1 minute read
Fitting safety fixings
8
F
9
• Press emergency stop switch to clamp wrapper and make it safe.
CAUTION!
At this stage, bale twister is in intermediate transport position and appears as on fig.8: table is jammed hydraulically in this position.
DANGER!
Damage to bale twister. ☞Do not transport wrapping baler when bale twister is in intermediate transport position.
–Stop tractor engine. –Remove ignition key. (Fig.6,7,8)
Fitting safety fixings
–Push twister by hand carefully towards fixing (F) to align lever holes with those of hinge brackets: bale twister must not collide with housing of driving gears for wrapping arms.
DANGER!
Risk of fatal injury. If bale twister falls accidentally, this can cause serious injury. ☞Make sure that emergency stop switch is in safety position before handling bale twister. ☞Make sure that engine is switched off and that ignition key has been removed.
(Fig.9)
L
M
N
M
N L
J 10
–Jam left and right levers (N) with pins (M) and spring clips (L).
DANGER!
Damage to bale twister. ☞Do not transport wrapping baler when bale twister is not set in safety position.
(Fig.10,11)
Locking for transport
–Pull cable or handle (J) while continuing to push bale twister towards attachment by hand, to engage bale twister locking pin in fixing lug. (Fig.12)
