844/642 Telehandler TRANSMISSION

STEP 71

Step 74

Fill the transmission with new fluid through the dipstick tube. See the Operator’s Manual for the specified transmission fluid.

Step 75

Start the engine and check for leaks. If no leaks appear continue to run the engine and test the transmission, steering and hydraulic functions for operation. Check transmission level. Add fluid if necessary.

G0605064

Install the front hood. Complete Steps 1 through 5 of Section 800 for the correct procedures.

STEP 72

G0605069

Install the mid section hood. Complete Steps 47 through 53 of Section 800 for the correct procedures.

STEP 73

G0705072

Connect the negative (-) battery cable to the battery. Remove the wheel chocks.

Step 76

Check engine low idle and high idle speed. If necessary, adjust throttle cable to specifications.

Shut off the engine and check the hydraulic reservoir level. Add fluid if necessary.