OPTIONAL ATTACHMENTS

d WARNING: Be sure to complete installation work only after checking that coupler pins (6) (both right and left) have been installed.

d WARNING: Apply the parking brake before leaving the machine.

IMPORTANT: Apply grease onto coupler pin (6) to prevent seizing and rust before installing the attachment.

1. After checking that coupler pins (6) have been removed. Slowly approach the machine to the bucket (attachment) hooks until the hooks are inserted into the quick coupler.

IMPORTANT: Take care not to pinch hydraulic hoses between the quick coupler and the attachment.

2. Slightly raise lift arm (7) to slowly allow the bucket (attachment) to tilt backward until stopper (8) on the bucket comes in contact with quick coupler stopper (8).

3. Move auxiliary control lever (9) reverse (Install) to install coupler cylinder pins (6) (left and right).

fNOTE: Disconnect hydraulic hoses from the coupler cylinder of the quick coupler, connect them to the attachment cylinder.