SPECIFICATIONS (Cont’d) 553

HYDRAULIC

System

PumpsEngine Driven, Gear Type Pump Capacity8.5 GPM (32,2 L/min.) @ 3000 RPM

System Relief at Quick Coupler 2000 PSI (13790 kPa)

Filter

10 Micron replaceable cartridge in the hydrostatic pump charge line.

Hydraulic Cylinders Double–acting

Fluid Lines

Fluid Type

3–spool, series type, open center w/float detent on lift and detent on auxiliary

SAE standard tubes, hoses & fittings

Bobcat Fluid (P/N 6563328) if fluid is not available, use

10W–30/10W40 Class SE motor oil for temperature above 0°F (–18°C)

5W–30 Motor Oil for temperatures below 0 °F (–18° C).

12 Volt Straight Drive

Gauges: Hourmeter, Fuel, Voltmeter, Engine Temperature.

Warning lights: Engine Temperature, Engine Oil Pressure, Hydraulic oil Temperature & Pressure

DRIVE SYSTEM

Main Drive Hydrostatic 4 wheel drive

Infinitely variable tandem hydrostatic piston pumps, driving 2 fully reversing hydrostatic motors

#60 HS endless roller chain & sprockets in sealed chaincase with oil lubrication

TIRES

Flotation

Reco mmended Pressure

27 x 8.50–15, 4 or 6 ply rating

Inflate tires to MAXI MUM pressure shown on the side wall of the tire. DO NOT mix brands of tires used on the same loader.

MELROE COMPANY APPROVED ATTACHMENTS & ACCESSORIES

These and other attachments are approved for use on this model Bobcat loader. Do not use unapproved attachments Attachments not manufactured by Melroe Company may not be approved.

The versatile Bobcat loader quickly turns into a multi–job machine with a tight–fit attachment hook–up . . . from bucket t o grapple to pallet fork to backhoe and a variety or other attachments. See your Bobcat loader dealer for more details o n the attachments and field accessories shown on the following pages.

Increase the versatility of your Bobcat Loader with a variety of bucket styles and sizes. Styles and sizes include:

BUCKETDESCRIPTIONS

48 inch Dirt Bucket

48 inch Dirt Bucket w/teeth

54 inch Light Material Bucket

54 inch Dirt Bucket

48 inch Utility Bucket

Sweeper

Angle Broom

Econo–Grade r

Cleans up construction sites. Cutting edge for scraping mud. Sweeps parking lots, warehouse, docks, etc. Sweeps and collects debris with one attachment.

Hydraulic Breaker

Put your Bobcat loader to work and clean up almost everything in sight with the hydraulically driven and controlled Angle Broom attachment. Use it to sweep driveways, sidewalks, parking lots, loading docks, warehouses, or countless other applications.

(Bob–Tach Mount)

Up to 150 ft.–lb. impact energy class. Bob–Tach mounted,. 2–position loader mounting frame for vertical and horizontal breaking. Quick–change tool system –variety of tools available. Low recoil operating cycle.

*SPECIAL APPLICATIONS KIT WHICH INCLUDES A 1/2 INCH LEXAN FRONT DOOR WITH 1/4 INCH TOP AND REAR WINDOWS MUST BE USED WHEN OPERATING THE BOB–TACH MOUNTED HYDRAULIC BREAKER.

Trencher Models LT204 & LT405

Adjustable depth skids for presetting digging depth. Prepares hard–packed ground for digging or landscaping. One–to–seven–tooth versatility. Standard five–tooth unit with additional teeth available. Rips asphalt for removal.

Two attachment options in one! Use it as an economical, but effective grader OR a box blade by utilizing locking end plates Angle of the seven–foot moldboard is manually adjusted. Blade pitch adjusted by hydraulically tilting the Bob–Tach.

Auger

Dig 6 inch. – 36 inch holes with speed and plumbline accuracy. Utilizing Bobca t Loader hydraulics, the heavy–dut y hydraulic auger bites in with low speed , high torque power. Because of a unique knuckle–joint design, the auger will dig vertical holes even though the Bobca t Loader is working on uneven terrain.

Versatile trenching ability. Use these Bobcat trencher attachments for a variety of jobs. The LT204 digs two or three feet deep and 4 to 12 inch trenching widths. The LT405 digs three to five feet deepand 5 to 12 inches wide. Hydraulic sideshiftto get close to walls. Optional trench cleaner.

Some attachments may not be available from your local dealer.