Operator’s Seat - Front View

OPERATOR’S SEAT

Operator’s Seat - Front View

The operator’s seat has been selected to provide a maximum of operator comfort along with easy control access for increased productivity. The seat has numerous adjustments allowing it to be tailored to meet the individual needs of each operator.

Weight Adjustment

The seat should be adjusted for the operator’s weight by pulling the actuator lever of the automatic weight and height adjuster while the operator is sitting in the seat and the machine is stationary.

Height Adjustment

The seat height is adjusted pneumatically by pulling or pressing the adjustment leveras required to obtain the position required. DO NOT operate the compressor unit for more that 1 minute continuously.

Seat Cushion Angle Adjustment

The angle of the seat cushion can be adjusted individually from the back. Lift the handle and exert pressure in the desired direction while seated. Release handle once the required position is achieved.

Seat Depth Adjustment

The depth of the seat pan can be individually adjusted. Lift the handle and slide the seat pan forward or backwards to position. Release the handle when the desired position is obtained.

Armrest Adjustment

The armrests can be adjusted to fit the individual needs of each operator or folded up and placed out of the way. To adjust the armrest height loosen the manual friction knobs on the outboard side of the armrest allowing the armrests to pivot. Move the armrest to any desired position within its range and retighten when desired. To raise the arm rests; lift at front and stow vertically.

Headrest Adjustment

The headrest can easily be adjusted by lifting, or tilting, headrest to the desired position.

Lumbar Support

The curvature of the backrest can be adjusted pneumatically by pressing the switches on the lower left rear of the backrest.

Backrest Adjustment

The backrest is adjusted by lifting the lever and then releasing once the desired position is obtained.