TO OUR CUSTOMER

Thank you for purchasing an ISEKI tractor.

This operator’s manual provides the information necessary for operating and maintaining your tractor safely and properly.

The contents are mainly composed of the following 2 items:

Safety instructions: Essential items which you should observe while operating the tractor. Technical instructions: Items which are necessary to operate, adjust and service the tractor properly.

Before starting to operate the machine for the first time, you should read this operator’s manual thoroughly and carefully until you are sufficiently familiar with the operation of the machine in order to do jobs safely and properly. The manual should be regarded as part of the machine, and should be kept in a handy place so you can refer to it when required. You are advised to refer to it from time to time to refresh your understanding of the machine.

Your dealer has performed the pre-delivery service on your new machine. They will discuss with you the operating and maintenance instructions given in this manual, and instruct you in the proper and varied applications of this machine. Call on them at any time when you have a question, or need equipment related to the use of your machine.

Paragraphs in the manual and labels on the machine are particularly important information about safe operation to avoid accidents. You should always keep precautions in mind and follow them during operation.

Be sure to wear personal protective equipment during operation

In some of the illustrations used in this operator’s manual, panels or guards may have been removed for explanation. Never operate the tractor with these panels and guards removed. If the removal of a shield is necessary to make a repair, it must be replaced before operation.

If you use a trailer, use a proper one which suits your tractor. Using an improper trailer may cause serious accidents.

Never attempt to haul beyond the tractor’s capacity.

Follow strictly the instructions outlined in the operator’s manual of the mounted or trailed machinery or trailer, and do not operate the combination tractor – machine or tractor – trailer unless all instructions have been followed.

All information, illustrations, and specifications contained in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.

Table Of Contents

........................46

Engine Speed Control ........................................46

Forward / Reverse Lever ....................................46

Shift Levers ........................................................47

Changing Traveling Speed .................................47

STOPPING TRACTOR ...........................................49

DIFFERENTIAL LOCK OPERATION ......................50

4-WHEEL DRIVE ....................................................50

POWER TAKE-OFF (PTO) .....................................52

PTO Operating Controls .....................................53

Stationary PTO Switch ........................................54

3-POINT LINKAGE..................................................55

Link Controls .......................................................55

Attaching Implements .........................................57

Using Position Control ........................................57

Detaching Implements ........................................58

EXTERNAL AUXILIARY HYDRAULICS ..................59

REAR HITCH ..........................................................60

ROLL OVER PROTECTIVE STRUCTURE (ROPS) ...................................................................62

Rear ROPS Type ................................................62

How to Tilt ROPS ................................................62

Center ROPS Type .............................................63

Cushion rubber ....................................................64

SEAT & SUSPENSION ADJUSTMENT ..................64

7 PINS SOCKET .....................................................65

BEACON SWITCH ..................................................65

TOWING..................................................................66

FRONT LOADER FIXATION POINT .......................66

FALLING OBJECTS PROTECTIVE STRUCTURE (FOPS) & OPERATORS PROTECTION STRUCTURE (OPS) FIXATION POINT ..............................67

JACKING .................................................................67

LUBRICATION & PERIODIC MAINTENANCE ..........68 SPECIFICATIONS & CAPACITIES .........................68

Engine Oil ...........................................................68

Engine Coolant ...................................................68

Fuel Tank ............................................................68

Transmission (Including Hydraulic System) ........68

Front Axle ............................................................68

Grease Fittings....................................................68

LUBRICATION / FILL POINTS ................................69

PERIODIC MAINTENANCE SCHEDULE ...............70

SERVICE ACCESS .................................................72