ART. NR: I-101-01

Use this number to order the complete kit. Each individual Installation Kit JT-30/50 Combi includes: 1x I-302-AL Water inlet 3” BSP Aluminium 1x I-157-00 Socket POM Female 1x I-372-00 Hexagon Nipple m/m SS316 1x I-307-00 Elbow 90 degrees 3” BSP F/F SS316 1x I-309-00 Ball Valve 2,5” BSP 1x I-308-00 Reducer 3” BSP/2,5” BSP SS316 1x I-310-00 Hose connector 2,5” BSP 1x I-312-00 Hose 3”/76mm L=1m / 3,3Ft 2x I-331-00 Hose clamp (continue on next page)

I-307-00

I-304-00 I-303-00 I-372-00 I-306-00

I-310-00 I-331-00

I-312-00

I-331-00

I-304-00 I-303-00 I-306-00 I-302-01 I-302-AL

water inlet side

prices/weights mentioned per piece Price

Art. nr.

Description

Water inlet 3” BSP (compl.) € 160.- I-302-AL Aluminium I-304-00

I-303-00 I-372-00 I-306-00

I-309-00

I-302-00 I-157-00

I-307-00 Inlet side

I-308-00

- Water inlet assembly JT30 / JT50. - Incl: Ring nylon, nut 3” Intake is protected with filter. - Weight; 0.55Kg

I-309-00

Socket POM, female € 75.- I-157-00 I-302-00

Qty.

I-310-00 I-331-00

I-312-00

I-331-00

- 3” BSP f/f - Weight; 0.4Kg

- 3” BSP m/m SS316 - Weight; 0.8Kg

Elbow 90˚ € 60.- I-307-00

- 3 ” BSP, f/f, SS316 - Weight; 1.5Kg

Reducer € 41.- I-308-00

- 3” X 2,5” BSP, m/m, SS316 - Weight; 0.6Kg

Ball valve 2,5” BSP € 88.- I-309-00

- Brass/chrome - Weight; 2.5Kg

Hose connector € 37.- I-310-00

- Threaded side 2,5” BSP, hose connection 3” / 76 mm - Weight; 0.5Kg

Water intake hose € 38.- I-312-00

- Ø 76mm 3”, Standard length 1 meter, 3,28 ft, reinforced with metal spiral - Weight; 2Kg

Hose clamp water intake hose € 9.- I-331-00

- Steel double bolted - Weight; 0.6Kg

I-157-00

I-304-00 I-303-00 Hexagon nipple, m/m SS316 € 37.- I-372-00 I-306-00 I-302-01

Holland Marine Parts

D-008-03

All prices ex. VAT

JT30 / JT50 Combi Alu

Summary Jet Thruster components at page 7 12x I-114-00 Hose clamp 4x I-115-00 Hose connector 2” BSP SS316 4x I-316-00 Elbow 45 degrees 2” BSP M/F SS316 4x I-368-00 Ball valve 2” BSP Composite F/F 4x I-322-00 Nozzle, aluminium incl. ventury 1x I-254-00 Fuse holder+fuse 1x I-151-00 Control panel with Joysticks 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

I-114-00 3-WAY VALVE I-322-00 I-368-00

I-316-00

I-115-00

Complete installation kit € 2.798.Total weight installation kit: 24Kg

prices mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-30 / JT-50 € 5.- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

12x

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve composite € 128.- I-368-00

- Ball valve composite 2” f/f - Weight; 0.75Kg

Nozzle Aluminum € 75.- I-322-00

- Ø 60mm Compl. incl. venturi - Custom lenght available upon request - total length 170 mm - Weight; 0.25Kg

Fuse Holder Single € 40.- I-254-01

- incl. 1x ANL fuse - Weight; 0.3Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.45Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg Holland Marine Parts

Standard installation kit JT70 / JT90 Single Art. nr.: I-200-00

ART. NR: I-200-50

pump inlet side

Use this number to order the complete kit. Each individual Installation Kit JT-90 Single includes: 1x I-267-00 Water inlet 4” BSP SS316 1x I-271-00 Elbow 90 degrees 4” BSP F/M SS316 1x I-269-GF Ball valve 4” BSP 1x I-275-01 Hose connector 4” BSP 1x I-268-01 Hose 110mm L=1m/3.3ft 4x I-270-02 Hose clamp (continue on next page)

I-271-00 I-271-00 I-271-00

I-261-00 I-261-00 I-261-00 I-272-00 I-272-00 I-272-00 I-274-00 I-274-00 I-274-00

I-269-GF I-269-GF I-269-GF I-275-01 I-275-01 I-275-01 I-270-02 I-270-02 I-270-02 I-268-01 I-268-01 I-268-01I-270-02 I-270-02 I-270-02 I-269-GF I-275-01 I-270-02

I-267-00 I-267-00 I-267-00

prices/weights mentioned per piece Inlet side

Price

Art. nr.

Description

Qty.

Water inlet 4” (compl.) € 138.- I-267-00 Standard length

- Water inlet assembly JT70 / JT90. - Incl: Ring nylon, seal, nut 4” Intake is protected with filter. - L=120 - Weight; 2Kg - Incl. tool

Elbow 90˚ € 95.- I-271-00

- 4” BSP, m/f, SS316 - Weight; 2.75Kg

Ball valve 4” BSP € 235.- I-269-GF

Ball valve 4” - composite / GRP - Weight: 2.5 Kg

Hose connector € 50.- I-275-01

- Threaded side 4” BSP, hose connection 4” / 110 mm - Weight; 0.9Kg

Water intake hose € 115.- I-268-01

- Ø 110 mm (4”), Standard length 1 meter, 3.3 ft, reinforced with metal spiral - Weight; 3Kg

Hose clamp € 15.- I-270-02

- Stainless Steel - Galvanised bolt M8 - Weight; 0.16Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

JT70 / JT90 Single

Summary Jet Thruster components at page 5 6x I-331-00 Hose clamp 2x I-215-00 Hose connector 2,5” BSP SS316 2x I-316-00 Elbow 45 degrees 2” BSP M/F SS316 2x I-317-00 Ball valve 2” BSP full flow 1x I-255-00 Fuse holder+fuse 1x I-150-50 Control panel with joystick 1x E-103-00 Cable Joystick to pump (AB+/AB+) L=10m/33ft 1x E-104-00 Cable Pump to Valve (CDE/CDE) L=10m/33ft 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

NOZZLE

I-331-00 3-WAY VALVE

I-317-00

I-316-00

I-215-00

Complete installation kit € 2.140.Total weight installation kit: 29Kg

prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-70 / JT-90 € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Double bolted - Steel galvanised

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Thread 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

- Brass-chrome - Weight; 1.5Kg

Fuse Holder Double € 80.- I-255-01

- incl. 2x ANL fuse - Weight; 0.5Kg

Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller

(Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg

Holland Marine Parts

Standard installation kit JT70 / JT90 Single Aluminium boats Art. nr.: I-200-01 pump inlet side

ART. NR: I-200-01

Use this number to order the complete kit. Each individual Installation Kit includes:

I-271-00 I-271-00 I-271-00 I-271-00

1x I-278-AL Water inlet 4”, Aluminium 1x I-279-00 Socket 4” POM, I-279-00 1x I-313-00 Hexagon Nipple m/m, SS316 1x I-271-00 Elbow 4” M/M. SS316 1x I-269-GF Ball Valve F/F, 4” BSP 1x I-275-01 Hose connector, 4” BSP 4x I-270-02 Hose Clamp 1x I-268-01 Water inlet hose, Dia. 110mm, L=1m

I-304-00 I-304-00 I-304-00 I-304-00 I-303-00 I-303-00 I-303-00 I-303-00 I-313-00 I-313-00 I-313-00 I-313-00 I-306-00 I-306-00 I-306-00 I-306-00

I-270-02 I-270-02 I-270-02 I-270-02 I-270-02 I-270-02 I-270-02 I-270-02 I-308-00 I-308-00 I-308-00 I-308-00 I-308-00 I-308-00 I-308-00 I-269-GF I-269-GF I-308-00 I-269-GF I-269-00 I-269-GF I-269-00 I-269-00 I-275-01 I-275-01 I-269-00 I-275-01 I-275-00 I-270-00 I-275-01 I-275-00 I-270-00 I-275-00 I-270-00 I-270-00 I-275-00 I-270-00 I-270-00 I-270-00 I-268-01 I-268-01 I-270-00 I-268-01 I-268-00 I-268-01 I-268-00 I-268-00 I-270-00 I-270-00 I-268-00 I-270-00 I-270-00 I-270-00 I-270-00 I-270-00 I-270-00

I-307-00 I-307-00 I-307-00 I-307-00 I-302-00 I-302-00 I-302-00 I-302-00 I-279-00 I-279-00 I-279-00 I-279-00 I-304-00 I-304-00 I-304-00 I-304-00 I-303-00 I-303-00 I-303-00 I-303-00 I-306-00 I-306-00 I-306-00 I-306-00

I-308-00 I-308-00 I-308-00 I-308-00 I-309-00 I-309-00 I-309-00 I-309-00 I-310-00 I-310-00 I-310-00 I-331-00 I-310-00 I-331-00 I-331-00 I-331-00 I-307-00 I-307-00 I-307-00 I-307-00 I-331-00 I-331-00 I-331-00 I-331-00

I-278-AL I-278-AL I-278-AL I-278-AL I-267-AL

(continue on next page)

water inlet side

I-271-00 Inlet side

prices/weights mentioned per piece Price

Art. nr.

