Page 1


Hi-Lux Core Values In 1966, during the onset of the Vietnam War, Second Lieutenant James Leatherwood sought to create his own firearm optics with a specific vision in mind. 1. R ugged Optics that withstand demands of daily weapon operators 2. Feature rich optics 3. Affordable to the working class Nearly 50 years later, Leatherwood Hi-Lux Optics is still committed to these core values. Built tough to withstand the demanding requirements of daily operation, Hi-Lux optics are precisely manufactured, with numerous checkpoints to ensure quality assurance. You don’t have to pay a premium for quality glass anymore. Hi-Lux :: Premium Optics for all operators

1|


Contents 04

CMR Series

07

Phenom Long Range Series

11

Tactical Red Dots Sights

15

PentaLux Series

17

Uni-Dial Series

20

ART Series

23

Top Angle Series

25

LER Series

27

Buck Country

29

30mm Professional Series

31

M40 Dual Focal Plane Series

33

W. Malcolm Vintage Rifle Scopes

35

W. Malcolm 8X USMC Sniper

37

W. Malcolm M73G4

39

Malcolm Accessories and Mounts

41

Hi-Lux Max Tac Rings and Bases

|2


Whether shooting competitively or clearing rooms, Hi-Lux Tactical Optics feature flawless precision, ruggedness, and user friendly design. Designed for everyday operators.

3|


CMR Series CMR 1 Series Not only is the Hi-Lux Optics CMR the most affordable high quality scopes of this design, it also offers more features than any other CQB scope of comparable price. These 1-4x24mm scopes are offered in two distinct models – the CMR14X24, with an illuminated BDC reticle for rifles chambered for the 62 grain 5.56NATO/.223 Remington or 168 grain .308 Winchester AR cartridges, and the CMR-AK762, with an illuminated BDC reticle for 122 grain 7.62x39mm AK service round. CMR4 – Caliber Specific Ballistic Reticles (3 versions – CMR4, CMR4-AK762, CMR4-556) When engaged in tactical situations or shooting competitively, a couple of seconds can be the deciding factor between success and failure. At low magnification, the CMR4 allows the shooter to keep both eyes on target when clearing rooms or stages. Yet have the ability to shoot distances up to 600 yards or more at 4X. With its illuminated horseshoe and crystal-clear optical system, the CMR4 allows the operator to quickly acquire and engage targets. From competitive shooting, close quarter battle to big-game stalking; the CMR4 has all bases covered. CMR8 – First Focal Plane 34mm Tactical Rifle Scope The CMR8 is the flagship of Hi-Lux Optical Engineering Technology. With its 8X zoom ratio, and true 1X low magnification, the CMR8 is extremely versatile, working perfectly with CQB weapon platforms from ARs, AKs to DMRs. With a total of 12 MILS (120 clicks) of elevation and windage adjustment per turn, shooters can easily dial in DOPE for shots up to 1000 yards. ZRO-LOK turrets ensure that you never lose your rifle’s zero, allowing for just one full turn from your rifle’s zero. With these features packed in to the 10”, 22oz mil-spec aluminum body, you’ll wonder why you didn’t look for Hi-Lux in the first place.

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

nitrogen purged Nitrogen gas purged scope ensures fogproof performance throughout a wide range of temperatures.

Zero-LOK Turrets The ZRO-LOK turrets allow for one full turn of adjustment from zero.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

shockproof Shockproof Construction withstands recoil forces.

|4


Available Reticle

Available Models AVS-CMR8

20

10

10

6

8

6

4 200 m

8 10

10

20

CMR14X24

CMR4

CW-4 FFP (@ 1X)

(62 gr .223/168 gr.308)

10 1M

5

5

8

6

4

2

2

4

6

1.75M 1M

8

10

5 5

AVS-CMR8 (@ 1X)

10

1.75M

10

CMR1

6

7

8

9 10

5

6

9 10 7 8

10 9 8

7

6

5

10 9

8

7

6

5

5

10

6 8

15

8

20

10

10 9 8 7

1M

6 5 10 9 8 7

1.75M

6 5

CMR-AK762 (122 gr. 7.62X39R)

CMR4 (55 grain 5.56)

CW-4 FFP (Center @ 8X)

AVS-CMR8 (center @ 8X)

CMR4

Dimension Chart

CMR8 Item No.

5|

A

B

C

D

E

F

G

CMR14X24

10.20”

30mm

3.00”

30mm

1.28”

2.10”

1.56”

CMR-AK762

10.20”

30mm

3.00”

30mm

1.28”

2.10”

1.56”

CMR4

10.20”

30mm

3.00”

30mm

1.28”

2.10”

1.56”

CMR8

10.20”

34mm

2.75”

34mm

1.55”

1.90”

1.86”


Compact 34mm Scope

ZRO-LOK turrets

At just 10” and 22.5 oz, the CMR8F’s 34mm tube allows for more internal adjustment and greater light gathering capabilities.

With the ZRO-LOK turrets, you will not lose your initial zero. Loosen the set screws to reindex your turret to your rifle zero.

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

COATING

RETICLE

ELEV.

WIND.

