1 minute read
OPERATOR’S STATION
Engine Coolant Temperature Gauge
The engine coolant temperature is indicated with a needle. When the needle stays in the blue range (1) during operation, the coolant temperature is normal. If the engine coolant temperature becomes abnormally high, the stop indicator will flash. Stop machine operation and run the engine at low idle to lower the coolant temperature. After the coolant temperature lowers, stop the engine for inspection. In case the needle does not swing at all, Error in the electrical system is suspected. Contact your nearest TCM dealer for machine inspection.
Fuel Gauge
The remaining fuel amount is indicated by the needle. Fuel the machine before the needle indicates the red range (E).
Preheat Indicator (Yellow)
OPERATOR’S STATION
The preheat indicator lights when the key switch is turned to HEAT position, and it goes OFF when the engine preheating is completed.
Turn Signal Indicator (Green)
When the turn signal lever is operated, the turn signal and the indicator start flashing.
High Beam Indicator (Blue)
When the head lights are used at the high beam position, the indicator will light.
Work Light Indicator (Yellow)
When the work lights are turned ON, this indicator will come ON.
Clearance Light Indicator (Green)
When the clearance lights are turned ON, this indicator will come ON.
