Control and operation

The related numerical value is also shown under the dial needle. If a measured value is out of the possible range (e.g. in case of defective sensor):

In this case, contact Liebherr customer service. If the signal transmitting communication is broken:

NO SIGNAL!"

-50" for standard values (e.g. temperature, pressure)

-1" for strictly positive values (e.g. percentage, speed)

In this case, contact Liebherr customer service.

Error warning symbols

The error warning symbols can be shown anywhere in the central field 2. If all the symbol locations are on, the system show the most important symbols. If the same error occurs on different elements, the error symbol is on and the different related parameters flash alternatively.

For errors description, refer to the section "Indicator and error warning symbols".

Camera views

The main screen has two windows, which show the image from the monitoring cameras.

Push the "Main screen" button to go back to the camera views from all others menus.

Buzzer and links field

3

"Buzzer" function

The buzzer symbol is off (black color) until an error message occurs. When it occurs, the buzzer symbol becomes grey and the buzzer sounds.

When the buzzer sounds, push the "Buzzer" button to switch it to off.

Links to the monitoring menus

The available monitoring menus from the main screen are:

Diag"

Check"

Info"

Settings"

Monitoring menus

Select a monitoring menu

Monitoring menus

Menu "Diag"

The menu "Diag" is used to collect and save all the errors which occur during the operation. With this menu, you can see the error codes list in chronological order of occurrence.

Push the "Diag" button to access to this menu from all others menus.