DRIVING MACHINE

d WARNING: To prevent the occurrence of accidents due to running away of the machine, be sure to apply the parking brake when parking the machine and before leaving the machine. Never apply the parking brake by operating parking brake switch (1) while traveling the machine except in an emergency. Premature wear and/or damage to the parking brake may result. If the parking brake was applied while traveling the machine because of an emergency, have the parking brake inspected by your nearest TCM dealer.

• Press the OFF side of parking brake switch (1) to release the parking brake. Check that parking brake indicator (5) and service indicator (4) go OFF by pressing the switch twice with clicks.

Press the ON side of parking brake switch (1) to apply the parking brake.

Operate the parking brake after parking the machine on level ground.

fNOTE: While running the engine, when the parking brake is applied with F-N-R lever (2) in neutral, parking brake indicator (5) and service indicator (4) come ON.

• While running the engine, when the parking brake is applied with F-N-R lever (2) in either the forward (F) or reverse (R) position, parking brake indicator (5) and service indicator (4) come ON, and the alarm buzzer sounds. The monitor display indicates (3) “N” not “F” and “R”. The monitor display will not indicate “F” and “R” until the parking brake is released.

• In order to ensure safe operation, the parking brake is automatically applied when the engine is stopped even though parking brake switch (1) is OFF. In this case even after the engine is restated, the parking brake will not be released. After starting the engine, push OFF position of parking brake switch (1) to release the parking brake.

Drive Speed Change

Travel speed of this machine is automatically shifted. Auto shift 2-Speed mode or 1-Speed mode is selected by using Hi-Lo selector switch (1).

Lo :1-Speed mode. To be used for excavation and loading work

Hi :Auto shift 2-Speed mode. To be used for traveling the machine.

IMPORTANT: While traveling at high speed, avoid quick deceleration by operating Hi-Lo selector switch (1). Change the travel speed only after the machine decelerates by releasing the accelerator pedal.

Changing Forward/Reverse Drive Direction

d WARNING: Before changing the drive direction, confirm that the drive direction is clear. To ensure operator’s safety and ensure the longevity of the power train system, change the machine drive direction only after sufficiently reducing the drive speed.

1. Pull neutral lever lock (3) to the UNLOCK position.

2. Press the OFF position of parking brake switch (4).

3. Move F-N-R lever (2) to the desired position.

F: Forward Driving

N: Neutral

R: Reverse Driving