Summary of Periodical Maintenance Procedures

For more detailed instructions on engine adjustments and maintenance, see the engine manual. Daily: Every 300 working hours or yearly:

Lubricate the points to be lubricated daily. Change the engine oil and filter.

Check the engine oil level. Check the purity of the radiator and the inlet screen. Change the engine air filters. Change the fuel filters. Lubricate the fan variator hub (Oil).

Check the radiator coolant level.

Lubricate the pedal shafts (Oil). Check the hydraulic oil level. Lubricate the gear lever joints and bearings (Oil). Check the fluid and oil connections for leaks. Lubricate the engaging levers (Oil). Check the function of the alarm system. Lubricate the throttle levers (Oil). Check the condition of the cab air filter. Change the cab air filter. Check the purity of the AC condenser. Check the fluid level in the battery. Check the condition and tension of belts visually. Check the hydraulic hoses visually. Check the chopper knives visually. Check the engine intake air hoses and coolant hoses for leaks. Replace at least every 10 years. (Check when manufactured on the hose.)

Every 50 working hours:

Lubricate all the points specified in the table. Check the battery fluid level. Clean the outer element of engine air filter. Clean the breathers on the hydraulic containers on the outside. Check the gearbox oil level. Check the oil level in the engine split gear Check the oil level in the final drives Check the oil level in the knife drive device Check the knife condition. Check the concave basic setting. Check the condition of the threshing equipment. Check the condition of the power transmission equipment. Every 600 working hours or yearly:

Change the oil in the gearbox. Change the oil in the engine split gear. Change the oil in the knife drive device. Change the oil in the return auger wobble box. Lubricate the bearings on the left-hand side of the threshing cylinder and rear beater. Lubricate the bearings on the shaker shoe crankshaft. Change the hydraulic oil and filter. (Always before the harvesting season.) Lubricate the middle shaft of the stairs. Lubricate the hinges and lock on the cab door.

Check the tension of belts and chains.

Sensitize the friction plate type of safety clutches Check the operations of safety clutches. always before the harvesting season (feeding Check and clean the cab air filter. auger, crop elevator top shaft, return auger angle Check the tension of the grain elevator chain. gear, grain elevator). Check the tension of the crop elevator chain. Check the condition of the hydraulic hoses. Check the brake functions. Replace at least every 10 years. (Check when Check the brake fluid level. manufactured on the hose.) Check the light functions. Check the tyre pressures. Lubricate the carrier at the bottom of the filling auger in the grain tank. Every 1200 working hours or every other year:

Change the oil in the final drives. Replace the breather valve in hydraulics.

Every other year:

Change the radiator fluid in the engine. Change the brake fluid.