MOA

MOA

CMR14X24

1X-4X

24

94.8’ - 26.2’

11.1 (@ 1X) – 6 (@ 4X)

3

10.20

16.50

Diamond Tuff14

Illuminated 62 grain 5.56X45mm BDC reticle

1/2

1/2

CMR-AK762

1X-4X

24

94.8’ - 26.2’

11.1 (@ 1X) – 6 (@ 4X)

3

10.20

16.50

Diamond Tuff14

Illuminated 122 grain 7.62x39R BDC reticle

1/2

1/2

CMR4 (all reticles)

1X-4X

24

94.8’ - 26.2’

11.1 (@ 1X) – 6 (@ 4X)

3

10.20

17.10

Diamond Tuff14

CMR4 Illuminated BDC Ranging Reticle

0.1Mil

0.1Mil

CMR8F

1X-8X

26

114.8’ - 14.5’

16.6 (@ 1X) – 3.2 (@ 8X)

4

10.20

22.5

Diamond Tuff14

AVS-PRS, CW-4 FFP

0.1Mil

0.1Mil

**Diamond Tuff14: All air glass surfaces are fully multi-coated using proprietary coatings to maximize the light transmission.

|6


7|


Phenom FFP Long Range Series The Phenom series is Hi-Lux Optics first foray into precision long range rifle scopes. Specifically designed for the committed precision shooting, tactical and law enforcement communities, the Phenom 5-30X FFP utilizes the CW-3 reticle. The CW-3 reticle enables the operator to quickly place follow up shots by tracking the first shot on the unique grid. As the Phenom 5-30X is a 1st Focal Plane scope, the CW-3 reticle can be used at all magnifications. By utilizing the Christmas tree portion of the reticle, all windage holdovers can be made on by holding over. Save your internal adjustment for dialing elevation! From designing the optical system to eliminating optical shift when changing magnification, the Hi-Lux manufacturing process requires meticulous attention to detail and precision. All glass lenses in the rifle scope are fully multi-coated with DiamondTuff14 for optimal light transmission. Combining the solid 34mm aircraft grade aluminum tube with the Phenom’s large 56mm objective lens maximizes its light gathering capabilities. Argon purging and rubber gasket seals guarantee fogproof performance in all temperatures and climates. When competing in shooting competitions, you need to maximize every advantage you have. Designed and tested by former military operators and professional shooters, the Phenom 5-30X is a rugged, yet precise instrument, dedicated to tearing up in the competitive circuit.

|8


Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

D

Fully Multi-Coated All lenses in the rifle scope are fully multicoated for maximum light transmission

G 4 3

E 8

6

B F

N 4

3

2

2

M

L

1

1

1

A K

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

G

2

3

B

6

D

2

0.1 Mil Dots

3 3

3

4

First Focal Plane

H

5 3

I

3

6

The reticle is in First Focal Plane.

Small Dots are 0.06 Mils

7 5

3

3

5

3

5

3

5

3

5

3

5

3

5

3

5

8 9

Shockproof Shockproof Construction withstands recoil forces.

5

3

10 11 5

3

12 13 5

3

14

nitrogen purged

15

The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

5

3

16 17 5

3

18

Perma Coat

19 5

The wear resistant black anodized coat protects the scope exterior from scratches

3

20

22

ED Glass Extra Low High Dispersion glass eliminates color fringing, ensuring true color fidelity throughout the visible light spectrum.

HydroLOK coating All lens surfaces are coated with HYDROLOK film to prevent oil, dirt and grease buildup.

9|

8

D

1

24

26

28

G

A (spacing size)

C

E 4

J

Reticle Subtensions A 0.1 Mils B 0.2 Mils C 0.3 Mils D 0.4 Mils E 0.5 Mils F 0.6 Mils G 0.8 Mils H 0.6 Mils I 0.2 Mils J 0.6 Mils K 0.2 Mils L 0.1 Mils M 0.1 Mils N 0.05 Mils


Specs Chart POWER MODEL NO. PM530X56

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

56

7.5’ - 1.2’

10 (@ 5X) - 1.66 (@ 30X)

3.75

14.6

36

5X-30X

TUBE DIAMETER

RETICLE

ELEV.

WIND.

mRAD

mRAD

0.1

0.1

(MM) 34

CW-3 FFP

Dimension Chart Item No.

A

B

C

D

E

F

G

H

PM530X56

14.6mm

56mm

4.63”

2.75”

1.61”

1.98”

1.86”

34mm

| 10


MM-2 The MM-2 collimator reflex red dot sight provides quick target acquisition, unlimited versatility, and an outstanding six year battery life in a compact package. Machined from solid 6061-T6 aluminum billet, the Hi-Lux MM-2 is the perfect complement for your rifle, pistol or shotgun. MM-2 Riser Mounts If you will be shooting with the MM-2 on an AR, chances are that you will need a riser block. There are three riser heights available for the MM-2: Absolute Co-Witness, Lower 1/3 Co-Witness and Low. The MM-2 red dot comes with an AR riser, in your choice of Absolute Co-Witness or Lower 1/3 Co-Witness, and the low mount for use with shotguns and pistols.

RED DOT SERIES Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior body from scratches.

11 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

6 year battery life The MM-II’s expected battery life is approximately 6.2 years (55,000 hours) at medium brightness settings.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

shockproof Shockproof Construction withstands recoil forces.

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

2 MOA Red Dot The MM-2 has a 2 MOA red dot.


Max Tac Dot Machined from solid aluminum billet, the rugged Max-Tac Dot is recoil-proof and gasket sealed for fogproof performance in any weather condition. The wide 30mm objective allows for maximum light transmission and a full field of view - with both eyes open. Red dot brightness can be automatically adjusted by the top –facing light sensor or manually adjusted via the digital illumination controls on the side. You shouldn’t have to break the bank when purchasing a quality red dot sight.

TD-4 Reflex Sight The TD-4’s compact signature belies its enormous versatility. Whether its mounted 45 degrees canted as a backup sight for Close Quarters Battle or set up on your turkey gun, the parallax-free TD-4 reflex sight promotes quick target acquisition and a wide field of view with both eyes open. The front facing light sensor automatically adjusts brightness for optimal battery efficiency. TD-IV mounting options The versatility of the TD-4 reflex red dot sight allows it to be mounted on ARs, AKs, shotguns or 45 degree offset with your primary magnified optic. Get on target quicker with the TD-4! *Offset Mounts are sold separately

RED DOT SERIES Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

nitrogen purged

Fully Multi-Coated Lenses

Nitrogen gas purged scope ensures fogproof performance throughout a wide range of temperatures.

