Replacing the LAN Board

NOTE: The LVDS cable needs to be disconnected to allow access for replacing the LAN board. 1. Lift the adhesive strip securing the LVDS cable in place and disconnect the cable from the Mainboard.

2. Push the RJ-45 connector through the Lower Cover as shown and place the LAN Board into the Lower Cover.

Step

Size

LAN Board M2*5 1

Quantity Screw Type

4. Connect the FFC cable to the LAN Board by pushing on the cable tab as shown.

5. Connect the LAN Board cable to the Mainboard and close the locking latch.