Removing the Standard LCD Bezel

1. See “Removing the LCD Module” on page 78. 2. Remove the four screw caps and screws from the LCD Bezel.

3. Starting from the inside bottom edge, pry the Bezel away from the panel. Move along the bottom edge toward the hinges as shown.

Step

Standard LCD Bezel (red callout)

Standard LCD Bezel (green callout)

Size

M2.5*4 2

M2.5*5 2

Quantity Screw Type

5. Pry apart the upper right and left corners of the bezel.

6. Pry apart the top edge of the bezel as shown.

7. Lift the bottom edge of the bezel away from the LCD Module as shown. IMPORTANT: Do not completely remove the bezel; the Microphone cable is still attached to the bezel.

9. Disconnect the Microphone cable connector as shown and remove the bezel from the LCD Module.