All lenses in the rifle scope are fully multicoated for maximum light transmission.

shockproof Shockproof Construction withstands recoil forces

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

4 MOA Red Dot

4

The size of the red dot is 4MOA.

| 12


Product Images

Max Tac (MTD-30)

TD-4 (ESTD2116)

MM-2 L1/3 and MM-2 ACW

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

COATING

RETICLE

2.5

2.1

Diamond Tuff14

4MOA Dot

ELEV.

WIND.

MOA

MOA

1

1

(FT)

(MM)

(IN)

ESTD2116

1X

21x16

49’

N/A

Unlimited

MTD-30

1X

30

68’

N/A

Unlimited

5

8.9

Diamond Tuff14

4MOA Dot

1

1

MM-2

1X

20

42’

N/A

Unlimited

2.5”

3.8

Diamond Tuff14

2MOA Dot

1/2

1/2

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

13 |


MM-2 Thermal Cycling tests The Hi-Lux MM-2 passed extensive thermal cycling tests at Alexander Arms testing Facility on the semi-automatic ULFBERHT .338 Lapua Magnum rifle. The entire system, Ulfbehrt and serially mounted MM-2s, was frozen for 12 hours at -85 Fahrenheit (-65 Celsius). After shooting 200 rounds of Black Hills 300 grain HPBT ammo, both MM-2 sights held zero, with good red dot visibility and functioning adjustments. The system was then thermal cycled with fully functioning adjustment and controls to 185 Fahrenheit (85 Celsius).

| 14


PentaLux TAC-V SFP Series Built for the serious long-range tactical shooter or hunter, the PentaLux TAC-V series provides a wide magnification range in a compact package. Due to its high density, fully multi-coated lenses, the PentaLux TAC-V allows shooters to see better contrast and color fidelity in low light conditions. By framing a known size target on the MIL-MOA illuminated ranging reticle, you can determine the distance to targets in yards or meters.

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

15 |

nitrogen purged Nitrogen gas purged scope ensures fogproof performance throughout a wide range of temperatures

High Density Glass The PentaLux series offers high density low dispersion glass for true color fidelity.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission

shockproof Shockproof Construction withstands recoil forces

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

5:1 Magnification Optical System 5:1 Magnification Ratio


Available Reticle 10

8

6

4

2

20 8

6

4

2

20 2

4

6

8

2

4

6

8

PentaLux TAC-V First Focal Plane

10

15

20

Designed around the needs of tactical operators and competitive shooters, the PentaLux TAC-V FFP is loaded with dozens of innovative features, from its high density glass lenses to its precisely machined 100 click adjustment turrets. The PentaLux TAC-V FFP comes with the CW1 illuminated rveticle, for quick range calculation and holdovers. You asked for a precision riflescope that isn’t prohibitively expensive and we’ve delivered!

25

30

CW1-FFP

TAC-V SFP

Dimension Chart Item No.

A

B

C

D

E

F

G

H

TAC-V420X50 FFP

14.6”

59.0mm

4.65”

2.26”

1.58”

2.90”

1.77”

30mm

TAC-V210X42

12.0”

49.7mm

2.89”

2.35”

1.35”

2.30”

1.67”

30mm

TAC-V420X50

14.5”

59.0mm

4.65”

2.26”

1.35”

2.90”

1.67”

30mm

Specs Chart POWER MODEL NO.

OBJ. LENS

MAIN TUBE

F.O.V. @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

DIA-MM

100YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(Feet)

(MM)

(IN)

COATING

RETICLE

CLICK VALUE

TAC-V210X42

2X-10X

42

30

48.7'-9.7'

17.50 (@ 2X) - 4 (@10X)

4

12

17.6

Diamond Tuff14

TAC-V SFP

0.1 Mil

TAC-V420X50

4X-20X

50

30

25.10' - 8.37'

9.5 (@ 4X) - 2.4 (@ 20X)

4

14.5

22

Diamond Tuff14

TAC-V SFP

0.1 Mil

TAC-VF420X50

4X-20X

50

30

28.5’ - 6.0’

12.5 (@ 4X) - 2.5 (@ 20X)

3.6

14.6

30

Diamond Tuff14

CW-1 FFP

0.1 Mil

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 16


Uni-Dial Series Long distance shooting is dependent upon several factors including bullet weight, wind, temperature, atmospheric conditions, and barometric pressure. The Uni-Dial series offers adjustable ballistic turrets. With individually range markers to reference your rifle’s Data of Previous Engagement (DOPE), the Uni-Dial series allows shooters to program their elevation ballistic turret for virtually any caliber. Once you determine your range to the target, simply turn the ballistic turret to the corresponding flag for the range, aim and pull the trigger!

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

17 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

shockproof Shockproof optical system is designed to be recoil proof.

Second Focal Plane The reticle is in Second Focal Plane.

Ballistic Turret The ballistic turret can be programmed based on your rifle’s Data of Previous Engagement (DOPE). Once set, the shooter can quickly dial in to the preset ranges.

Tri-Center Spring Tension Offers more accurate adjustment tracking for windage and elevation.


Available Reticle UD2510X44MD

UD416X50MLR

Mrad Ranging (Illuminated)

MLR Reticle (Illuminated)

No-Math Mil Dot UD530X56

Dimension Chart Item No.

