Operating pressure

Operation

Operating pressure

Operating pressure

Note:

Precondition: Minimum operating pressure of 5.5 bar.

Danger.

Risk of accident. To ensure maximum operating safety and reliability, a supply pressure of at least 6.8 bar is required in the individual compressed-air circuits. A leaking compressed-air brake system jeopardises the operating safety and roadworthiness of the bus. Stop immediately (traffic conditions permitting) if the supply pressure in the brake system is too low. Have the brake system checked at an EvoBus Service Partner.

Select the monitoring menu, operating pressure submenu.

M54.00-1776-71

The following appears on the display screen: Available “supply pressure” (A) in brake circuits 1 and 2 and “supply pressure” (B) in the auxiliary consumers circuit.

Note:

The maximum supply pressure (A) for brake circuits 1 and 2 is approximately 12 bar.

Note:

If the supply pressure falls below 6.8 bar, the “Operating pressure” pop-up window appears on the display screen automatically and the warning lamp for the red warning level lights up in the instrument cluster and in the lower permanent display field.