Maintenance – Annually

7. Tilt the machine to the opposite side and secure it properly.

NOTICE!

Components may get damaged!

Do not use low-ash engine oils for the exciter shaft housing.

Observe filling quantity ÄChapter 8.3 ‘List of fuels and lubricants’ on page 74

8. Fill in new oil.

9. Stand the machine horizontally and check the oil level. ð Nominal value: Bottom edge of filling/drain bore.

10. Clean the bleed screw and filling/drain plug and screw them in with a low-strength sealing agent (e.g. spare parts number: DL 009 700 16).

11. Dispose of oil in line with environmental regulations.

8.8.8 Checking the hydraulic oil level

Protective equipment: n Working clothes n Safety shoes n Protective gloves

1. Park the machine safely ÄChapter 6.5 ‘Parking the machine in secured condition’ on page 61

2. Move the steering rod to an upright position and engage the locking pawl lever securely.

3. Clean the area around the oil level inspection plug and unscrew the plug.

4. Press the handle forward against the end stop and hold it in this position.