ADJUSTING THE EXTERNAL REVERSER CONTROL

9 12 14

10

11

323msm0x

– Remove the left-hand instrument panel lining. – Check that the threading (9) of the control cable protrudes by 20mm from the locknut. – Remove the axis of the lower yoke (10) on the gearbox side. – Pull back the reverser lever (11) until the reverse gear is locked. – Refit the yoke onto the lever.

12

13

6 mm 6 mm

Fig. 8

– Check in the cab that a 6mm gauge can be inserted between the edge of the lever (12) and the lever support slit (13). – Adjust the adjustment using nuts (9) of the sheath.

Note: After adjusting, check that the lever (12) does not interfere with the bellow holder (14) in the forward or reverse position.