Technical data

M. Distance from center of tandem to end of machine 5‘ 4“ (1637 mm)

N. Distance from front axle to end of machine 25‘ 9“ (7856 mm)

O. Overall machine length without front blade and rear ripper 27‘ 11“ (8521 mm) P. Distance from center of rear axle to end of ripper 6’ 7” (2015 mm)

Q. Distance from front tires to front scarifier 5’ 0” (1520 mm)

R. Distance from front tires to front blade 5’ 4” (1620 mm)

Turning radius outside tires 23’ 9” (7250 mm) Ground clearance (rear axle) 14’ 9” (380 mm)

Ground clearance (front axle) 24’ 5” (622 mm)

CENTER OF GRAVITY POSITION

Filled with all fluids, including radiator coolant, hydraulic oil, full fuel tank and operator´s weight and ROPS cab.

X= 4450 mm Y= 950 mm

Y Y Y Y Y

x

RIGHT HAND, LEFT HAND, FRONT AND REAR OF THE MACHINE

The terms "right hand" or "left hand" as used in this manual stand for the right or left sides of the machine as viewed by the operator from his seating position facing machine forward direction of travel. The terms "front" and "rear" of the machine are as viewed by the operator from the same position.

FRONT

LEFT HAND RIGHT HAND

REAR

PRELIMINARY INSTRUCTIONS

PRELIMINARY INSTRUCTIONS

During machine delivery, it is the NEWHOLLAND dealer´s responsibility to provide customers with the main machine operating and maintenance instructions. The instructions are summarized as follows:

- Safety rules; - Water, fuel and oil filling control; - Removal of fuel system air (bleeding); - Fuel tank drain; - Engine run-in; - Engine and machine starting and stopping; - Tire pressure checks; - Lubrication and lubricants; - Air cleaner and fuel, lubricating oil and hydraulic filter service; - Cooling system servcice; - Hydraulic installation service; - Machine controls operation