A

B

C

D

E

F

G

H

UD2510X44MD

13.20”

52mm

3.20”

3.14”

1.42

2”

1.62”

1”

UD416X50MD

14.00”

58mm

4.00”

1.40”

3.50”

1.69”

1.78”

30mm

UD416X50MLR

14.00”

58mm

3.5”

1.70”

2.7”

2.1”

1.78”

30mm

UD530X56

14.6”

56mm

4.25”

2.35”

1.92”

2.50”

1.78”

34m

Specs Chart POWER MODEL NO. UD2510X44MD

2.5X-10X

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

44

47.2’ - 11.9’

10.2 (@ 2.5X) - 4 (@ 10X)

3

13.2

15.3

COATING

Diamond Tuff14

RETICLE

No Math Mil-Dot

ELEV.

WIND.

MOA

MOA

1/2

1/4

UD416X50MD

4X-16X

50

24.1’ - 6.3’

10 (@ 4X) - 3 (@ 16X)

3.25

14.1

26.8

Diamond Tuff14

No Math Mil-Dot

1/2

1/4

UD416X50MLR

4X-16X

50

24.1’ - 6.3’

10 (@4X) - 3 (@ 16X)

3.25

14.1

26.8

Diamond Tuff14

Illuminated MLR Reticle

1/2

1/4

UD530X56

5X-30X

56

7.5’ – 1.3’

10.3 (@5X) – 1.72 (@30X)

4

15

29

Diamond Tuff14

Illuminated mRad Ranging

0.15Mil

0.1 Mil

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 18


UD416X50MLR (pictured ABove)

Uni-Dial Ballistic Turret The Uni-Dial Ballistic Turret (Patent US 20040144013 A1) can be programmed to indicate zeros at various ranges based on your Data of Previous Engagement (DOPE). How to set Ballistic Turret: 1) Determine your bullet trajectory information for various ranges in MOA. 2) Loosen the two set screws on top of the Elevation Turret. 3) Set the flags based on trajectory information from Step 1. 4) Tighten the set screws on the turret. ** NOTE: The Uni-Dial 5-30X56 ballistic turret is toolless and does not require an allen wrench for setup.

19 |


Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

High Density Glass High Density, low dispersion glass guarantees true color fidelity.

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

shockproof Shockproof construction withstands rifle recoil forces.

PermaCoat

Leatherwood ART System Long range shooting is dependent upon several factors, including but not limited to your bullet’s caliber, grain, temperature, Corrialis Effect, and atmospheric conditions. When in fight or flight response, most people struggle with basic mental and mechanical operations whether counting clicks based upon Data Observed from Previous Engagements (D.O.P.E.) or mentally calculating distance in yards by milling. Any delay or mental error leads to unfilled tags at the end of a hunt, or imminent death in tactical warfare. 2nd Lieutenant James Leatherwood (US Army) understood this problem – he wanted to design a system that was simple and fast in stressful conditions. In fact, he had already begun prototyping his ART (Auto Ranging Trajectory) system in the 1960’s to simplify and combine range finding with Bullet Drop Compensation.

Unused to the jungle terrain the US suffered heavy casualties to guerilla warfare tactics. Utilizing the mountain’s rocky outcroppings as cover, VietCong snipers would routinely fire down into US Army firebases. While this annoyed and angered most servicemen in the camps, Jim Leatherwood was brimming with excitement. Looking to test his early Leatherwood ARTEL prototype, he grabbed his M14 service rifle and stormed into the tropical battlefield. Hours later, Jim triumphantly returned. “That son of a gun won’t be bothering us anymore!” Utilizing this system, average shooters transformed into sharpshooters, able to quickly and accurately engage targets at unknown distances. Born out of necessity and refined in trial by fire, Leatherwood Optics continues its legacy of excellence. Rugged, feature-rich, reliable optics for hunting and shooting optics from the Past, Present, to Future!

The wear resistant black anodized coat protects the scope exterior from scratches.

Auto Ranging Trajectory System After setting the CAM, the base will correct bullet drop using external adjustment in the integrated mount.

Second Focal Plane The reticle is in Second Focal Plane.

Tri-Center Spring Tension Offers more accurate adjustment tracking for windage and elevation.

One piece Aluminum Tube Single piece rifle scope construction allows for optimal waterproofing and tensile strength design.

External Windage Adjustment The integral ART base also allows for external windage adjustment.

| 20


M1000 The Leatherwood ART M1000 is the go to riflescope for novice shooters or avid hunters. Developed during the Vietnam War era, the M1000 enables shooters to place hits in the “kill zone” up to 1000meters without having to range the target. Simply frame a ½ meter/19” target within the center brackets of the No-Math Mil-Dot reticle, Aim and Shoot!

Specs Chart POWER MODEL NO. ART2510X44

2.5X-10X

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

47.2’ - 11.9’

10.2 (@ 2.5X) - 4 (@ 10X)

3

13.2

25.2

44

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

21 |

COATING

Diamond Tuff14

RETICLE

No Math Mil-Dot

ELEV.

WIND.

MOA

MOA

1/4

1/4


M1200-XLR The Leatherwood ART M1200-XLR is the latest iteration of the high power ART scopes. With a reinforced integrated mount and rugged construction, the ART M1200 – XLR is virtually recoil proof and can compensate for bullet drop from 300-1200 meters. Using the XLR Illuminated ranging reticle, shooters can range known size targets in their choice of yards or meters.

Specs Chart POWER MODEL NO. M1200ART-XLR

6X-24X

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

12’ - 4’

8.5 (@ 6X) - 2 (@ 24X)

3.25

15.5

29

50

COATING

Diamond Tuff14

RETICLE

Illuminated XLR Reticle

ELEV.

WIND.