Water inlet 4” (compl.) € 370.- I-278-AL Standard length

I-304-00 I-303-00 I-313-00 I-306-00

Socket 4” POM

Description

Qty.

- Water inlet assembly JT70 / JT90. - Incl: Ring nylon, nut 4” Intake is protected with filter. - L=120 - Weight; 1Kg

I-308-00 I-308-00 I-269-GF I-269-00 I-275-01 I-275-00 I-270-00 I-270-02 I-270-00 I-268-01 I-268-00 I-270-00 I-270-02 I-270-00 € 90.-

I-279-00

I-307-00 I-302-00 I-279-00

- 4” BSP f/f - for connection and isolation of SS316 and aluminium parts - Weight; 0.7Kg

I-304-00 Hexagon nipple €42.- I-313-00 - 4” BSP m/m, SS316 - Weight; 1.5Kg I-303-00 I-308-00 I-309-00 I-310-00 I-331-00 I-306-00

I-307-00

I-331-00

I-278-AL Elbow 90˚ € 95.- I-271-00

- 4” BSP, m/f, SS316 - Weight; 275Kg

Ball valve 4” BSP € 235.- I-269-GF

Ball valve 4” - composite / GRP - Weight: 2.5 Kg

Hose connector € 50.- I-275-01

- Threaded side 4” BSP, hose connection 4” / 110 mm - Weight; 0.9Kg

Water intake hose € 115.- I-268-01

- Ø 110 mm (4”), Standard length 1 meter, 3.3 ft, reinforced with metal spiral - Weight; 3Kg

Hose clamp € 15.- I-270-02

- Stainless Steel - galvanised bolt M8 - Weight; 0.16Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

JT70 / JT90 Single Alu

Summary Jet Thruster components at page 5 6x I-331-00 Hose Clamp 2x I-215-00 Hose Connector, 76mm => 2” BSP 2x I-316-00 Elbow 2” BSP, 45 Degree, M/F 2x I-368-00 Ball Valve Composite, F/F 2” BSP 1x I-255-00 Fuse holder+ fuses 1x I-150-00 Joystick panel 2x I-322-00 Nozzle Aluminium 1x E-103-00 Cable Joystick to pump (AB+/AB+) L=10m/33ft 1x E-104-00 Cable Pump to Valve (CDE/CDE) L=10m/33ft 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

I-331-00 3-WAY VALVE I-332-00 I-368-00

I-316-00

I-215-00

Complete installation kit € 2.840.Total weight installation kit: 29Kg

prices/weights mentioned per piece Pressure side

Description

Qty.

Hose clamp JT-70 / JT-90 € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Steel galvanised - Double bolted

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Thread 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve composite € 128.- I-368-00

- Ball valve 2” BSP composite - Weight; 0.75Kg

Nozzle Aluminum € 75.- I-322-00

- Ø 60mm - Custom lenght available upon request - total length 170 mm - Weight; 0.25Kg

Fuse Holder Double € 80.- I-255-01

- incl. 2x ANL fuse - Weight; 0.5Kg

Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

Price

D-008-03

Art. nr.

1x 1x 1x

- Weight; 1,2Kg Holland Marine Parts

Standard installation kit JT70 / JT90 Combi ART. NR: I-201-50

pump inlet side

Use this number to order the complete kit. Each individual Installation Kit JT-90 Combi includes: 1x I-267-00 Water inlet 4” BSP SS316 1x I-271-00 Elbow 90 degrees 4” BSP M/F SS316 1x I-269-GF Ball valve 4” BSP 1x I-275-01 Hose connector 4” BSP 1x I-268-01 Hose 4” L=1m/3.3ft 4x I-270-02 Hose clamp (continue on next page)

I-271-00 I-271-00 I-271-00

I-261-00 I-261-00 I-261-00 I-272-00 I-272-00 I-272-00 I-274-00 I-274-00 I-274-00

I-269-GF I-269-GF I-269-GF I-275-01 I-275-01 I-275-01 I-270-02 I-270-02 I-270-02 I-268-01 I-268-01 I-268-01I-270-02 I-270-02 I-270-02 I-269-GF I-275-01 I-270-02

I-267-00 I-267-00 I-267-00

prices/weights mentioned per piece Inlet side

Price

Art. nr.

Description

Qty.

Water inlet 4” (compl.) € 138.- I-267-00 Standard length

- Water inlet assembly JT70 / JT90. - Incl: Ring nylon, seal, nut 4” Intake is protected with filter. - L=120 - Weight; 2Kg - Incl. tool

Elbow 90˚ € 95.- I-271-00

- 4” BSP, m/f, SS316 - Weight; 2.75Kg

Ball valve 4” BSP € 235.- I-269-GF

Ball valve 4” - composite / GRP - Weight: 2.5 Kg

Hose connector € 50.- I-275-01

- Threaded side 4” BSP, hose connection 4” / 110 mm - Weight; 0.9Kg

Water intake hose € 115.- I-268-01

- Ø 110 mm (4”), Standard length 1 meter, 3.3 ft, reinforced with metal spiral - Weight; 3Kg

Hose clamp € 15.- I-270-02

- Stainless Steel - galvanised bolt M8 - Weight; 0.16Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

JT70 / JT90 Combi

Summary Jet Thruster components at page 9 12x I-331-00 Hose clamp 4x I-215-00 Hose connector 2,5” BSP SS316 4x I-316-00 Elbow 45 degrees 2” BSP M/F SS316 4x I-317-00 Ball valve 2” BSP 1x I-255-00 Fuse holder+fuse 1x I-151-50 Control panel with joysticks 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

NOZZLE

I-331-00 3-WAY VALVE

I-317-00

I-316-00

I-215-00

Complete installation kit € 2.585.Total weight installation kit: 37Kg

prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-70 / JT-90 € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Double bolted - Steel galvanised

12x

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Thread 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

- Brass-chrome, full bore - Weight; 1.5Kg

Fuse Holder Double € 80.- I-255-01

- incl. 2x ANL fuse - Weight; 0.5Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.45Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg Holland Marine Parts

Standard installation kit JT70 / JT90 Combi Aluminium boats pump inlet side

ART. NR: I-201-01

Use this number to order the complete kit. I-271-00 I-271-00 I-271-00 I-271-00

Each individual Installation Kit JT-70/90 Combi includes: 1x I-278-AL Water inlet 4” Aluminium 1x I-279-00 Socket 4” 1x I-313-00 Hexagon nipple 4” BSP, M/M 1x I-271-00 Elbow 90 degrees 4” BSP M/F SS316 1x I-269-GF Ball valve 4” BSP 1x I-275-01 Hose connector water intake 4”/114mm 1x I-268-01 Hose Dia 110mm L=1m/3.3ft 4x I-270-02 Hose clamp

I-304-00 I-304-00 I-304-00 I-304-00 I-303-00 I-303-00 I-303-00 I-303-00 I-313-00 I-313-00 I-313-00 I-313-00 I-306-00 I-306-00 I-306-00 I-306-00

I-304-00 I-304-00 I-304-00 I-304-00 I-303-00 I-303-00 I-303-00 I-303-00 I-306-00 I-306-00 I-306-00 I-306-00

water inlet side

prices/weights mentioned per piece Price

Art. nr.

Water inlet 4” (compl.) € 370.- I-278-AL Standard length

I-304-00 I-303-00 I-313-00 I-306-00 Socket 4” POM

I-278-AL I-278-AL I-278-AL I-278-AL I-267-AL

(continue on next page)

I-271-00 Inlet side

I-307-00 I-307-00 I-307-00 I-307-00 I-302-00 I-302-00 I-302-00 I-302-00 I-279-00 I-279-00 I-279-00 I-279-00

Description

Qty.

