130 LX BLADE OPTION

1 Lever

2

BC00N053 BC00N055

1.Push the lever, and the blade will lower. 2.Pull the lever, and the blade will raise.

BC00N056

CAUTIONS for blade operation: Blade is for light duty work such as pushing soft dirt or mud only! ● Do not push down hard on the blade or it may cause damage to the blade and foot. ● To avoid damage to the blade, do not side load the blade. ● When using the blade to support the front of the machine during operation, ensure that the blade is firmly supported over the full length of the blade. This will prevent damage to the blade.

Travel control levers and pedals Optional auxiliary hydraulic control pedal

CD00E012 For machine travel, see “Machine travel” in the “Operating Instructions” Section. NOTE: Travel speed either forwards or in reverse depends on the position of the travel speed selector. See “Systems display panel” (item 1). NOTE: The movements of the machine are shown in the “Control functions” decal. See “Decals” in the “Safety/ Decals/Hand signal” Section.

CD00E012 This pedal is used for optional tools such as hydraulic breakers, etc. See “Auxiliary hydraulic circuits” in the “Operating Instructions” Section. IMPORTANT: Ask your authorized LBX Link-Belt distributor for advice on optional tools.

Footrest

CD00E012

Cab light Cigarette lighter

CD00E013 The light is located on the right-hand cab upright and is controlled by a switch set in the lamp base.

Coat hanger hook

BD00J048 The cigarette lighter (24 volt) is to the right at the rear of the cab. IMPORTANT: Do not keep the cigarette lighter pushed in, to avoid damage.

Fuse box

CD00E013 This hook is on the right-hand cab upright.

CD00E059 To gain access to the fuses, open the hatch to the left behind the operator’s seat and then remove the fuse box cover. To replace a fuse, see “Fuses” in the “Electrical system” Section.

Roof hatch Storage trays

CD00E015 To open the roof hatch, turn the handle and push the hatch upwards. To close the roof hatch, pull the handle. IMPORTANT: Since roof hatch closing is assisted by two gas struts, simply follow through the closing movement without pulling or trying to hold it back.

Cab door sliding windows

Storage compartment

BD00J048

CD00E032

CD00E016 When the locks are released, the windows can be opened and closed to the left/right as required.

CD00E017 Located behind the operator’s seat, this compartment is used, among other things, for storing the machine’s technical documentation and conformity certificates.

Cab radio compartment

BD00J048 The 12 volt automotive type radio is located on the rear right-hand side of the operator’s seat. A CD player, or similar electronic device, can be mounted below the radio in the pre-cut space provided.