POWER TAKEOFF (PTO):HST

Mid PTO (OPTION)

The Mid PTO has a 25.4 mm(1 inch) diameter 15 spline output shaft.

ENGAGE THE MID PTO AS FOLLOWS:

1. Push the clutch pedal fully.

2. Move the Mid PTO control lever to the ON position.

3. Release the clutch pedal slowly.

DISENGAGE THE MID PTO AS FOLLOWS:

1. Push the clutch pedal fully.

2. Move the Mid PTO control lever to the OFF (Engine Start) position.

NOTE: Keep the Mid PTO control lever in the OFF (Engine Start) slot when starting the engine and when the PTO is not being used.

3. Release the clutch pedal.

The following table shows the required engine speed to get the required Mid PTO output shaft speed.