- Water inlet assembly JT70 / JT90. - Incl: Ring nylon, nut 4” Intake is protected with filter. - L=120 - Weight; 0.6Kg

I-308-00 I-308-00 I-269-GF I-269-00 I-275-01 I-275-00 I-270-00 I-270-02 I-270-00 I-268-01 I-268-00 I-270-00 I-270-02 I-270-00 € 90.-

I-279-00

I-307-00 I-302-00 I-279-00

- 4” BSP f/f - for connection and isolation of SS316 and aluminium parts - Weight; 0.7Kg

I-304-00 Hexagon nipple €42.- I-313-00 - 4” BSP m/m, SS316 I-303-00 - Weight; 1.5Kg I-310-00 I-331-00 I-308-00 I-309-00 I-306-00

I-307-00

I-331-00

I-278-AL

Elbow 90˚ € 95.- I-271-00

- 4” BSP, m/f, SS316 - Weight; 2.75Kg

Ball valve 4” BSP € 235.- I-269-GF

Ball valve 4” - composite / GRP - Weight: 2.5 Kg

Hose connector € 50.- I-275-01

- Threaded side 4” BSP, hose connection 4” / 110 mm - Weight; 0.9Kg

Water intake hose € 115.- I-268-01

- Ø 110 mm (4”), Standard length 1 meter, 3.3 ft, reinforced with metal spiral - Weight; 3Kg

Hose clamp € 15.- I-270-02

- Stainless Steel - galvanised bolt M8 - Weight; 0.16Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

JT70 / JT90 Combi Alu

Summary Jet Thruster components at page 9 12x I-331-00 Hose clamp 4x I-215-00 Hose connector 3”/76mm => 2” BSP 4x I-316-00 Elbow 45 degrees 2” BSP M/F SS316 4x I-368-00 Ball valve Composite, F/F, 2” BSP 4x I-322-00 Aluminium Nozzle 1x I-255-00 Fuse holder+fuses 1x I-151-50 Control panel with joysticks 12V 1x E-310-00 Controller + cables 1x I-377-00 Installation manual

NOZZLE

I-331-00 3-WAY VALVE

I-368-00

I-316-00

I-215-00

Complete installation kit € 3.621.Total weight installation kit: 36Kg

prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-70 / JT-90 77-94 mm. € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Steel galvanised - Double bolted

12x

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Thread 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve composite € 128.- I-368-00

- Ball valve 2” BSP composite - Weight; 0.75Kg

Nozzle Aluminum € 75.- I-322-00 - Custom lenght available upon request - total lenght 170 mm - Weight; 025Kg Fuse Holder Double € 80.- I-255-01

- incl. 2x ANL fuse - Weight; 0.5Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.45Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg

Holland Marine Parts

SKI Boat / Shallow Draft retro fit kit: JT system for shallow draft boats ART. NR: I-900-00

Use this number to order the complete kit. Each individual installation kit includes: 1x JTVS-30-SD Pump unit 1x I-158-00 Water inlet + filter 1x I-159-00 Angled flange 25 degrees 1x I-160-00 PVC ring 1x I-161-00 Nut 3” SS316 1x I-303-00 Ring, nylon 1x Installation manual

watch our installation video’s! www.youtube.com/user/hollandmarineparts

Complete retrofit kit € 4.763.- ex VAT prices/weights mentioned per piece Inlet side

Price

Art. nr.

Description

Qty.

€ 1.645.- JTVS-30-SD - pump unit JT30. - Weight; 26.24Kg

€ 74.- I-158-00

- water intake + filter - Weight; 1Kg

€142.- I-159-00

- Angled flange 250 SS316

- Weight; 1.43Kg

€ 40.- I-160-00

- PVC ring - Weight; 0.75Kg

€ 42.- I-161-00

- Nut 3” BSP SS316 - Weight; 0.9Kg

€ 5.- I-303-00

- Ring nylon 3” - Weight; 0.03Kg

Prior to ordering this kit: Check angle of hull at the location for the pump unit.

RETROFIT MasterCraft: X-star

Holland Marine Parts

D-008-03

All prices ex. VAT

JT30 SKI boat

Dedicated informative installation manual at our website! 1x V-100-00 3-Way directional valve 10M I-113-00 Flexible hose Go to www.jetthruster.com: 1x P-156-00 pump outlet straight 2” treaded homepage => support => installation manuals 3x I-317-00 Ball Valve, full flow, 2” BSP => Jet Thruster Retro Fit Kit for SKI Boat 3x I-115-00 Hose connector 2” / 51mm, tread 2”BSP 2x I-316-00 Elbow 45 degree, 2” BSP M/F 6x I-114-00 Hose Clamp 2x I-336-00 Nozzle 45 degree 1x I-150-50 Joystick panel 1x I-800-00 Air release kit 1x B-55L Battery Optima YellowTop 1x E-310-00 Controller + cables 1x I-255-00 Fuse holder single + fuse 1x I-377-00 Installation manual Total weight installation kit: 94Kg prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

€ 493.- V-100-50

- 3-way directional valve - Weight; 5.5Kg - Incl. controller cable 10m / 33ft E-302-00

€ 305.- I-113-00

- Hose, 2” - Reinforced / flexible - Weight; 12Kg

10m

€ 62.- P-156-00

- Pump outlet straight 2” threaded - Weight; 0.55Kg

€ 35.- I-317-00

- Ball valve 2” BSP - Weight; 1.5Kg

€ 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

€ 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

€ 5.- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

€ 110- I-336-10

- Compl. Incl. Venturi, ring nylon, guide ring pvc, nut 2” - Weight; 1.5Kg

Electrical € 215.- I-150-50 - Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg

€ 782.- € 660.- € 95.- € 27.-

E-310-00 E-300-00 E-301-00 E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable - Weight; 1.2Kg

1x 1x 1x

€ 40.- I-254-01 - fuse holder single + fuse - Weight; 0.2Kg

€ 140.- I-800-00 Air release kit, complete kit includes; - brass valve elecectricalactuated - Hose, rubber, 5m / - Thru hull outlet, SS316 - Hose connectors 3x - Hose clamps 3x - Weight; 1.8Kg

€ 306.- B-55L - Optima Yellow Top Weight; 28Kg - maintenance free - CCA (EN): 975 - AH:75

All prices ex. VAT

D-008-03

Holland Marine Parts

Water inlet combination Jet Thruster Vertical (incl. with pump unit) Included with pump unit Water intake 3” BSP € 110.- I-302-00

- water inlet assembly JT30 / JT50 Vertical. - Incl: seal, guidering and butterfly valve. (see below) - Weight; 2.2Kg

Guide ring PVC € 39.- I-282-00 - Ring for water inlet

Nut € 19.- I-304-00

- SS316 - Set contains 4 pieces - Weight; 0.3Kg

Ball valve € 35.- I-317-00

- Brass-chrome - Weight; 0,75Kg

Nylon € 5.- I-303-00 - Ring nylon

SIKA SIKA

Holland Marine Parts

D-008-03

All prices ex. VAT

JT30 / JT50 Single vert.

Standard installation kit JT30 / JT50 Vertical Single ART. NR: I-700-00

Use this number to order the complete kit. Each individual Installation Kit JT30/JT50 Single includes: 6x I-114-00 Hose clamp 2x I-115-00 Hose connector SS316 2x I-316-00 Elbow 45 degree SS316 M/F 2x I-317-00 Ball valve 2” BSP 1x I-254-00 Fuse holder + fuse 1x I-150-50 Control panel with Joystick 1x E-310-00 Controller kit 1x I-377-00 Installation manual Total weight installation kit: 11Kg

NOZZLE

I-114-00 3-WAY VALVE

I-317-00

I-316-00

I-115-00

Complete installation kit € 1.267.- prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-30 / JT-50 48-60 mm. € 5.- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

- Brass-chrome - Weight; 1.5Kg

Fuse Holder Single € 40.- I-254-01

- incl. 1x ANL fuse - Weight; 0.2Kg

Joystick panel Single € 215- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg

Holland Marine Parts

JT30 / JT50 Combi vert.

Standard installation kit JT30 / JT50 Vertical Combi ART. NR: I-701-00

Use this number to order the complete kit. NOZZLE

Each individual Installation Kit JT-30/50 Single includes: 12x I-114-00 Hose clamp 4x I-115-00 Hose connector SS316 4x I-316-00 Elbow 45 degree SS316 M/F 4x I-317-00 Ball Valve 2” BSP F/F 1x I-254-00 Fuse holder + fuse 1x I-151-50 Control panel with Joystick 1x E-310-00 Controller kit 1x I-377-00 Installation manual

Complete installation kit € 1.572.-

I-114-00 3-WAY VALVE

I-317-00

I-316-00

I-115-00

Total weight installation kit: 15Kg prices/weights mentioned per piece

Pressure side

Description

Qty.