MOA

MOA

1/4

1/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 22


Top Angle Series The needs of left handed shooters are neglected in today’s optical market. Adjusting parallax forces most left hand shooters out of the shooting position, typically to turn the side parallax turret with their off hand. This momentary lapse of attention down range or field could be the difference between unused tags or a full winter meat supply. The Leatherwood Hi-Lux Top Angle series features an ergonomically placed parallax turret (US Patent # US 7626760). Regardless of left or right hand preference, shooters can ambidextrously adjust parallax without removing trigger fingers or sight down range. Get on target quicker with the Top Angle.

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

23 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

shockproof Shockproof optical system is designed to be recoil proof.

Second Focal Plane The reticle is in Second Focal Plane.

Patented Top Angle Parallax AdjustmenT

Ergonomically positioned parallax knob can be ambidextrously adjusted from the operator’s shooting position

Tri-Center Spring Tension Offers more accurate adjustment tracking for windage and elevation.


Available Reticle

Available Models TP312X50MD

TP416X50MD MOA Ranging (illuminated)

MLR Reticle (Illuminated)

No-Math Mil Dot TP416X50MLR

Dimension Chart Item No.

A

B

C

D

E

F

G

H

TP312X50MD

13.25”

58mm

3.16”

1.16”

3.5”

1.73”

1.78”

30mm

TP416X50MD

14.00”

58mm

4.00”

1.40”

3.50”

1.69”

1.78”

30mm

TP416X50MLR

14.00”

58mm

3.50”

1.70”

2.7”

2.1”

1.78”

30mm

TP730X50MOA

17.20”

58mm

6.20”

2.0”

2.7”

2.1”

1.78”

30mm

TP730X50MOA

Specs Chart POWER MODEL NO. TP312X50MD

3X-12X

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

COATING

(FT)

(MM)

(IN)

50

40.3’ - 10.2’

10 (@ 3X) - 3.3 (@ 12X)

3

13.6

25.6

Diamond Tuff14

RETICLE

No Math Mil-Dot

ELEV.

WIND.

MOA

MOA

1/4

1/4

TP416X50MD

4X-16X

50

24.1’ - 6.3’

10 (@ 4X) - 3 (@ 16X)

3.25

14.1

26.8

Diamond Tuff14

No Math Mil-Dot

1/4

1/4

TP416X50MLR

4X-16X

50

24.1’ - 6.3’

10 (@ 4X) - 3 (@ 16X)

3.25

14.1

26.8

Diamond Tuff14

Illuminated MLR reticle

1/4

1/4

TP730X50MOA

7X-30X

50

10.6’ - 3.5’

6.9 (@ 7X) - 2.3 (@ 30X)

3.30

17.2

29.7

Diamond Tuff14

Illuminated MOA Ranging

1/8

1/8

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 24


Long Eye Relief Series While made popular through the 1980s by gun writer Jeff Cooper, Scout Rifles have been around for decades – in a variety of short and fast handling bolt-action, semi-auto and even lever-action models. As the scope is mounted in front of the action, scout rifles can be quickly reloaded and offer increased mobility due to its lightweight design. Unlock the untapped potential of your scout rifle with the Long Eye Relief Scout scope.

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat Matte Black anodized coat protects the scope body from scuffs and wear.

25 |

nitrogen purged Nitrogen gas purged scope ensures fogproof performance throughout a wide range of temperatures

shockproof Shockproof Construction withstands recoil forces

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

HydroLOK coating All lens surfaces are coated with HYDROLOK to prevent oil, dirt and grease buildup.

Second Focal Plane The reticle is in the second focal plane.


“[This] general purpose rifle will do equally well for all but specialized hunting, as well as for fighting; thus it must be powerful enough to kill any living target of reasonable size.” – Jeff Cooper on the design considerations of the Scout Rifle - Art of the Rifle page 18.

Dimension Chart

Duplex Reticle

.308 BDC Reticle Item No.

A

B

C

D

E

F

G

H

LER27X32

10.90”

32mm

2.75”

2.10”

1.12”

1.39”

1.38”

1”

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

COATING

RETICLE

ELEV.

WIND.

MOA

MOA

LER27X32

2-7

32

18.8’ - 6.3’

17.7 (@ 2X) - 5.9 (@ 7X)

13.2-8.7

10.9

12.3

Diamond Tuff14

Duplex

1/4

1/4

LER27X32BDC

2-7

32

18.8’ - 6.3’

17.7 (@ 2X) - 5.9 (@ 7X)

13.2-8.7

10.9

12.3

Diamond Tuff14

308 BDC Reticle

1/4

1/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 26


Buck Country Series The scopes in the ATR Buck Country Series are destined to become classics among serious deer hunters. Here’s a scope that can take the rough handling of climbing in and out of a deer stand, or bouncing around rough country in a 4×4 pickup. After comparing the quality of the optics with scopes costing twice as much, you’ll quickly realize the value built into a Buck Country model. Available reticle options include a fine duplex crosshair, German 3 Post with illuminated center dot and .50 cal Muzzleloader BDC.

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

27 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

shockproof Shockproof construction withstands recoil forces.

Second Focal Plane The reticle is in Second Focal Plane.

Tri-Center Spring Tension Offers more accurate adjustment tracking for windage and elevation.


Available Reticle

Available Models BC39X40 BC39X40IR BC156X42

Duplex

GERMAN 3 POST WIthIlluminated cEnter Dot

Toby Bridges 50 cal Muzzleloader BDC

TB-ML39X40

Dimension Chart Item No.

