Intel

The Intel screen allows the user to control various CPU and graphics processor parameters.

NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Phoenix SecureCore(tm) Setup Utility Main Boot Exit SecurityInformation Intel

Silverthorne CPU Control Sub-Menu Poulsbo Control Sub-Menu Video (Intel IGD) Control Sub-Menu

ACPI Control Sub-Menu ItemSpecificHelp

This is the help for the hour field. Valid range is from 0 to 23. INCREASE/REDUCE: F5/F6

Clocl Gen Control: [Program]

F1 ESC Help Exit Select Item Select Menu F5/F6 Enter ChangeValues Select SubMenu F9 F10 SetupDefault SaveandExit

Parameter

Silverthorne CPU Control Sub-Menu Enter the CPU Control menu. • Hyperthreading • Processor Power Management • CPU Thermal Control Sub-Menu • No Execute Modem Mem Protection • Intel (R) Virtualization Technology • Set Max Ext CPUID = 3

Description Format/Option

Parameter

Poulsbo Control Sub-Menu

Video (Intel IGD) Control SubMenu

ACPI Control Sub-Menu

Clock Gen Control:

Description

Format/Option

Enter the Poulsbo control menu. • PCI Express Control Sub-Menu • Poulsbo USB Control Sub-Menu • Azalia - Device 27, Function 0: • SDIO - Device 30, Function 0/1/2: • PCI Clock Run: • Serial IRQ Quiet Mode: • Pop Up Mode Enable: • Pop Down Mode Enable: Enter the Video Control menu. • IGD - Device 2: • IGD - Boot Type: • IGD - LCD Control SubMenu • IGD - TV Control SubMenu • Pre-Allocated Memory Size: • Graphic Memory Aperture Size:

Enter the ACPI Control menu.

Enables you to specify the clock generation control for the clock circuit. • Active Trip Point: • Passive Cooling Trip

Point: • Passive TC1 Value: • Passive TC2 Value: • Passive TSP Value: • Critical Trip Point: • FACP - RTC S4 Flag

Value: • FACP - PM Timer Flag

Value: • HPET Support: • HPET Base Address: • ALS Support: • EMA Support: Option: Program or ?