Hose clamp JT-30 / JT-50 € 5.- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

12x

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

- Brass-chrome - Weight; 1.5Kg

Fuse Holder Single € 40.- I-254-01

- incl. 1x ANL fuse - Weight; 0.2Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

Holland Marine Parts

Price

Art. nr.

1x 1x 1x

- Weight; 1,2Kg

D-008-03

All prices ex. VAT

JT30 / JT50 Single alu vert.

Standard installation kit JT30 / JT50 Vertical Single Aluminium boats ART. NR: I-700-01

Use this number to order the complete kit. Each individual Installation Kit JT-30/JT-50 Vertical Single includes: 6x I-114-00 Hose clamp 2x I-115-00 Hose connector SS316 2x I-316-00 Elbow 45 degree ss316 M/F 2x I-368-00 Ball valve 2” Composite F/F 2x I- Nozzle Aluminium 1x I-254-00 Fuse holder + fuse 1x I-150-50 Control panel with Joystick 1x E-310-00 Controller kit 1x I-377-00 Installation manual Total weight installation kit: 15Kg

I-114-00 3-WAY VALVE I-322-00 I-368-00

I-316-00

I-115-00

Complete installation kit € 1.603.- prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-30 / JT-50 € 5.- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve composite € 128.- I-368-00

- Ball valve 2” BSP composite - Weight; 0.75Kg

Nozzle Aluminum € 75.- I-322-00

- Ø 60mm Compl. incl. venturi - Custom lenght available upon request - total lenght 170 mm - Weight; 0.25Kg

Fuse Holder Single

- incl. 1x ANL fuse

€ 40.-

I-254-01

- Weight; 0.2Kg

Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg Holland Marine Parts

JT30 / JT50 Combi alu vert.

Standard installation kit JT30 / JT50 Vertical Combi Aluminium boats Art. nr.: 1-701-01

ART. NR: I-701-01

Use this number to order the complete kit. Each individual Installation Kit JT-30/50 Vertical Combi includes: 12x I-114-00 Hose clamp 4x I-115-00 Hose connector SS316 4x I-316-00 Elbow 45 degree SS316 M/F 4x I-368-00 Ball Valve Composite 2” BSP F/F 2x I-322-00 Nozzle Aluminium 1x I-254-00 Fuse holder + fuse 1x I-151-50 Control panel with Joystick 1x E-310-00 Controller kit

I-114-00 3-WAY VALVE

I-322-00 I-368-00

I-316-00

I-115-00

1x I-377-00 Installation manual Total weight installation kit: 14Kg

Complete installation kit € 2.244.- prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-30 / JT-50 € 5.- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

12x

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Thread 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve composite € 128.- I-368-00

- Ball valve 2” BSP composite - Weight; 0.75Kg

Nozzle Aluminum € 75.- I-322-00

- Ø 60mm Compl. incl. venturi - Custom lenght available upon request - total lenght 170 mm - Weight; 0.25Kg

Fuse Holder Single

- incl. 1x ANL fuse

€ 40.-

I-254-01

- Weight; 0.2Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller (Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

Holland Marine Parts

1x 1x 1x

- Weight; 1,2Kg D-008-03

All prices ex. VAT

JT70 / JT90 Single vert.

Standard installation kit JT70 / JT90 Vertical Single ART. NR: I-702-00

Use this number to order the complete kit. Each individual Installation Kit JT70/JT90 Single vertical includes:

NOZZLE

6x I-331-00 Hose clamp 2x I-215-00 Hose connector SS316 2x I-316-00 Elbow 45 degree SS316 M/F 2x I-317-00 Ball valve 2” BSP 1x I-254-00 Fuse holder + fuse 1x I-150-50 Control panel with Joystick 1x E-310-00 Controller kit 1x I-377-00 Installation manual Total weight installation kit: 11Kg

I-114-00 3-WAY VALVE

I-317-00

I-316-00

I-115-00

Complete installation kit € 1.447.- prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-70 / JT-90 € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Double bolted - Steel galvanised

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Thread 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

Ball valve 2” - Brasee / Chrome

Fuse Holder Double € 80.- I-255-01

- incl. 2x ANL fuse - Weight; 0.5Kg

Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller

(Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

All prices ex. VAT

D-008-03

1x 1x 1x

- Weight; 1,2Kg

Holland Marine Parts

JT70 / JT90 Combi vert.

Standard installation kit JT70 / JT90 Vertical Combi ART. NR: I-703-00

Use this number to order the complete kit. Each individual Installation Kit JT70/JT90 Single vertical includes:

NOZZLE

12x I-331-00 Hose clamp 4x I-215-00 Hose connector SS316 4x I-316-00 Elbow 45 degree SS316 M/F 4x I-317-00 Ball valve 2” BSP 1x I-254-00 Fuse holder + fuse 1x I-150-50 Control panel with Joystick 1x E-310-00 Controller kit 1x I-377-00 Installation manual Total weight installation kit: 11Kg

I-114-00 3-WAY VALVE

I-317-00

I-316-00

I-115-00

Complete installation kit € 1.892.- prices/weights mentioned per piece Pressure side

Price

Art. nr.

Description

Qty.

Hose clamp JT-70 / JT-90 € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Double bolted - Steel galvanised

12x

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Thread 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Elbow 45˚ € 47.- I-316-00

- 2” BSP, m/f, SS316 - Weight; 0.75Kg

Ball valve 2” BSP € 35.- I-317-00

Ball valve 2” - Brasee / Chrome

Fuse Holder Double € 80.- I-255-01

- incl. 2x ANL fuse - Weight; 0.5Kg

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg - Incl. pigtail for connection to controller

(Push button controls available)

Controller € 782.- E-310-00 € 660.- E-300-00 € 95.- E-301-00 € 27.- E-304-00

Incl.: - Controller - Controller to joystick cable - Controller power cable

Holland Marine Parts

1x 1x 1x

- Weight; 1,2Kg

D-008-03

All prices ex. VAT

Product group: Pump outlet for pump units

- Weight; 0.25Kg

Pump outlet straight JT-30 /JT-50 € 47.- P-142-00 Pump outlet straight JT-70 /JT-90 € 60.- P-242-00

JT-30 /JT-50

(prices mentioned per piece)

- Ø 2” / 51 mm, SS316 Compl. Seal rubber, nuts, bolds, rings, plug to drain system - Weight; 0.6Kg - Ø 3” / 76 mm, SS316 Compl. Seal rubber, nuts, bolds, rings, plug to drain system - Weight; 0.8Kg

JT-70 /JT-90

Pump outlet 90˚ JT-30 /JT-50 € 110.- P-122-00 Pump outlet 90˚ JT-70 /JT-90 € 131.- P-222-00

JT-30 /JT-50

- Ø 2” / 51 mm, SS316 Compl. Seal rubber, nuts, bolds, rings, plug to drain system - Weight; 1Kg - Ø 3” / 76 mm, SS316 Compl. Seal rubber, nuts, bolds, rings, plug to drain system - Weight; 1.6Kg

JT-70 /JT-90

Pump outlet 90˚ JT-30 /JT-50 € 110.- P-513-52

- Ø 2” / 51 mm, SS316 - Outlet for Jet Thruster compact

JT-30 /JT-50

€ 62.- P-156-00

- Pump outlet straight 2” threaded - Weight; 0.55Kg

3-Way Hose connector JT-30 / JT-50 € 88.- P-154-00 3-Way Hose connector JT-70 / JT-90 € 102.- P-258-00

- Ø 2” / 51 mm, SS316 for 2” hose - Weight; 0.9Kg - Ø 3” / 76 mm, SS316 for 3” hose - Weight; 1.55Kg

JT-30 /JT-50

JT-70 /JT-90

2-Way 90˚ Hose connector JT-30 / JT-50 € 145.- P-155-00 2-Way 90˚ Hose connector JT-70 / JT-90 € 160.- P-259-00

JT-30 /JT-50

JT-70 /JT-90

2-Way 90˚ Hose connector JT-30 / JT-50 € 145.- P-507-52

- Ø 2” / 51 mm, SS316 - Weight; 1,1Kg

JT-30 /JT-50 Seal for pump outlet € 5,50 P-260-00

- Rubber - Weight; 0.028Kg

Air release valve

Air release kit, complete kit includes;

€ 140.-

I-800-00

All prices ex. VAT

D-008-03

- Brass valve elecectrical actuated - Hose, rubber, 5m / Ø 8mm - Thru hull outlet, SS316 - Hose connectors 3x - Hose clamps 4x - Weight; 1.8Kg

Holland Marine Parts

prices/weights mentioned per piece Product group: Hoses / Hose clamps pressure side Flexible hose JT-30 / JT-50 € 30,50.- I-113-00 (1 m)

