Envirosun Ts Plus Solar Hot Water Heaters in Australia

ENVIROSUN TS PLUS SOLAR HOT WATER SYSTEMS

Envirosun Ts Plus Solar Hot Water Heaters Are One of the Highest Performing and Awarded Systems in Australia The Envirosun TS Plus 300 litre, 2 panel thermosyphon solar hot water heater is a superior made hot water unit, with the roof mounted cylinder is manufactured in Holland from a very high grade 444 Stainless Steel for a longer life expectancy, the bare stainless stell storage tank is imported and is all assembled in Victoria and comes with 2 of the highest rated solar panels in the market. Envirosun’s HS solar panels are manufactured by America’s Helidyne, a company of nearly 50 years and a leading supplier of quality solar heating systems worldwide. Envirosun also has a range of solar panels for far north Queensland, Northern Territory and other hotter areas closer to the equator where solar adsorption rates are extreme.

There is also the Envirosun THX Plus for high frost and colder climates

Therefore the Envirosun thermosiphon Plus range has a product suitable for nearly every region in Australia Envirosun TS Plus solar hot water system is approximately 1/2 the weight on other mild steel enamel lined rooftop solar hot water systems.

• • • • • • • •

Queensland New South Wales Victoria Western Australia South Australia Northern Territory ACT Tasmainia

ENVIROSUN TS PLUS SOLAR HOT WATER SYSTEM COME WITH 10 YEARS WARRANTY ON THE TANK AND SOLAR PANELS •

Envirosun’s Thermosiphon System (TS Plus) is one of the most advanced solar hot water systems available in todays market, offering a extremely high efficiency rate and a cost effective solution for most domestic homes. The hot water storage cylinder and the solar collector panels are roof-mounted together as one seamless combined unit. Water is heated in the flat plate solar collector, and natural convection of hot water rising moves the water through the system into an insulated storage tank located above the solar panels on the right hand side as cooler water from the tank falls from the left into the lowest part of the solar panels, minimizing any energy required.

This design has been in roof mounted solar water heaters since the development of solar water heating and outperforms other types of systems and offers a superior level of efficient, economical water heating. The clever design and engineering of the Envirosun Thermosiphon System utilises the strongest materials and state-of-the-art tank protection valves and systems to ensure a long operating life in all environments, from the freezing temperatures to extreme heat. The latest cutting edge technology and the cumulative advancements of Envirosun’s 25 years Industry Experience combine to offer the ultimate in durability, reliability and affordability.

Envirosun is a Australian owned company that is operated with true family values and integrity, with the highest level of quality control that makes the Envirosun TS Plus thermosyphon stainless steel solar hot water heater choice a smart one, not only financially but environmental and for a sustainable future Australia.

Contact us for more details on how we can supply you with this quality affordable solar hot water system.

HOW DOES AN ENVIROSUN TS PLUS SOLAR HOT WATER SYSTEM WORKS? The solar hot water storage tank and panels are connected together and located on the roof structure, facing in a northerly direction. Hot water has a natural fall and rise cycle, hot water rises and cold water falls to the lowest point, as the sun heats the water in the collector, it rises and then goes into a storage tank.

Hot water rises naturally in the tank – this process is called thermo-siphoning, that’s why this type of solar water heaters is known as thermosyphon solar hot water systems and the Envirosun TS Plus model The colder water at the bottom of the storage tank then travels into the lowest point of the solar collector panel and as it starts to heat up it rises in the solar panels to the highest point, then through a pipe to the storage tank.

The solar hot water panels are a sealed cased box with toughened glass face, a manifold of copper pipes and black powder coated copper absorption plates or fins to attract the heat and with the underside being fully insulated, traps the heat inside to give maximum solar gain and heat transfer to the water This process is a continuous cycle and can save the average household over 80% of their hot water energy usage and related greenhouse gas emissions, not to mention the money that is saved with this type of solar hot water systems.

