T ank indicator sensor installation (filter clog warning)

Remove the elbow and pilot P and T lines from the hydraulic tank (*1) and then install the tee (64)

Install the pressure sensor (65) the tee (64) .

SMIL15CEX2505FB 1

Connect the sensor wire harness (66) the pressure sensor (65)

Connect the sensor wire harness (66) the frame main wire harness (*4)

Fasten the sensor wire harness (66) with the special bolt (70) and the clip (69)

Connect the sensor wire harness (66) the pressure sensor (65)

Boom line installation 3 - 1

I

Installation nameplate inside cab 3K

Kit content 1 - 1 P

Preparation 2 - 1 S

Service valve (remote control valve) harness installation 3 -

Service valve (remote control valve) installation 3 -

Service valve (remote control valve) pilot line installation 3T

T ank indicator sensor installation (filter clog warning) 3U

Upper main line installation 3 - 5

SER VICE - T echnical Publications & T ools

© 2015 CNH Industrial Italia

All rights reserved. part the text illustrations this publication may reproduced.

CNH policy one continuous improvement and the right change specification equipment any time without notices

All data given this publication subject production Dimensions and weight are approximate only and the illustrations not necessarily show products standard For exact information about any particular please consult your CNH Dealer