Removing the deflection pulley of knife drive(40) ........ 4.4

5

4

33

6

4 5

3

Right-hand machine side: –Mount potentiometer (3) completely with bracket and linkage. –Bolt down cable guide (5) and cable clamps (4). –Connect plug to potentiometers (3). (Fig.15)

Left-hand machine side: –Mount potentiometer (3) completely with bracket and linkage. –Bolt down cable guide (5) and cable clamps (4). –Connect plug of potentiometer (3). –Bolt down guard (6). (Fig.16)

Fully retract the VARIO table and let the table lock (2) catch. (Fig.2)

15

16

Adjusting the potentiometer sensing band, see page3.1.6 Installing the wobble transmission (spare part no.643656.1 and spare partno.643656.2), see page4.3.22 Installing the wobble transmission (spare part no.637534.0), see page4.3.35 Installing and adjusting the knife drive belt(40), see page4.3.2 Installing the crop dividers, see page2.1.1 Insert feed plates and move the reel tines to working position. Fold up and lock cutterbar cylinder safety locks. Carry out a test run.