- Ø 2” Standard available length 10m/33Ft - 15m/50ft - Metal spiral reinforced (custom length in meters/feet possible) - Weight; 1.1Kg

Hose clamp JT-30 / JT-50 € 5 .- I-114-00

- for 2” hose - Weight; 0.25Kg - Steel galvanised - Double bolted

Flexible hose JT-70 / JT-90 € 36,50.- I-213-00 (1 m)

- Ø 2,5” Metal spiral reinforced (custom length in meters/feet possible) - Weight; 3.18Kg/m

Hose clamp JT-70 / JT-90 € 9.- I-331-00

- for 3” / 76 mm hose - Weight; 0.6Kg - Steel galvanised - Double bolted

prices/weights mentioned per piece Product group: Hose connectors / ball valve pressure side

Hose connector JT-30 / JT-50 € 18.- I-115-00

- Threaded side: 2” BSP, SS316 - Hose connection 2” / 51 mm - Weight; 0.6Kg

Hose Connector JT-70 / JT-90 € 76.- I-215-00

- Threaded side: 2” BSP, SS316 - Hose connection 3” / 76 mm - Weight; 1Kg

Ball valve

- Brass-chrome

- 2” BSP f/f - 2,5” BSP f/f

Holland Marine Parts

€ 35.- € 88.-

I-317-00 I-309-00

D-008-03

All prices ex. VAT

prices/weights mentioned per piece Product group: Nozzles weldable Nozzle Steel € 33.- I-318-00

- Ø 60mm Compl. incl. steel venturi - Custom lenght available upon request - Weight; 1.5Kg

170 mm

Nozzle SS316 € 95.- I-320-00

- Ø 60mm Compl. incl. venturi - Custom lenght available upon request - Weight; 1.1Kg

220 mm

Nozzle Aluminum € 75.- I-322-00 170 mm

- Ø 60mm Compl. incl. Venturi - Custom lenght available upon request - total height 170 mm - Material ALMg3/3.353 - Weight; 0.25Kg

Venturi Steel Venturi SS316 Venturi Aluminum

- Ø 36 mm JT-30 / JT-50 - Ø 36 mm JT-30 / JT-50 - Ø 36 mm JT-30 / JT-50

€ 8.- € 21.- € 18.-

I-119-00 I-121-00 I-123-00

Water inlet 4” (compl.) optional: € 152.- I-259-00 Extended length

Ø 46mm JT-70 / JT-90

- Incl: Ring nylon, seal, nut 4” Intake is protected with filter. - L=205mm - Weight; 2.5Kg

205 mm

Did you know all water inlets have a filter? No more issues with ropes / plastics!

All prices ex. VAT

D-008-03

Holland Marine Parts

(prices mentioned per piece/weight)

Product group: Nozzles SS316 Flanged threaded non weldable Angle 0˚ € 85.- I-324-10 - Compl. incl. venturi, ring nylon, nut 2” - Weight; 0.8Kg

JT 30

€ 65.- I-324-20

JT 70

JT 50

- Compl. incl. ring nylon, nut 2” - Weight; 0.7Kg

JT 90

Angle 25˚ € 95.- I-330-10

JT 30

- Compl. incl. venturi, ring nylon, guide ring pvc, nut 2” - Weight; 1Kg

JT 50

€ 75.- I-330-20

JT 70

- Compl. incl. ring nylon, guide ring pvc, nut 2” - Weight; 0,9Kg

JT 90

Angle 35˚ € 105.- I-333-10

JT 30

- Compl. incl. venturi ring nylon, guide ring pvc, nut 2” - Weight; 1.1Kg

JT 50

€ 85.- I-333-20

JT 70

- Compl. incl. ring nylon, guide ring pvc, nut 2” - Weight; 1Kg

Angle 45˚ € 110.- I-336-10 - Compl. incl. venturi, ring nylon, guide ring pvc, nut 2” - Weight; 1.4Kg € 90.- I-336-20 - Compl. incl. ring nylon, guide ring pvc, nut 2” - Weight; 1.4Kg € 125.- I-336-10SY € 105.- I-336-20SY Angle 55˚

€ 125.-

I-339-10

JT 90 JT 30 JT 50

Curved flange for curved hull (sailboats) - Compl. incl. venturi, ring nylon, guide ring pvc, nut 2” - Weight; 1.4Kg - Compl. incl. ring nylon, guide ring pvc, nut 2” - Weight; 1.4Kg

JT 70 JT 90

- Compl. incl. venturi, ring nylon, guide ring pvc, nut 2”

JT 30

- Weight; 2Kg

JT 50

€ 105.- I-339-20

JT 70

- Compl. incl. ring nylon, guide ring pvc, nut 2” - Weight; 2Kg

JT 90

Angle 65˚

JT 30

€ 165.-

I-341-10

- Compl. incl. venturi, ring nylon, guide ring pvc, nut 2” - Weight; 2,4Kg

€ 145.- I-341-20

JT 50

- Compl. incl. ring nylon, guide ring pvc, nut 2” - Weight; 2,4Kg

JT 70

JT 90

90˚ Transom nozzle € 125.- I-142-00 - Compl. incl. ring nylon, rubber nut 2” - Weight; 1,9Kg

JT 30

€ 125.- I-243-00

JT 70

JT 50

- Compl. incl. ring nylon, rubber nut 2” - Weight; 1.6Kg

Holland Marine Parts

JT 90 D-008-03

All prices ex. VAT

HULL 65°

waterline 7-10 cm.

HULL 45°

To determine the nozzles angle: Fold dashed red lines

Choose the correct nozzle angle, 00, 250, 350, 450, 550 are available nozzle angles.

HULL 55°

HULL 35°

HULL 25°

Nozzle angle determinator

Product group: Fittings Water intake

(prices mentioned per piece/weight)

Elbow 90˚

€ 46.- € 60.-

I-367-00 I-307-00

- 2” BSP, f/f, SS316 Weight; 0.65Kg - 3” BSP, f/f, SS316 Weight; 1.5Kg

Elbow 45˚

€ 46.- € 55.- € 66.- € 95.-

I-366-00 I-315-00 I-354-00 I-273-00

- 2” BSP, f/f, SS316 Weight; 0.5Kg - 2,5” BSP, f/f, SS316 Weight; 0.8Kg - 3” BSP, f/f, SS316 Weight; 1.2Kg - 4” BSP, f/f, SS316 Weight; 2Kg

Elbow 45˚

€ 47.- € 65.- € 67.- € 115.-

I-316-00 I-357-00 I-364-00 I-272-00

- 2” BSP, m/f, SS316 Weight; 0.75Kg - 2.5” BSP, m/f, SS316 Weight; 1.2Kg - 3” BSP, m/f, SS316 Weight; 1.7Kg - 4” BSP, m/f, SS316 Weight; 2.8Kg

Elbow 90˚

€ 52.- € 57.- € 93.- € 95.-

I-361-00 I-358-00 I-355-00 I-271-00

- 2” BSP, m/f, SS316 Weight; 0.6Kg - 2.5” BSP, m/f, SS316 Weight; 1Kg - 3” BSP, m/f, SS316 Weight; 1.5Kg - 4” BSP, m/f, SS316 Weight; 2.75Kg

Reducer

€ 41.-

I-308-00

- 3” X 2,5” BSP, m/m, SS316 Weight; 0.6Kg

Nipple

€ 15.-

I-165-00

- Hexagonal nipple 2” BSP M/M

Hose connector

€ 18.- € 37.- € 50.-

I-115-00 I-310-00 I-275-01

- Threaded side 2” BSP, hose connection 2” / 76--51 mm Weight; 0.6Kg - Threaded side 2,5” BSP, hose connection 3” / 76 mm Weight; 0.5Kg - Threaded side 4” BSP, hose connection 4” / 110 mm Weight; 0.9Kg

Thru hull hoseconnector € 350.- I-276-00

- Hose connection: both sides 3” / 76 mm - For making water tight thru hull or bulkhead connections for hoses - SS316, incl. SS nut, seal and ring - Weight; 3Kg

Thru hull hoseconnector € 240.- I-277-00

- Hose connection: one side 3” / 76 mm, one side thread 2½” BSP - For making water tight thru hull or bulkhead connections for hoses - SS316, incl. SS nut, seal and ring - Weight; 1.4Kg

Holland Marine Parts

D-008-03

All prices ex. VAT

(prices mentioned per piece)

Miscellaneous parts Flanged threaded nozzles / 90˚ Transom nozzle 3” BSP female threaded socket

€ 42.-

I-363-00

Venturi flange treaded nozzle Ø 36mm JT-30 / JT-50

€ 20.-

I-125-00

Hose connector 1/8 x 8mm € 9,50.- I-806-00

1/8 thread x 8 mm hose connection SS316 (for airvalve and winterizing connections)

