Model 5200 High-Level Orderpicker

267JPW2-8T3 Communication lines used by the Guidance Manager to tell the tractor Antenna Card what frequency it should be looking for.

Section 8.Theory of Operation

Pinout Matrix

No useful voltages are measurable

Filter CardAntenna Card

268JPW2-14AGRD B– to the tractor Antenna Card. <0.5VDC wrt TP4 (B–) Filter CardAntenna Card

269JPW2-1512V Positive supply from the Wire Guidance Manager power supply for the Antenna Card.

270JPW2-13SHIELDShield that helps reduces noise interference in the AC voltage from the Antenna Card. It must be connected to B–at the Filter Card connection only.

271JPW1-1RIGHTThis is the input from the load antenna right wire sensor to the Filter Card.

Key switch closed = +10.8 to 13VDC

Filter CardAntenna Card

<0.5VDC wrt TP4 (B–) Filter CardAntenna Card

Centered over the wire you should see around 32mVAC. 1.5in. to the right you should see around 15mVAC. 1.5 in. left you should see around 75mVAC

Antenna Card Filter Card

272JPW1-2NEAR WIREThis is the input from the load antenna near wire sensor coil to the Filter Card.

Centered over the wire you should see around 70mVAC. 1.5V to either side you should see around 100mVAC

Antenna Card Filter Card

273JPW1-3LEFT This is the input from the load antenna left wire sensor to the Filter Card.

Centered over the wire you should see around 32mVAC. 1.5 in. to the right you should see around 75mVAC. 1.5 in. left you should see around 15mVAC

Antenna Card Filter Card

274JPW1-5T0 Communication lines used by the Wire Guidance Manager to tell the Load Antenna Card what frequency it should be looking for.

No useful voltages are measurable

CardAntenna Card

Publication Number: 1043922B, Revised: 2 Sept 2015 8-33