A

B

C

D

E

F

G

H

BC156X42

11.30”

50mm

2.83”

1.27”

1.28”

2.10”

1.62”

1”

BC39X40

12.25

48mm

3.25”

2.20”

1.35”

2”

1.56”

1”

BC39X40IR

12.25

48mm

3.25”

2.20”

1.35”

2”

1.56”

1”

TB-ML39X40

12.25

48mm

3.25”

2.20”

1.35”

2”

1.56”

1”

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

COATING

RETICLE

ELEV.

WIND.

MOA

MOA

BC156X42

1.5X-6X

42

63.1’ - 15.7’

8 (@ 1.5X) - 6 (@ 6X)

3

11.8

14.5

Diamond Tuff14

Duplex

1/4

1/4

BC39X40

3X-9X

40

37.7’ - 12.6’

13.3 (@ 3X) - 4.4 (@ 9X)

3.25

12.5

16.2

Diamond Tuff14

Duplex

1/4

1/4

BC39X40IR

3X-9X

40

37.7’ - 12.6’

13.3 (@ 3X) - 4.4 (@ 9X)

3.25

12.5

16.8

Diamond Tuff14

3 Post with center dot

1/4

1/4

TB-ML39X40

3X-9X

40

39’ - 13’

13.3 (@ 3X) - 4.4 (@ 9X)

3.25

12.5

15.8

Diamond Tuff 14

TB-ML BDC Reticle

1/4

1/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 28


PR Professional 30mm Series This riflescope is for those who prefer simplicity over unnecessary complication. There are no electronics or batteries adding extra weight to your rifle, just clear glass, a solid 30mm aluminum tube, and either a duplex or Mil-Dot reticle. Like a leopard stalking its prey, you’ll need to nimbly track your game, waiting for that golden opportunity. Don’t let a faulty battery ruin your hunt, shoot like a pro!

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

29 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

shockproof Shockproof Construction withstands recoil forces.

Turret Covers Covers over the windage and elevation turrets provide another level of protection for ensuring positioning of erector unit stays uniform.

Second Focal Plane The reticle is in Second Focal Plane.

Tri-Center Spring Tension Offers more accurate adjustment tracking for windage and elevation.


Available Reticle

Available Models

PR156X42

Duplex

PR2510X44

No-Math Mil Dot

MD39X40MD

Dimension Chart Item No.

A

B

C

D

E

F

G

H

PR156X42

11.30”

50mm

2.83”

1.27”

1.28”

2.10”

1.62”

30mm

PR2510X44MD

13.20”

52mm

3.20”

3.14”

1.42

2”

1.62”

30mm

MD39X40MD

12.25

48mm

3.25”

2.20”

1.35”

2”

1.56”

30mm

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

COATING

(FT)

(MM)

(IN)

42

63.1’ - 15.7’

8 (@ 1.5X) - 6 (@ 6X)

3

11.8

17.7

Diamond Tuff14

RETICLE

ELEV.

WIND.

MOA

MOA

Duplex

1/4

1/4

PR156X42

1.5X-6X

PR2510X44MD

2.5X-10X

44

47.2’ - 11.9’

10.2 (@ 2.5X) - 4 (@10X)

3

13.2

18.1

Diamond Tuff14

No-Math Mil-Dot

1/4

1/4

MD39X40MD

3X-9X

40

37.7’ - 12.6’

13.3 (@ 3X) - 4.4 (@ 9X)

3.25

12.5

18.7

Diamond Tuff14

No-Math Mil-Dot

1/2

1/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 30


M40 DUAL FOCAL PLANE Series In 1965, the U.S. Marine Corps began its search for a new rifle and scope combo to serve as their official combat sniper rifle. The goal was to have USMC armorers customize readily available production rifles for better accuracy. The Corps settled on the Remington Model 40x, a premium grade of the Model 700, chambered for the .308 Winchester (a.k.a. 7.62 NATO) cartridge, and topped it with a commercially available 3-9x40mm variable power hunting scope that featured a simple and easy to learn ranging system. The rifle was designated the M40.

Features Waterproof O-ring seals prevent dust, debris or moisture from penetrating the scope.

PermaCoat The wear resistant black anodized coat protects the scope exterior from scratches.

31 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

shockproof Shockproof Construction withstands recoil forces.

Dual Focal Plane Accu-Ranging System The Ranging scale is in the 1st Focal Plane, while the crosshairs are in the Second Focal Plane.


Available Reticle

Available Models M40 Tactical Hunter 3-9X40

M40TACH39x40 Black

Take the guesswork out of long range shots! The M40 Tactical Hunter incorporates the dual focal plane Accu Ranging system reminiscent of Vietnam War era riflescopes. In addition this scope has a BDC reticle for 223 and 308 in the second focal plane for quick holdovers at 9X.

M40USMC39x40 Green M40USMC39X40 Reminscent of the Vietnam War era green scopes, the M40USMC 39X40 has a green anodized coat and Accu-Ranging Reticle. By combining the second focal plane reticle with the range indicator in the first focal plane, the M40 USMC 3-9X40 returns the approximate range to a 18” target in the lower right quadrant.

Dimension Chart Item No. M40

A

B

C

D

E

F

G

H

12.25

46mm

3.83”

1.53”

1.24”

2.8”

1.48”

1”

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

COATING

RETICLE

ELEV.

WIND.

MOA

MOA

(FT)

(MM)

(IN)

M40USMC39X40

3X–9X

40

37.7’ - 12.6’

13.3 (@ 3X) - 4.4 (@ 9X)

3.25

12.5

16.2

Diamond Tuff14

DFP Ranging Reticle

1/4

1/4

M40TACH39X40

3X–9X

40

37.7’ - 12.6’

13.3 (@ 3X) - 4.4 (@ 9X)

3.25

12.5

16.2

Diamond Tuff14

DFP Ranging BDC Reticle

1/4

1/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 32


Features Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

William Malcolm Vintage Telescopic Riflescopes William Malcolm, one of the first names in American rifle optics, introduced his ½ and ž inch tube riflescopes in 1855. His innovation and vision is embodied in our Wm. Malcolm Vintage Telescopic Riflescope series. Classic 19th and 20th century rifles deserve a scope with period-correct styling. Combining the looks, mounting solutions and adjustments of the originals with modern manufacturing processes such as multi-coating and precision CNC machining, the Wm Malcolm vintage scopes are a perfect match.