Nut for water inlet € 19.- I-304-00

- SS316 Ø 3” BSP - SS316 - Weight; 0.320Kg

Nut for water inlet € 28.- I-261-00

- SS316 Ø 4” - Weight; 0.8Kg

Nut 2” BSP € 8.- I-326-00

- 2” BSP - SS316 - For flanged threaded nozzles incl. transom nozzle

- Weight; 0.238Kg

Nylon Ring Ø 2” € 5.- I-327-00 Nylon Ring Ø 3” BSP € 5.- I-303-00 Nylon Ring Ø 4” € 7.- I-274-00

- Suitable for all Flanged treaded nozzle and 90˚ transom nozzles - Weight; 0.009Kg - Nylon - Weight; 0.018Kg - Rubber - Weight; 0.030Kg

Wet Wipe Tissues € 22,- I-391-00 - Ideal product to remove excessive Poly-Urethane sealant. With use of Wet Wipes Tissues you can easily remove Poly-Urethane stains and excessive sealant. The easy to use Wet Wipe Tissues enable you to clean Jet Thruster parts, tools, hands etc. These tissues are the preferred product to clean the very sticky and tough to remove Poly-Urethane adhesives. Wet Wipes clean better than any other product we tested.

- Dispenser contains 150 pcs wet wipe tissues

- This product will help you to deliver a spotless installation!

PU sealant for SS316 connections € 13,50.- I-390-00

- Wurth - Adhesive for connection of SS316 threads - Structural adhesive - Resistant against: water, salt water

watch our video’s at our YouTube channel for correct application www.youtube.com/user/hollandmarineparts All prices ex. VAT

D-008-03

Holland Marine Parts

(prices mentioned per piece)

Miscellaneous parts Flanged threaded nozzles / 90˚ Transom nozzle Cover for relais of pump unit € 20.- P-301-00

- Cover for pump relais Jet Thruster JT70 / JT90 - Weight; 0.124Kg

€ 20.-

P-508-00

- Cover for pump relais Jet Thruster compact

Cover for 3-Way valve Cover for 3-Way valve

€ 20.- € 20.-

P-302-00 P-303-00

JT-30 AND JT-50 Weight; 0.117Kg JT-70 AND JT-90 Weight; 0.133Kg

(prices mentioned per piece)

Batteries

€ 306.-

B-55L

Optima Yellow Top S5,5L

- Maintenance free - CCA (EN): 975 - Ah:75 - Weight; 27,2Kg

Battery main switch € 159.- E-102-00 JT30 JT50 JT70 JT90

- Cable shoe connection MIO - Housing; steel - Handle; steel - Weight; 0.75Kg - Heavy duty switch

80mm

110mm

28mm

Zinc Anode (pump outlet) € 175.- CP-001-00 JT30-JT50 CP-002-00 JT70-JT90 Zinc anode system for Jet Thruster pump units

Choose which is preferred for the installation and available space.

€ 56.- € 56.-

CP-004-00 Replacement Zinc anode JT30/ JT50 CP-006-00 Replacement Zinc anode JT70/ JT90

Zinc Anode (pump inlet) € 195.- CP-050-00 JT70-JT90 Zinc anode system for Jet Thruster pump units

Holland Marine Parts

€ 85.-

CP-050-00 Replacement Zinc anode

D-008-03

All prices ex. VAT

(prices mentioned per piece)

Accessories Joystick panel Single € 215.- I-150-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.3Kg

- Push buttons

€ 200.-

I-152-50

Joystick panel Combi € 290.- I-151-50

- Aluminum anodized front plate - illuminated on/off switch IP67 - Joystick IP67 - Bracket compl. SS316 - Weight; 0.5Kg

- Push buttons

€ 265.-

I-153-50

Series Parallel Switch € 330.- I-356-02

JT-50 24V / JT-70 24V / JT-90 24V - Creates a temporary 24V power supply out of 2x 12V batteries to power the 24V Jet Thrusters - Weight; 1.5Kg

Wireless control system for Single and Combi Jet Thrusters

- For Single Jet Thruster systems, incl. cable controller - For Combi Jet Thruster systems, incl. cable controller

€ 484.- € 584.-

I-400-50 I-401-50

Fuse Holder Single € 33.- I-254-00

- ex. fuse - Weight; 0.2Kg

Fuse Holder Double € 66.- I-255-00

- ex. fuses - Weight; 0.4Kg

Fuse ANL

- 425A - 500A

All prices ex. VAT

€ 7.- € 7.-

D-008-03

I-257-00 I-266-00

Holland Marine Parts

Maximum control! Wireless docking for your Vessel

Holland Marine Parts Jet Thrusters can be controlled with the dedicated Wireless Control Unit. Docking and maneuvering with maximum control! • Water resistant (IP65) • Industrial quality • Comfortable grip Complete kit contains: Transmitter, Receiver and antenna.

Jet Thruster Single

484.-

Jet Thruster Comb i

584.-

Frequency 433 & 869 MHz , 1 channels Modulation type FM-Modulation Code comb. 16.777.216 Radio type PLL Synthesizer Output 7 mW (by 50 ohm) Buttons 2/4 x 1-step buttons No. of batteries 3 Batteries exchangable Type of batteries 1.5V AAA Weight ~ 120 gr / ~ 0.3 lb Dimensions ~ 66 x 113 x 35 mm / ~ 2.6 x 4.4 x 1.4 in Water resistant IP65

Holland Marine Parts

Frequency 433 & 869 MHz , 1 channels No. of function relays 4 Duplex No Power supply 12-24V DC & 230V AC & 115V AC & 24V AC Max current consumption 10-300 Dimensions ~ 133 x 120 x 45 mm / ~ 5.2 x 4.7 x 1.8 in Protection IP65 Radio type Double superheterodyne Sensitivity -100 dBm Bus system None Relay functionality Momentary, Latching, Interlocking Antenna 1 external BNC Temperature -20 to +55 C / -4 to +130 F 869 MHz: ASM= 12-24V AC, BSM= 230V AC Max. number of transmitters 40 D-008-03

All prices ex. VAT

Jet Thruster pump units & specifications

JT-30 compact 66 thrust LBS 12V Force Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Water inlet Water outlet Pressure hose diameter Weight pump

30 Kgf 12V 3kW 480A 500A 1 x Optima Yellow Top 55Ah 1m -> 50mm2 / 3ft -> 1/0 AWG 1 x Ø 90 mm Nozzle Ø 36mm/1,26” 2” / 51 mm 19kg/42LBS

JT-70 154 thrust LBS 24V Force Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Water inlet Water outlet Pressure hose diameter Weight pump

70 Kgf 24V 11kW 800A 850A (2x 425A) 4 x Optima Yellow Top 75Ah 1m -> 70mm2 / 3ft -> 3/0 AWG 1 x Ø 4” Nozzle Ø 50mm 3” / 76 mm 49 kg/95 LBS

JT-50 compact 110 thrust LBS 24V Force Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Water inlet Water outlet Pressure hose diameter Weight pump

50 Kgf 24V 6kW 480A 500A 2 x Optima Yellow Top 75Ah 1m -> 50mm2 / 3ft -> 1/0 AWG 1 x Ø 90 mm Nozzle Ø 36mm/1,26” 2” / 51 mm 25 kg/55 LBS

JT-90 198 thrust LBS 24V Force Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Water inlet Water outlet Pressure hose diameter Weight pump

90 Kgf 24V 15,5kW 1000A 1000A (2x 500A) 4 x Optima Yellow Top 75Ah 1m -> 95mm2 / 3ft -> 4/0 AWG 1 x Ø 4” Nozzle Ø 50mm 3” / 76 mm 61 kg/130 LBS

Installation manual with product specifications at: www.hollandmarineparts.nl/download

All prices ex. VAT

D-008-03

Holland Marine Parts

Packaging All mentioned prices in this catalog are EXCL Packaging costs / Ex Works. In case Holland Marine Parts needs to provide/ apply packaging: The complete Jet Thruster unit will be packed with wooden, high quality and strong packaging material: Based upon the quantity of the order, modular rims are used to created the correct transport volume. Packaging includes: -

Euro pallet (120x80cm) (27Kg) Wooden modular rims (120x80x20cm) Wooden lit (120x80cm) Metal Straps Heat treated wooden packaging upon request

120 cm. 80 cm.

54 cm.

