OPERATOR’S STATION

Steering

IMPORTANT: When the steering wheel is fully turned, the front and the rear frames come in contact with the stoppers so that the steering wheel does not rotate further. If the steering wheel is forcibly turned moreover, the engine may stall or malfunction of the steering system may result.

Horn Switch

Press horn switch (2) to sound the horn.

Turn Signal Lever

Indicates the drive change direction to persons and/or other vehicles by operating turn signal lever (3). Return turn signal lever (3) to neutral manually.

L : Left Turn

R : Right Turn

Dimmer Switch

The dimmer switch shifts the headlight beam high and low.

d CAUTION: Travel the machine with the headlight in the low beam position when other vehicles are present in the vicinity.

After turning the headlight ON, when turn signal lever (3) is lowered, the headlight beam is set in the high position and high beam indicator (4) comes ON. When the turn signal lever is raised, the headlight beam is set in the low position and high beam indicator comes OFF.

Light Switch

OPERATOR’S STATION

Light switch (1) has three positions, OFF, Small, and Main. As shown below, each light comes ON ( ) or OFF ( ) according to the selected position of the light switch.

2- Headlight

3- Turn Signal/Hazard Light/Clearance Light

4- Turn Signal/Hazard Light

5- Brake Light/Tail Light

Light Switch Position Headlight Clearance Light Tail Light Monitor Panel Light fNOTE: Even though the key switch is turned OFF, as long as the light switch is in (●) position, all lights except the headlight stay ON. This function is used as a parking light on a public road.

IMPORTANT: Take care not to use the below switch function for a long time. The batteries are discharged.