Control and operation

To adjust the angle of the seat:

Pull lever 4 up.

By applying pressure on the seat, move it to the correct position.

Setting the backrest

To set the backrests:

Pull lever 10 up to release the backrest.

By applying pressure on the seat, move it to the correct position. Release the lever 10 to lock the backrest.

Setting the horizontal seat position

Fig. 3-33 Setting the horizontal

To adjust the horizontal position of the seat: Pull up the lever 1 Move the seat backwards or forwards to the correct position.

Fasten / release the safety belt

Fig. 3-34 Safety belt

The safety belt is automatic.

To adjust the belt length: Pull the belt and buckle 2 out of the roller mount 1. If pulled out of the roller mount suddenly, the belt can lock. Push the buckle into the belt lock 3 until it fastens.

Danger!

The safety belt is designed to protect the operator. Before starting the machine, always fasten the safety belt. Make sure that the safety belt is not twisted when it is fastened. For safety reasons, check the condition, function and fastening of the belt regularly and replace any damaged parts without delay.

To open lock 4, push down on the belt lock using your thumbs. The safety belt will slide automatically back into the roller mount 1.

3.2.4Auxiliary seat

The auxiliary seat 1 is a folding seat located near the operator. A storage cabinet 2 is installed under the auxiliary seat.

Move the folding seat

Pull up or down the seat 1 to move it in position. When there is no one on the auxiliary seat, the folding seat automatically pulls up against the cab wall.