Operator comfort

5

4 6 3 2

1

M300041 A

Operator seat

The operator seat meets the criteria of EN ISO 7096:2000. This means that the seat is specially designed to minimize the wholebody vibrations the driver is subjected to during operation in the best possible way. The magnitude of the vibrations depends on different factors, many of which are not related to the construction of the machine, such as ground conditions, speed and operating techniques. The following should be noted:

Q Q Adapt the seat to the weight and height of the operator. Maintain the ground in the working range of the machine in good condition

Q

Match the travel speed to the prevailing conditions. A correctly adjusted operator seat enhances operator comfort and safety. An incorrectly adjusted seat may lead physical defects. The following adjustments should be made:

1 Backrest adjustment 2 Height and rear inclination adjustment 3 Height and inclination adjustment, front 4 Horizontal adjustment 5 Hand wheel for weight adjustment 40...130 kg (88... 286 lbs) 6 Armrest adjustment

WARNING!

Do not adjust the operator’s seat while the machine is moving.

Seat belt

WARNING!

The seat belt must be replaced immediately if it is damaged or has been strained in an accident.

Option

Starting of the engine is only possible if the safety belt is correctly put on (see instruction sign).

M300045A

1

5 2

6 3

7 4

8

Operator's seat heating (optional equipment)

The optionally available integrated seat heating in the standard seat thermostatically regulates the temperature of seat area and backrest between 20 °C and 38 °C (68 °F and 102 °F).

– Press the F2 key twice to switch on the seat heating. The function LED will light. – Press the F2 key again to switch off the seat heating.

9 0

M300114A

2 6451 1 Horizontal adjustment 2 Seat height adjustment 3 Backrest adjustment 4 Driver’s weight adjustment 5 Lumbar support 6 Heating 3

M300115A

Air suspended operator's seat with seat heating (optional equipment)

The operator's seat with air suspension meets with the highest requirements concerning the suspension of operator's seats. The optionally available integrated seat heating can be activated separately and thermostatically regulates the temperature of seat area and backrest between 20 °C and 38 °C (68 °F and 102 °F). The following adjustments should be made: 1 Horizontal adjustment

Pull the lever and position the seat. Let the lever click into position again. 2 Adjustment of seat height and inclination

Pull the lever and adjust the seat in height and inclination. 3 Backrest adjustment

Pull the lever and move the backrest to the required position. 4 Adjustment of driver's weight

Press the button to adjust the oscillation system to the central position in accordance with the driver's weight (no height adjustment). 5 Lumbar support

Press the push button to inflate or deflate the bottom and top air chambers. This enables an optimal adaptation of the backrest to the body. 6 Heating

Switch the heating on (indicator lamp lights) or off by means of the switch.

WARNING!

Do not adjust the operator’s seat while the machine is moving.

C B A

M400732B

M300031 A

Climate control system

A Blower switch 3-steps B Regulator for fresh air / circulation air C Temperature control

Heating operation

– Turn the temperature regulator (C) to the desired position (red sector). – Set the blower switch (A) to one of the three possible steps. – Set the regulator (B) to position "circulation". The best warming effect in the cabin is achieved with the highest blower step. Turn the temperature regulator to highest position (red sector) and circulation.

Fan operation

– Turn the temperature regulator (C) to the desired position (blue sector). – Set the blower switch (A) to one of the three possible steps. – Set the regulator (B) to position "fresh air".

If the "fresh air" position has been selected and the temperature regulator is in the highest position (blue zone), fresh air will flow into the driver's cab through a dust filter.

NOTE! The filter maintenance intervals depend on the amount of dust in the air and can therefore not be determined precisely. The filter mat can be washed out if soiled.

– Remove the side covering from the left hand side (see illustration). – Lever (arrow) up. – Pull the filter out and wash it out or replace it.

M300032A