Rotor

40

53

54

73073

55

QUANTUM6800 S/ 5500S-18 from serial no.614002243

56

ON

OFF 40 41

56

73074

61

60

59 58 ON

OFF

57

QUANTUM6800 S/ 5500S-18 from serial no.614002243

62 63 44

41

Install the top plate(40) with rod(55) on the front plate and fasten on both sides with washer(54) and split pin(53). (Fig.13)

13

14

Install fill indicators(60) (reed contacts) on bracket(41) with two screws each.

ATTENTION!

Look out for pinch and crush points when laying out the wiring. – Lay out wiring so it cannot be pinched or crushed during operation.

Install wiring(56) through the cross member of the top plate(40) on the right side. Connect wires (ON-ON; OFF-OFF). The top reed contact is connected to the “ON” connection. Fasten wiring with self-locking straps. Insert the strap(59) with the sensor magnet through the guides of the bracket(41). Fasten strap(59) and roof plate(40) with the pins(61) to the bracket(41). Secure pins(61) with washer(58) and roll pin(57). (Fig.14)

Wind tension ropes(63) around the hoops(44) at the rear and attach at the front to the hooks(62) of the bracket(41). (Fig.15)

73075

15