BELOW IS A BIT OF TECHNICAL TALK ABOUT THE ENVIROSUN TS PLUS SOLAR HOT WATER HEATER RANGE

THE ENVIROSUN THERMOSIPHON STORAGE CYLINDER

ENVIROSUN PIONEERED AND MASTERED THE USE OF TYPE 444 FERRITIC STAINLESS STEEL IN THE CONSTRUCTION OF OUR TS PLUS SOLAR HOT WATER RANGE

444 STAINLESS STEEL EUROPEAN MADE 10 YEAR WARRANTY COMPARED WITH TRADITIONAL AUSTENITIC STAINLESS STEEL (SUCH AS TYPE 316L AND 304L) FERRITIC STAINLESS STEELS OFFER MAJOR PERFORMANCE ADVANTAGES. IN PARTICULAR, TYPE 444 OUT-LASTS TYPE 316L WHEN IT COMES TO RESISTING LOCALIZED CORROSION OR PITTING ATTACK AT ELEVATED WATER TEMPERATURES.

GENERALLY, TYPE 444 IS A HIGHLY DURABLE AND TROUBLE-FREE MATERIAL THAT OFFERS SIGNIFICANT LIVE CYCLE COST ADVANTAGES. STAINLESS STEELS DERIVE THEIR CORROSION RESISTANT PROPERTIES THROUGH THE INCLUSION OF STAINLESS STEEL. HOWEVER THE KEY TO THE ENHANCED PERFORMANCE OF THIS TYPE 444 IS THE ADDITION OF MOLYBDENUM AND CHROMIUM

AS FURTHER ALLOYING ELEMENTS (TRADITIONAL AUSTENITIC GRADES INCORPORATE NICKEL).

DURING THE FINAL STAGE OF THE FACTORY GUARANTEE PERIOD YOU SHOULD ARRANGE FOR AN END-OF-WARRANTY SERVICE TO BE CARRIED OUT. THESE QUALITY EUROPEAN MADE 444 STAINLESS STEEL CYLINDERS HAVE THE FINAL ASSEMBLY HERE IN AUSTRALIA THE SOLAR PANELS THE ABSORBER PLATES IN OUR SOLAR COLLECTORS ARE DESIGNED TO ABSORB MORE OF THE SUN’S ENERGY AND RADIATE LESS BACK TO THE ENVIRONMENT AS HEAT. To achieve this they undergo a two-stage electroplating process. They are first plated with a layer of bright nickel and then re-treated with an over-coat of black chrome. This creates a ‘spectrally-selective surface’ that absorbs more solar radiation and re-emits less thermal energy. The underlying mechanisms are relatively simple. In the short wavelength part of the spectrum, the absorber behaves like a black surface and soaks up most of the sun’s energy. In the long wave length part of the spectrum, the absorber behaves like a silver surface and re-radiates little of its heat.

Envirosun’s black chrome absorbers plates have the highest efficiency solar selective coating available and they deliver performance gains about 20% above those available from such non-selective treatments.

Envirosun Solar Hot Water Panels are secured inside high grade coated aluminium frames to reduce any corrosive materials on your roof

OUR COLLECTORS ARE FITTED WITH TRANSLUCENT AND VERY STRONG.

SOLAR

GLASS THAT

IS

HIGHLY

It’s intended as maximizing the amount of solar energy that is captured by the collector absorber plates (panels) while protecting them from impact damage. To explain, this, it’s first necessary to understand how a solar collector uses the ‘greenhouse-effect’ phenomenon to heat water.

As the sun’s ray’s fall on the glass cover is a form of short wavelength radiation.

Most of the solar radiation passes through the glass but some is reflected or absorbed. The transmitted portion of solar radiation that reaches the black copper absorber plate, heats it and the water that is contained inside the pipework. The hot absorber also re-radiates thermal energy (a form of long wavelength radiation) which, in the absence of a cover, would escape and allow the plate to cool. The glass cover, however, acts as a reflector of the long wavelength radiation and bounces it back to the absorber, thereby containing the heat. Glass that has higher iron levels absorbs more solar radiation and allows less to reach the absorber plates. Low-iron glass can transmit about 91% of the incident solar radiation. Envirosun solar glass is produced with very low levels of iron impurities. Envirosun solar glass is also tempered using a heat-treatment process.

Envirosun solar hot water systems have all the extras you will ever need for your TS Plus thermosiphon solar water heater

CONTACT INFO If you have any questions simply use the following contact details.

Email Address info@envirosun.com.au Phone Number (Sales) 1300 046 893 Phone Number (Service) 1300 046 893 Website : https://envirosunsunshinecoast.com.au/