How to fix common brother multifunction printer error codes

How to Fix Common Brother Multifunction Printer Error Codes Being a user of Brother multifunction or all-in-one printer, you may encounter some common printer error codes at times like a pop-up on your system screen or on the printer’s LCD control panel that can also put you at risk. However, these error messages are really helpful to troubleshoot your Brother Printer malfunctions and even can help you in solving the problems. If you don’t know what the common printer error code is and how can you fix it, you can ask the help of Brother Support technicians. Here’s a list of certain Brother Printer error codes:

Error Code S05: This Brother Printer error code may encounter while the data transferred through the parallel port are not transporting smoothly. So, try to reset your printer to fix the problems and get it going yet again. You can also consider getting help to the Brother Customer care for the solution.

Error Code E50: An error code like it happens when the Brother multifunction printer’s Fuser unit gets damaged. While it flashes, it’s a signal that you should replace the Fuser unit of your printer. If you don’t know how to do that, call at Brother Support number and seek resolution.

Error Code E51: If your Brother all-in-one printer’s lease beam, mirrors or lid are not placed appropriately, it can encounter the printer error code E51. So, check that the ink cartridge and all else in your printer is positioned accurately. If it doesn’t, then you must consult with the Brother Printer support professionals and ask the solution.

Black pages: In most cases, the ‘Black pages’ error message can display on the screen, or you can get a black page in printouts. At such time, you should reach out your nearest service center for the replacement of its diodes and jumper wires. Also, you can check for the paper sheet is aligned correctly.

Check paper path: When it happens, means that your Brother multifunction printer has a misaligned or dirty eject roller. Wipe it or straighten it up, whatever you can do, and then

try to print it again. If the problem still continues, dial the Brother Customer care number and get the support of technicians regarding the issues.

Poor print quality: If your Brother Printer outputs as the fax or the printouts are smudgy, it may be caused due to the dirty glass or the scanning mirrors. If they’re, then clean them.

Otherwise, the problem may be caused by your printer’s camera. At such time, unplug your printer for a few times, but if the problem exists, you should visit the Brother Service center for the replacement of your printer’s camera.

Source URL https://goo.gl/PojlKA