1 minute read
Releasing the parking brake
Releasing the parking brake
M42_00-0657-71
Pull locking ring (2) up and push parking brake lever (20) forwards (B).
The parking brake is released (air charging noise can be heard).
M54.00-1794-71
The “Parking brake applied” indication display (A) on the display screen goes out.
Note:
A continuous warning tone sounds if the electrical system is switched off with the parking brake released.
Note:
To guarantee a faultless release of the parking brake, the supply pressure must be at least 5.5 bar. If the parking brake indicator lamp does not go out even if there is sufficient supply pressure available, there is a defect in the spring brake cylinder circuit or the emergency release circuit. Have the brake system checked by an EvoBus Service Partner immediately. Driver's area controls