Dimensions: (net. packaging weight) -

2 rim crate: 120x80x54 3 rim crate: 120x80x74 4 rim crate: 120x80x94

49Kg 58Kg 60Kg

Prize Euro 110,Euro 125,Euro 140,-

Preferred logistic supplier

express

Holland Marine Parts

D-008-03

All prices ex. VAT

Optima batteries are the preferred power source for Jet Thruster systems

All prices ex. VAT

D-008-03

Holland Marine Parts

GENERAL COMMERCIAL TERMS AND CONDITIONS General Commercial Terms and Conditions of Holland Marine Parts B.V. Donker Duyvisweg 297 3316 BL Dordrecht The Netherlands

Applicability of the Present General Terms and Conditions

1. The present General Terms and Conditions shall apply to all offers and to all agreements concerning engines, machines and components. Unless the opposite appears explicitly,

the present General Terms and Conditions shall equally apply to the assembly, disassembly, repair and other activities. The General Terms and Conditions of the customer shall

not be binding on us, unless we have agreed to the contrary in writing.

2. The stipulations of the present General Terms and Conditions shall always remain in force, unless otherwise agreed upon in writing. 3. Each and every assignment or offer given orally or in writing by staff in the service of the contracting party, be they authorised to do so or not, on behalf of the contracting party,

shall be binding on the contracting party. If the contracting party is not bound, then the party that concluded the agreement is deemed to be the contracting party.

4. In the present General Terms and Conditions “us” and “we” shall always refer to Holland Marine Parts B.V., whereas contracting party shall refer to our other party. 5. The nullity or annubility of any clause in the present General Terms and Conditions shall not prejudice the validity of the other clauses. II

Offer and Confirmation of the Order

1. Our offers shall be without obligation in every respect, unless explicitly stated otherwise. We shall only be bound, having due regard to the stipulations hereinafter in the present

General Terms and Conditions, when we have confirmed the order in writing. The same shall apply to potential additions and/or changes to the order.

2. The text of our order confirmation shall determine the contents of the order. Arrangements or agreements with employees shall not be binding on us, to the extent they have

not been confirmed in writing by us.

3. All technical data can only be deemed to have been given to the contracting party as an approximation. 4. All drawings, illustrations, dimensions and weights given, shall remain our property under explicit reservation of copyrights and patent rights. Subject to our consent in writing,

the contracting party shall not be allowed to copy said documents, to make them available for inspection to any third party or to make them otherwise available to any such third party.

The contracting party shall hold us harmless against claims of third parties, including all extra judicial and judicial costs, that we have to make or pay to claimants,

if the contracting party violates the provisions of this subsection.

III. Prices and Packaging 1. Unless otherwise agreed upon in writing, prices shall be based on delivery at our enterprise in Dordrecht (ex Works). 2. The prices given, shall be exclusive of value added tax, unless stated otherwise. 3. If so required, packaging shall be charged at cost price and shall not be taken back. The decision as to the necessity to use packaging or not shall be made at our sole discretion. 4. If there are any changes in price, currency fluctuations, devaluation or revaluation of the Euro compared to any foreign currency or any changes to salaries, import duties or

other taxes, social contributions or government levies, freight, etc., even if these changes occur due to circumstances that could already have been foreseen when the offer was

made or accepted in writing, we shall be entitled to modify the sales prices and the costs for assembly, disassembly, repair and other costs, accordingly.

Holland Marine Parts

D-008-03

All prices ex. VAT

IV Delivery and Delivery Period 1. Goods shall be delivered at our enterprise in Dordrecht (ex Works). Delivery periods shall be determined approximately. 2. The delivery period shall commence when we have confirmed the order in writing, when all formalities required to start the activities have been complied with, when all necessary

documents are in our possession and when the contracting party has provided us with all the data concerning the order. In the event of instalments, the delivery period shall only

commence following receipt of the first instalment.

3. The delivery period shall be determined on the assumption that the necessary materials in the broadest sense of the word, be delivered to us in due time. 4. Exceeding the delivery period can never lead to any claim to damages, not even following a notice of default. 5. With respect to the delivery period, the goods shall be deemed to have been delivered when they are ready at our enterprise in Dordrecht and/or at the location referred to in

our order confirmation and/or are made available at another location to be specified, all this after we have informed the contracting party thereof in writing. If we have accepted

to assemble the goods, the goods shall be deemed to have been delivered in respect of the delivery period, when they have been made available at the place of delivery agreed

upon.

6. From the moment the goods are deemed to have been delivered by virtue of section 5 of the present article, the risk of all direct and indirect damage to or in connection with said goods,

sustained by the contracting party, shall be for the latterâ&#x20AC;&#x2122;s account.

V. Transport 1. From the moment they are shipped by or to us, all goods and materials shall be transported for the risk of the contracting party. Even in the case delivery carriage paid has been

agreed upon, the contracting party shall be liable for all damage (such as damage caused by transport, fire and water, theft or embezzlement) to the goods during transport.

The contracting party shall be under the obligation to take out an insurance to cover said risk, with the exclusion of recourse by the insurer(s) against us, our employees

and/or supporting personnel.

2. The contracting party shall have to verify the condition the goods are in upon their arrival. 3. Without prejudice to the above, we shall not be liable for any damage whatsoever caused to the goods or not in connection with the transport. VI Assembly 1. Unless otherwise agreed upon in writing, the assembly of the goods shall not be included in the delivery. 2. If an order to assemble the goods is given without a complete listing in writing of the activities the contracting party wants us to carry out, and if such activities are equally not referred to in

the order confirmation, the agreement shall be deemed to include the activities we deem necessary.

3. The staff charged by us with the assembly, shall limit themselves to the assembly of the material supplied by us and/or the material that was included in the order. We shall not

be responsible for assembly or repair work beyond the scope of the agreement or for any work done by third parties to materials, machines and/or machine components

delivered by us.

4. When, through no fault of ours, the assembly work cannot be arranged for or done without interruption or is delayed in any other way, we shall be entitled to charge on the

corresponding additional costs to the contracting party at the normal rate.

5. All potentially extra costs shall be for the account of the contracting party, more in particular:

a travel and accommodation expenses and cost of living of the technician(s);

b costs arising due to the fact that the assembly work cannot be done during usual day hours.

6. Upon completion of the assembly and when the goods have been put into operation, the assembly shall be deemed to have been carried out properly. 7. If the contracting party wishes to call on our services after assembly of the goods and after they have been put into operation or afterwards wishes to call in our assistance to

inspect the goods sold / delivered, we shall be entitled to a reimbursement of expenses at the usual rate, to be increased by travel and accommodation expenses.

VII Liability 1. Neither we, nor our employees and/or our supporting personnel, shall be liable for any damage whatsoever, be it direct or indirect, regarding work done in the broadest sense

of the word or regarding goods delivered pursuant to the agreements to which the present General Terms and Conditions apply.

2. Without prejudice to the stipulations of section 1, we shall only be liable for damage if the contracting party proves that the damage is due to gross negligence or intent on the part of

the directors of Holland Marine Parts B.V.. We shall not indemnify the contracting party against gross negligence or intent on the part of our personnel or our supporting personnel,

neither shall we indemnify the contracting party vis Ă vis any third party. Damage that has not been established by an expert appointed by us, shall never be considered to be damage.

Under no circumstances shall we be liable for any kind of indirect damage whatsoever, no matter by whom such damage is sustained, including in particular consequential loss and/or

the loss of time.

3. The contracting party shall be liable for all damage sustained by us or by our subordinates or supporting personnel, caused through the fault of the contracting party, including

but not limited to, damage resulting from defects to or the nature of the goods delivered or made available by the contracting party, or otherwise due to circumstances which

are reasonably for the risk of the contracting party.

4. The contracting party shall be under the obligation to state special characteristics or characteristics that pose a risk, of material made available by the contracting party, without

such statement releasing the contracting party from the liability resulting from section 3 and the contracting party shall be under the obligation to indemnify us at its expense

against all claims or titles of third parties and the consequences thereof, including measures to seize property before judgement.

All prices ex. VAT

D-008-03

Holland Marine Parts

5. The contracting party shall have to forthwith inform us of shortcomings or defects to repairs or deliveries that have been discovered, at any rate not later than three working days

from the day the shortcoming or defect was discovered, and to do all that is necessary to limit the damage, all this under penalty of the loss of any right to damages or warranty..

6. If the contracting party wants to carry out an expertâ&#x20AC;&#x2122;s appraisal (have such carried out), it shall have to inform us thereof in due time in order to enable the latter to be present, together

with the latterâ&#x20AC;&#x2122;s own experts or not, all this under penalty of the loss of any right to damages or warranty.

