ADJUSTING THE CLUTCH RELEASE LEVERS

DT 310/310 G

60 05 005 900

77 01 388 430 77 01 388 435

77 01 388 430

301msm24

– Fit the centering tool No.7701388435 and stop hub No.6005005900, adjustment template No.7701388430.

Note: The template fitted is calibrated to the dimension of the release levers.

– Bear the template against the flywheel (1). – Tighten the three PTO release lever nuts(10) until resistance is felt taking care not to move the template(Use a thin shim). Lock the nuts usingLoctite(243). – Tighten the three screws (11) on the vehicle drive release levers until resistence is felt then tighten the lock nuts (12) taking care not to move the template (Use a thin shim). Lock the nuts usingLoctite(243). – Re-attach the gearbox casing to the engine crankcase. – Re-tighten the casing attachments to a torque of6 to8daN·m.

Fig. 13