DOVETAIL BLOCKS FOR LONG MALCOLM REAR MOUNT (DB0500 & DB0625) Some rifles have larger dovetail cuts compared to the standard 3/8”. We have two additional dovetail block to replace the 3/8” dovetail block that comes with the Long Malcolm Model. Available are block sizes 1/2” and 5/8” (or 0.625”).
HIGHER FRONT RING (M634LHF) This ring is designed for the Long Malcolm scope only. It will replace the standard ring that comes with the scope. A 3/8” dovetail cut is required and it raises the front of the scope up 1/4”.
FINE ELEVATION ADJUSTMENT SET (FEASET) This three-piece accessory is designed to attach to the standard rear Long Malcolm mount. This allows the shooter to adjust the elevation by turning the screw up or down.
MARLIN 94/95 MOUNT (M9495MT) This two-piece mount is designed for the Short Malcolm scopes to be mounted on a Marlin 94 or 95 rifle. The mount uses the pre-existing screw holes and rear dovetail cut. Mounting screws are included.
FINE ELEVATION ADJUSTMENT SET (FEASET) This three-piece accessory is designed to attach to the standard rear Long Malcolm mount. This allows the shooter to adjust the elevation by turning the screw up or down.
SHILOH FRONT MOUNT AND REAR BLOCK (SHIDTSET) The front mount and rear block set are designed so the Long Malcolm scope can be mounted on some of today’s Shiloh and C. Sharps rifles. The front mount uses the front dovetail cut measuring approximately 0.453”, and the rear block fits the rear dovetail block measuring approximately 0.486”. Two holes may need to be drilled and tapped for the rear block. Mounting screws not included.
OFF-SET PLATE WITH 1/2” 60° BASE MOUNT (OSPWB) This mount is designed for the Short Malcolm scopes only. If more clearance is needed for the hammer, and a specialized mount is overkill, two of these mounts may be a simple fix. Measuring 1/2” tall, these mounts move the scope a 1/4” to the left. Enough for proper clearance, but not so much that the shooter is uncomfortable. These mounts are drilled for 8-40 screws (not included), sold individually, and can only be used with an octagon barrel.
| 40