Assembly

CAUTION: Wear protective clothing and safety equipment appropriate to the job. Work safely to avoid injury and observe all safety messages.

Read all assembly instructions and carefully observe illustrations.

Install Safety Chain

Attach safety chain by pinning shackle through hole in bracket on left front side of drawbar assembly. Secure with the shackle pin and cotter pin.

Bearing Wear Plates

Note : All models equipped

The heavy duty bearing wear plates come from the factory already installed on the bearing assemblies. If it becomes necessary to replace a wear plate, follow these instructions: Remove the mounting bolts from the bearing assembly, and place the bolt heads into the slots of the wear plate. Now, insert the mounting bolts through the bearings and secure to gang carrier bearing standards with the hex jam nuts and hex nuts provided.