7. Notwithstanding any other provision, our liability shall never exceed a maximum of (25.000) twenty five thousand Euros. VIII Warranties 1. Having due regard to the restrictions to be listed hereinafter, we shall undertake to repair or replace the new engines or machines we have delivered, which show a defect within a

period of 24 months from the day of delivery as referred to in article IV, provided the defect is forthwith reported to us by telephone or in writing and provided that the defect is

caused solely by faulty material or a faulty construction. The warranty shall not apply if the goods malfunction due to other causes such as normal wear and tear, unsuited kinds

of fuel, lubricants, sealing and insulation material, measuring equipment, overloading, poor foundations, aggressive cooling water, faulty air supply, faulty piping, incorrect conduits,

improper handling or accidents as well as in those cases in which the cause is not evident beyond doubt. The obligations under warranty do not comprise the burden to carry costs

of cranage, electricity, docking, diving, dismounting, or travel and boarding costs.

2. With respect to the assembly, disassembly, repair and other work done by us, a warranty shall only be given for the reliability of the execution of the work done, unless explicitly

otherwise agreed upon.

3. The obligations under the warranty shall lapse if the contracting party has made any changes or has done any repair work to the goods delivered on its own initiative during the term

of warranty, or has had such done by a third party, or if, in our opinion, the contracting party has failed to properly service the goods delivered.

4. None of the indirect or direct damage, including consequential damage, sustained due to the malfunctioning of the goods delivered, shall be compensated. 5. We shall not be held to fulfil any obligation under the warranty if the contracting party fails to comply in a proper or timely manner with its obligation to pay or with any other

obligation that might result from any agreement the contracting party has concluded with us.

6. No warranty shall be given for used engines, machines and components, unless explicitly agreed upon otherwise. 7. The warranty given on engines, machines and components purchased from third parties, shall not exceed the warranty given to us by our supplier(s). 8. The fact that obligations under the warranty may still exist on our part, shall not entitle the contracting party to postpone any payment, no matter what such payment is intended

to cover.

9. Goods in respect of which warranty claims are lodged have to be shipped carriage paid. Components that are replaced shall become our property. 10. The warranty period in respect of goods which have been repaired or replaced under the warranty shall be three (3) months from the date of repair or replacement, or until the

expiration date of the original warranty period of those goods.

11. All stipulations set out hereinabove and to be set out hereinafter, shall apply to the activities to be carried out by us under the present warranty clause. The warranty as set forth in

this clause is the only warranty for the goods or services supplied, and replaces expressly any other warranty or claim, express or implied, whether in law or in contract.

The contracting party waives all other further-reaching rights, whether from law or from contract.

IX Conditions of Payment 1. Payment of engines, machines, components, assembly, repairs and other activities shall have to be made in cash upon delivery, completion respectively, unless otherwise agreed

upon in writing.

2. Delivery, completion respectively, as referred to in the first section of the present article, shall be understood to be:

with respect to engines and machines, the moment they are made available in our enterprise in Dordrecht and/or at the location stated in the order confirmation, or at

another storage location of our choice to be specified;

with respect to components, the moment they leave our warehouses, or are kept ready in them for shipment respectively;

with respect to assembly and repairs, the moment the work is finished in our opinion;

expenses we advance that are for the account of the contracting party, shall be settled in conformity with the stipulations of section 1 of the present article.

3. We shall reserve the right to demand interim payments and/or, in our opinion, valid securities for the delivery of engines and/or machines as well as for assembly work, repairs

and other services. The refusal on the part of the contracting party to furnish the security required, shall entitle us to dissolve the agreement by means of a written statement,

without prejudice to our rights to compensation of expenses and loss of profits as well as of all other damage.

4. All payments shall have to be made without any deduction or set-off, either at our offices in Dordrecht, or by transfer into a bank account to be specified by us, unless explicitly

otherwise agreed upon.

5. Complaints (each and every claim further to any alleged delivery deviating from the contract) concerning the execution of work or deliveries as well as invoices, shall have to be

filed in writing by registered letter under penalty of nullity of the complaint concerned, within 8 days from completion or delivery of the work or the good concerned or from the day

the invoices were sent. Complaints shall not suspend the contracting partyâ&#x20AC;&#x2122;s obligation(s) to pay.

Holland Marine Parts

D-008-03

All prices ex. VAT

6. If the contracting party is in default with the payment, it shall be deemed to be in default by operation of law and we shall have the right without any notice of default, to charge an

interest on the entire amount due still outstanding, equalling the statutory commercial interest increased by 3% on an annual basis commencing on the date the payment concerned

becomes due and payable, or, in the case of instalments, commencing on the day the term of the instalment concerned expires, and furthermore to recover all collection costs, both

the judicial and extrajudical costs, from the contracting party, all this without prejudice to the other rights vested in us. The extrajudicial collection costs shall amount to 15% of the

principal with a minimum of EURO 250.-.

7. All of the delivered goods shall remain our property until they have been paid in full. As long as payment in full has not yet been made, the contracting party shall not be entitled

without our consent in writing to that effect, to dispose of the goods in any way whatsoever. In order to be able to exercise our property rights, the contracting party shall be under

the obligation if it wishes to establish any mortgage right, right of pledge or any other restricted right to any immovable property, registered good or movable property for which the

goods to be delivered by us are intended, to first inform the creditor that the goods delivered are still our property and that a mortgage right, right of pledge or any other restricted

right first requires our consent in writing.

Retention of Title

1. Up to the moment the contracting party has paid our claim concerning the goods delivered and/or the work done in full, the goods delivered, be they processed or not, shall remain

our exclusive property for the account and the risk of the contracting party.

2. The contracting party shall not be authorised to give said goods as collateral, to let them or to transfer title to them to any third party. 3. If goods are taken back, we shall reserve the right to claim all damage, loss of profits and interest. 4. The contracting party shall be under the obligation to forthwith notify us of the fact that third parties enforce rights to goods falling under the retention of title pursuant to the

present article.

5. If it is shown at any point in time that the contracting party has failed to fulfil any of aforementioned obligations, the contracting party shall owe a penalty to the amount of 15% of

the unpaid part of the purchase price or the work done, without prejudice to the right to damages.

XI Dissolution / Cancellation 1. Each and every failure to comply with any obligation on the part of the contracting party, shall entitle us to dissolve the agreement(s) by means of a mere written statement, without

prejudice to our right to damages. At our own discretion, we shall always be able to demand compliance with the agreement(s), without prejudice to the right to damages. Failure

to comply with any obligation shall also count as a resolutory condition which we can invoke in writing at our own discretion, without prejudice to our right to claim compensation

for all damage.

2. The contracting party shall waive all rights to dissolution of the agreement, unless cancellation of the agreement in conformity with the stipulations of section 3 of the present article

is agreed upon.

3. The contracting party shall only be able to cancel the agreement if we consent to it. In that event, the contracting party shall owe us a compensation to the amount of 15% of the

contracting / purchase price (exclusive of VAT), unless the damage, which shall include the costs and the loss of profits, exceeds 15% of the contracting / purchase price (exclusive

of VAT), in which case the compensation shall cover the total amount of damage, interest and costs. In the event the agreement is cancelled, the contracting party cannot lay claim

to anything that we have already done and everything that we have already done shall have to be undone at the expense of the contracting party, all this at our discretion.

XII Purchase Conditions 1. If and in so far as we, as a buyer, are bound, the following conditions shall apply instead of the stipulations of III, IV, VI and VIII through X, maintaining the other stipulations: 2. Prices shall be fixed prices and delivery periods shall always be terms to be observed on penalty of forfeiture of rights, unless otherwise stated. 3. In the event of late delivery, the contracting party shall be immediately in default and shall always owe us a penalty to the amount of the purchase price agreed upon exclusive of

VAT, without prejudice to the right to damages to the extent the latter exceed said penalty. The penalty and the damages can be settled against any sum we may owe under any

agreement whatsoever.

4. The contracting party shall undertake to give the warranty we are held to give our customers. XIII Disputes

All disputes between us and the contracting party resulting from any agreement, preliminary agreement or any other legal relationship whatsoever, shall be exclusively referred to

the judgement of the competent court in Dordrecht, subject to the absolute competence of the subdistrict sector. The court in Dordrecht, division for interim injunction proceedings,

shall be exclusively competent for interim injunctions.

XIV Applicable Law

Dutch law exclusively, shall apply to all offers made and agreements concluded on the present General Terms and Conditions and the consequences thereof.

The application of the Vienna Sales Convention shall be excluded.

All prices ex. VAT

D-008-03

Holland Marine Parts

234,2

241,5

170

226,3

226,3 236,1

236,1

150

75,8

150

139,3

200

8,5

162,5

110

20,5 160

105,3

200

75,8

160

110

20,5

273,7

162,5

All our products are manufactured according to CE regulations. We keep the rights to change descriptions, graphs or statements, which are required for technical development of our Jet Thruster systems.

Holland Marine Parts

D-008-03

All prices ex. VAT