33 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

shockproof Shockproof construction withstands rifle recoil forces.

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.


M334151

M634181

M634321

Fine Cross

Specs Chart POWER MODEL NO.

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

COATING

RETICLE

TUBE DIAMETER (IN)

M634121

6

16

10’

5.8

4

30.5

32.5

Diamond Tuff14

Fine Crs

3/4

M334151

3

16

15’

5.8

4.5

17

17.5

Diamond Tuff14

Fine Crs

3/4

M634181

6

16

12’

5.8

4.5

18

18

Diamond Tuff14

Fine Crs

3/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 34


William Malcolm 8X USMC Sniper The 8X USMC Sniper scope is a piece of history. Carlos Hathcock, one of the most recognizable names in military sniping history, was credited with 93 confirmed kills using a Model 70 Winchester 30-06 with a Unertl 8X. Not only will this scope match the originals in precise click adjustment of windage and elevation, the William Malcolm 8X USMC offers the advantages of modern lens coating, with fully multi-coated lens surfaces for maximum light transmission.

Features Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

External Windage and Elevation Adjustment External Windage and Elevation adjustment are located on the rear mount

35 |

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

Recoil Spring Reduces amount shock from recoil onto the scope.

shockproof Shockproof Construction withstands recoil forces.

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.


Recoil Spring The William Malcolm 8X USMC Sniper scope’s recoil spring eliminates the need for the shooter to pull the scope back after each shot. The recoil spring is NOT allowed to be used for CMP vintage sniper competitions.

Fine Cross

Specs Chart POWER MODEL NO. M8USMC

8

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

11’

4.2

3.25

23

25.4

31

COATING

Diamond Tuff14

RETICLE

Fine Crs

ELEV.

WIND.

MOA

MOA

1/4

1/4

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 36


M73G4 Series To fulfill the need for WWII sniper rifles, in 1942 the U.S. Army adopted the M1903A4 as the first standardized U.S. sniper rifle. This version of the Remington M1903A3 came without a rear sight, and had been fitted with a 3/4-inch diameter Weaver 330C 2.5x riflescope, designated the M73B1, mounted with a one-piece base and rings produced by Redfield. Our goal was to bring to the CMP Vintage Sniper Match competitor a top quality scope that matches or surpasses the performance of the WWII original scopes on the M1903A4 sniper rifles. By designing a superior optical system and internal mechanisms, the Hi-Lux M73G4 combines cutting edge, bright optics with the Weaver 330C’s classic design.

Features Fully Multi-Coated Lenses All lenses in the rifle scope are fully multi-coated for maximum light transmission.

nitrogen purged The scope is nitrogen gas purged to ensure fogproof performance throughout a wide range of temperatures.

37 |

shockproof Shockproof Construction withstands recoil forces.

Built in Adjustment Each click offers ½ MOA adjustment for elevation and windage. There is a total of 60 MOA adjustment for both windage and elevation

Diamond Tuff Guarantee Your scope is guaranteed against manufacturing and material defects for the lifetime of the scope.

¾ Inch Main Tube Steel main tube is ¾” in outside diameter


Fine Cross

Specs Chart POWER MODEL NO. M73G4

2.5

OBJ. LENS

FOV @

EXIT PUPIL RANGE

EYE

LENGTH

WEIGHT

DIA-MM

100 YDS

IN VARIABLE MM

RELIEF

(INCH)

(O.Z.)

(FT)

(MM)

(IN)

24.09

4

3.54

11.8

8.3

16

COATING

Diamond Tuff14

RETICLE

Fine Crs

ELEV.

WIND.

MOA

MOA

N/A

N/A

**Diamond Tuff14: All air glass surfaces are fully multi-coated using the special technology to maximize the light transmission.

| 38


Wm. Malcolm Scope Mounts & Accessories Hi-Lux Optics offers the following mounts and accessories for installing these vintage scopes on specific vintage rifles. With some modification and gunsmithing, these mounts can also be adapted to many other early rifles.

SHARPS SIDE MOUNT SET (SHSMT) Two-piece mount for short Malcolm scopes. Sharps receiver rear mount shown attached with pre-existing screw holes (mounting screws are included). front mount replaces rear sight. Front mount secured using 3/8” dovetail cut.

WINCHESTER 92/94 MOUNT SET (W9294MT) Off-set two-piece mount for short Malcolm scopes on Winchester Model 92 or 94 rifles. Use pre-existing holes on the side of the receiver. If there are none, you must drill and tap. This mount will offset the scope about 1/2” to the left for hammer clearance and for the top cartridge case ejection. Rear mounting screws, size 6-48, are included.

WINCHESTER 1885 MOUNT SET (W1885MT) Two-Piece mount for short Malcolm scopes on Winchester/ Browning Model 1885 single-shot rifle. The front 3/8” dovetail and pre-existing screw holes on the receiver are used to mount the scope. Mounting screws, size 6-48 for the front mount and 8-40 for the rear mount, are included. This mount will not work with the 1885 Low Wall.

