Replacing Bar Holder

Before performing any maintenance or service work, lower the attachment to the ground and shut off the engine. Turn off any master shut-offs and do not allow personnel in the cab.

When working on the saw chain always ensure the engine is shut off and wear safety gloves to prevent injuries. Remove the saw chain when making any adjustments or servicing the saw unit.

When replacing the bar holder, do as described below. Stop the machine and rest the unit securely on the ground. Remove the saw chain. . Remove the saw bar. . Loosen the guide screws (2), use wrench size 16mm or the tool P/N 0704040, so that the bar holder (1) can be removed from the tensioning device (3).

Never start the machine with the bar holder removed. Inspect and clean the grooves (4). Assemble the new bar holder (1) into the tensioning device (3). Position the guide screws (2) into the grooves (4) and tighten. Install the saw bar. . Install the saw chain. .

Fig. 22Replacing Bar Holder Bar Holder Guide Screws, 2 pcs. Tension Device Grooves