Safe load indicator (option

Authorized workshop

Customer

Every 1500 s/h

Maintenance plan/service hours (s/h) Every 1000s/h once a year

Every 500 s/h

Every 250 s/h

Service 50 s/h

Maintenance work (once a day)

3.3 Maintenance plan (overview)

Work description

t, please refer to the operation and maintenance manual For service and maintenance work on the attachmen of the attachment manufacturer as well. Check valve clearance. Adjust if necessary

9 Clean and adjust the fuel injection pump jection nozzles, clean the injection needles/nozzles Check and adjust the injection pressure of the in Check and adjust injection time 10 Empty diesel fuel tank Check battery electrolyte. Add distilled water if necessary connections, bearing play and function Check alternator, starter and electric Check preheating system and electric connections Check correct function of air filter contamination gauge Pressure check of primar y pressure limiting valves 11 Check the tracks for cracks and cuts Check track tension. Retighten if necessary Check bearing play of tread rollers, track carrier rollers, front idlers Check piston rods for damage Check screws for tightness 12 Check the pin lock Check the line fixtures Check the indicator lights for correct function e holders for damage and correct function Check cab tilt lock, cables and cabl hydraulic system dust caps Couplings, dirt pile-up on Check the insulating mats in the engine compartment for damage/condition l lubrication system (option) Ensure grease supply of centra for completeness and condition Check labels and Operator’s Manual Check function of engine cover gas strut Check hydraulic quickhitch for damage