ROUND BARREL OFF-SET MOUNTS (ROBSMT ) Two-piece off-set mounts for long Malcolm on round-barrel percussion Sharps rifle, Volunteer/Whitworth rifles. Barrel diameter must be approximately .85”. The mount moves the scope 1/4” to the left to clear the hammer. The 3/8” dovetail block that comes standard with the long scope will be needed with this mount set. 8-40 mounting screws are not included with this mount.

39 |

WINCHESTER 73/76 MOUNT SET (W7376MT) Off-set two-piece mount for short Malcolm scopes on Winchester Model 73 or 76 rifles. Uses pre-existing screw holes to mount, no need to drill and tap. Mounts the scope about 1/2” to the left. This allows for top cartridge case ejection.

HENRY .22 RIFLE MOUNT (HGB22MT) One-piece no-gunsmithing mount for short Malcolm scopes. No holes to drill and tap. Relies on rear sight 3/8” dovetail.

H &R BUFFALO CLASSIC BASE (HRBCRB) This is a no-gunsmithing base for the Long Malcolm model. This base will take the place of the Sharps Heavy Duty Base that comes standard with the scope, and is designed for the H&R Buffalo Classic round barrel.

1/2” 60° BASES (M050UB-D, M050UB-FD, & M050UB-B) When either of the Short Malcolm scopes are purchased, the M050UB-D is included. This base is drilled for recommended sizes 6-48 screws (not included) and can be used with either a round or octagon barrel. If a base that sits flush on the barrel is desired for an octagon barrel, the M050UB-FD can be purchased separately. This base is also drilled for 6-48 screws (not included). If pre-existing holes in the rifle do match the holes drilled in the base, the M050UB-B is required. This base is blank and allows holes to be drilled to match those already drilled in the barrel.


DOVETAIL BLOCKS FOR LONG MALCOLM REAR MOUNT (DB0500 & DB0625) Some rifles have larger dovetail cuts compared to the standard 3/8”. We have two additional dovetail block to replace the 3/8” dovetail block that comes with the Long Malcolm Model. Available are block sizes 1/2” and 5/8” (or 0.625”).

HIGHER FRONT RING (M634LHF) This ring is designed for the Long Malcolm scope only. It will replace the standard ring that comes with the scope. A 3/8” dovetail cut is required and it raises the front of the scope up 1/4”.

FINE ELEVATION ADJUSTMENT SET (FEASET) This three-piece accessory is designed to attach to the standard rear Long Malcolm mount. This allows the shooter to adjust the elevation by turning the screw up or down.

MARLIN 94/95 MOUNT (M9495MT) This two-piece mount is designed for the Short Malcolm scopes to be mounted on a Marlin 94 or 95 rifle. The mount uses the pre-existing screw holes and rear dovetail cut. Mounting screws are included.

FINE ELEVATION ADJUSTMENT SET (FEASET) This three-piece accessory is designed to attach to the standard rear Long Malcolm mount. This allows the shooter to adjust the elevation by turning the screw up or down.

SHILOH FRONT MOUNT AND REAR BLOCK (SHIDTSET) The front mount and rear block set are designed so the Long Malcolm scope can be mounted on some of today’s Shiloh and C. Sharps rifles. The front mount uses the front dovetail cut measuring approximately 0.453”, and the rear block fits the rear dovetail block measuring approximately 0.486”. Two holes may need to be drilled and tapped for the rear block. Mounting screws not included.

OFF-SET PLATE WITH 1/2” 60° BASE MOUNT (OSPWB) This mount is designed for the Short Malcolm scopes only. If more clearance is needed for the hammer, and a specialized mount is overkill, two of these mounts may be a simple fix. Measuring 1/2” tall, these mounts move the scope a 1/4” to the left. Enough for proper clearance, but not so much that the shooter is uncomfortable. These mounts are drilled for 8-40 screws (not included), sold individually, and can only be used with an octagon barrel.

| 40


Max-Tac... All Steel Rings & Bases If you demand the absolute strongest mounting of your scope to your rifle...nothing beats a steel to steel to steel installation! The Max-Tac rings and bases are precision machined from solid steel bar stock with exacting tolerances. Once mounted, they stay mounted insuring the sighting of your scope maintains that setting until you change the windage or elevation. Max-Tac rings offer the versatility to mount either a 30mm or 1-inch diameter scope tube, thanks to the set of steel inserts that come standard with each set of rings. These rings are offered in choice of Medium...Medium High...or Ultra High heights. - and have been designed to fit a Picatinny (Military Standard 1913) rail or Weavertype base. The Max-Tac steel bases are machined to original Weaver dimensions, and will accept either Picatinny or Weaver rings.

Max-Tac Steel Bases Available For These Rifles: *Remington Model 700—Long & Short Actions *Winchester Model 70 Short Action - New & Old Models *Savage Model 10 & 110 –Long & Short Actions

41 |

21


Diamond Tuff Guarantee When you purchase a Hi-Lux riflescope, you can expect a rugged optic that meets the rigorous demands of tactical operators. In the real world, things sometimes break. Don’t worry though, we stand behind our products. Your Leatherwood Hi-Lux optic is guaranteed against material defects, and poor workmanship for the life of the product. All electronic parts including lasers and LEDs are covered for five years from the original purchase date. ** Warranty is void if the product has been abused, misused, stolen or disassembled by third parties **

| 42


www.facebook.com/LeatherwoodHiLuxOptics www.twitter.com/HiLuxOptics @leatherwoodoptics www.hi-luxoptics.com +1 (888) 445-8912 © 2017 Hi-Lux, Inc.

Hi-Lux, Inc. 3135 Kashiwa Street Torrance, CA 90505 United States of America

2017 Leatherwood Hi-Lux Catalog  

Leatherwood Hi-Lux 2017 Catalog with new FFP rifle scopes

Read more
Read more
Similar to
Popular now
Just for you