Connector/Harness

Line Inspection Form OEM Wiring Connector/Harness

Description

Deutsch Connector to Transmission ECU 25 +/- 3 lbs. in. [2.82 +/- .33 N•m] Packard Connector to Push Button Controller 10 +/- 3 lbs. in. [1.1 +/- .33 N•m] NyoGel 760G lubricant is recommended on connector contacts No lubricant or foreign material on connector jackscrew No contaminants on connector contacts Harness anchor points within 6 in. [15.24 cm] of connectors No unanchored length of harness greater than 12 in [30.48 cm] No sharp bends in the harness Tie wraps on Harness Jacketing only Harness not anchored to objects that are free to move All connectors are fully mated and latches locked All unused connectors or pins should be plugged No exposed splices or wire strands Check DTM04 Connector on Actuator Housing

Yes No Corrected