Rotary light switch

Driver's area controls

Rotary light switch

Rotary light switch

combines the following functions:

M54_00-1248-71 0 Switched off. 1 Side lamps. 2 Headlamps: Dipped-beam headlamps/main-beam headlamps (depending on the steering column switch position) with the ignition starter switch in position 2 (drive position).

Note:

In countries where traffic drives on the other side of the road to that in the country where the vehicle was registered, there is a risk of oncoming traffic being dazzled by the asymmetrical dippedbeam headlamps. Observe local rules and regulations when driving in these countries (mask headlamps if necessary). 3 Front foglamps (pull switch, first position). In addition to the side lamps, dippedbeam headlamps or mainbeam headlamps if the ignition starter switch has been switched to ON. Indicator lamp (3.1) in the rotary light switch lights up. 4 Rear foglamp (pull switch, second position). In addition to the front foglamps. Indicator lamp (4.1) in the rotary light switch lights up. When a trailer or skibox is connected, the rear foglamp on the towing vehicle is disabled and only the rear foglamp connected via the trailer socket is enabled.